As the baby step, only unit tests are executed.
Failing tests are currently skipped and will be fixed in follow-up PRs.
Fix#2124
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
For some reason, libcontainer/integration has a whole bunch of incorrect
usages of libcontainer.Factory -- causing test failures with a set of
security patches that will be published soon. Fixing ths is fairly
trivial (switch to creating a new libcontainer.Factory once in each
process, rather than creating one in TestMain globally).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Finish off the work started in a344b2d6 (sync up `HookState` with OCI
spec `State`, 2016-12-19, #1201).
And drop HookState, since there's no need for a local alias for
specs.State.
Also set c.initProcess in newInitProcess to support OCIState calls
from within initProcess.start(). I think the cyclic references
between linuxContainer and initProcess are unfortunate, but didn't
want to address that here.
I've also left the timing of the Prestart hooks alone, although the
spec calls for them to happen before start (not as part of creation)
[1,2]. Once the timing gets fixed we can drop the
initProcessStartTime hacks which initProcess.start currently needs.
I'm not sure why we trigger the prestart hooks in response to both
procReady and procHooks. But we've had two prestart rounds in
initProcess.start since 2f276498 (Move pre-start hooks after container
mounts, 2016-02-17, #568). I've left that alone too.
I really think we should have len() guards to avoid computing the
state when .Hooks is non-nil but the particular phase we're looking at
is empty. Aleksa, however, is adamantly against them [3] citing a
risk of sloppy copy/pastes causing the hook slice being len-guarded to
diverge from the hook slice being iterated over within the guard. I
think that ort of thing is very lo-risk, because:
* We shouldn't be copy/pasting this, right? DRY for the win :).
* There's only ever a few lines between the guard and the guarded
loop. That makes broken copy/pastes easy to catch in review.
* We should have test coverage for these. Guarding with the wrong
slice is certainly not the only thing you can break with a sloppy
copy/paste.
But I'm not a maintainer ;).
[1]: https://github.com/opencontainers/runtime-spec/blob/v1.0.0/config.md#prestart
[2]: https://github.com/opencontainers/runc/issues/1710
[3]: https://github.com/opencontainers/runc/pull/1741#discussion_r233331570
Signed-off-by: W. Trevor King <wking@tremily.us>
Cgroup namespace can be configured in `config.json` as other
namespaces. Here is an example:
```
"namespaces": [
{
"type": "pid"
},
{
"type": "network"
},
{
"type": "ipc"
},
{
"type": "uts"
},
{
"type": "mount"
},
{
"type": "cgroup"
}
],
```
Note that if you want to run a container which has shared cgroup ns with
another container, then it's strongly recommended that you set
proper `CgroupsPath` of both containers(the second container's cgroup
path must be the subdirectory of the first one). Or there might be
some unexpected results.
Signed-off-by: Yuanhong Peng <pengyuanhong@huawei.com>
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
There is a race in runc exec when the init process stops just before
the check for the container status. It is then wrongly assumed that
we are trying to start an init process instead of an exec process.
This commit add an Init field to libcontainer Process to distinguish
between init and exec processes to prevent this race.
Signed-off-by: Mrunal Patel <mrunalp@gmail.com>
Previously if oomScoreAdj was not set in config.json we would implicitly
set oom_score_adj to 0. This is not allowed according to the spec:
> If oomScoreAdj is not set, the runtime MUST NOT change the value of
> oom_score_adj.
Change this so that we do not modify oom_score_adj if oomScoreAdj is not
present in the configuration. While this modifies our internal
configuration types, the on-disk format is still compatible.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
When running runc tests with temp directory with size 500M copying
busybox without preserving hardlinks causes the folder to inflate to
roughly 330M. Copying busybox twice in certain tests causes the /tmp
directory to overfill. Using `-a` preserves links which busybox uses to
implement its choice of binary to run.
Signed-off-by: Tom Godkin <tgodkin@pivotal.io>
Multiple conditions were previously allowed to be placed upon the
same syscall argument. Restore this behavior.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Handle err return value of fmt.Scanf, os.Pipe and unix.ParseUnixRights.
Found with honnef.co/go/tools/cmd/staticcheck
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
This moves all console code to use github.com/containerd/console library to
handle console I/O. Also move to use EpollConsole by default when user requests
a terminal so we can still cope when the other side temporarily goes away.
Signed-off-by: Daniel Dao <dqminh89@gmail.com>
Updated logrus to use v1 which includes a breaking name change Sirupsen -> sirupsen.
This includes a manual edit of the docker term package to also correct the name there too.
Signed-off-by: Steven Hartland <steven.hartland@multiplay.co.uk>
And Stat_t.PID and Stat_t.Name while we're at it. Then use the new
.State property in runType to distinguish between running and
zombie/dead processes, since kill(2) does not [1]. With this change
we no longer claim Running status for zombie/dead processes.
I've also removed the kill(2) call from runType. It was originally
added in 13841ef3 (new-api: return the Running state only if the init
process is alive, 2014-12-23), but we've been accessing
/proc/[pid]/stat since 14e95b2a (Make state detection precise,
2016-07-05, #930), and with the /stat access the kill(2) check is
redundant.
I also don't see much point to the previously-separate
doesInitProcessExist, so I've inlined that logic in runType.
It would be nice to distinguish between "/proc/[pid]/stat doesn't
exist" and errors parsing its contents, but I've skipped that for the
moment.
The Running -> Stopped change in checkpoint_test.go is because the
post-checkpoint process is a zombie, and with this commit zombie
processes are Stopped (and no longer Running).
[1]: https://github.com/opencontainers/runc/pull/1483#issuecomment-307527789
Signed-off-by: W. Trevor King <wking@tremily.us>
And use it only in local tooling that is forwarding the pseudoterminal
master. That way runC no longer has an opinion on the onlcr setting
for folks who are creating a terminal and detaching. They'll use
--console-socket and can setup the pseudoterminal however they like
without runC having an opinion. With this commit, the only cases
where runC still has applies SaneTerminal is when *it* is the process
consuming the master descriptor.
Signed-off-by: W. Trevor King <wking@tremily.us>
Since syscall is outdated and broken for some architectures,
use x/sys/unix instead.
There are still some dependencies on the syscall package that will
remain in syscall for the forseeable future:
Errno
Signal
SysProcAttr
Additionally:
- os still uses syscall, so it needs to be kept for anything
returning *os.ProcessState, such as process.Wait.
Signed-off-by: Christy Perez <christy@linux.vnet.ibm.com>
When process config doesnt specify capabilities anywhere, we should not panic
because setting capabilities are optional.
Signed-off-by: Daniel Dao <dqminh89@gmail.com>
CRIU gets pre-dump to complete iterative migration.
pre-dump saves process memory info only. And it need parent-path
to specify the former memory files.
This patch add pre-dump and parent-path arguments to runc checkpoint
Signed-off-by: Deng Guangxing <dengguangxing@huawei.com>
Signed-off-by: Adrian Reber <areber@redhat.com>
`HookState` struct should follow definition of `State` in runtime-spec:
* modify json name of `version` to `ociVersion`.
* Remove redundant `Rootfs` field as rootfs can be retrived from
`bundlePath/config.json`.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This fixes all of the tests that were broken as part of the console
rewrite. This includes fixing the integration tests that used TTY
handling inside libcontainer, as well as the bats integration tests that
needed to be rewritten to use recvtty (as they rely on detached
containers that are running).
This patch is part of the console rewrite patchset.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Switch to the actual source of the official Docker library of images, so
that we have a proper source for the test filesystem. In addition,
update to the latest released version (1.25.0 [2016-06-23]) so that we
can use more up-to-date applets in our tests (such as stat(3)).
This patch is part of the console rewrite patchset.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
This implements {createTTY, detach} and all of the combinations and
negations of the two that were previously implemented. There are some
valid questions about out-of-OCI-scope topics like !createTTY and how
things should be handled (why do we dup the current stdio to the
process, and how is that not a security issue). However, these will be
dealt with in a separate patchset.
In order to allow for late console setup, split setupRootfs into the
"preparation" section where all of the mounts are created and the
"finalize" section where we pivot_root and set things as ro. In between
the two we can set up all of the console mountpoints and symlinks we
need.
We use two-stage synchronisation to ensures that when the syscalls are
reordered in a suboptimal way, an out-of-place read() on the parentPipe
will not gobble the ancilliary information.
This patch is part of the console rewrite patchset.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
I use the same tool (https://github.com/client9/misspell)
as Daniel used a few days ago, don't why he missed these
typos at that time.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
For example, the /sys/firmware directory should be masked because it can contain some sensitive files:
- /sys/firmware/acpi/tables/{SLIC,MSDM}: Windows license information:
- /sys/firmware/ibft/target0/chap-secret: iSCSI CHAP secret
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
This removes the use of a signal handler and SIGCONT to signal the init
process to exec the users process.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
In user namespaces, we need to make sure we don't chown() the console to
unmapped users. This means we need to get both the UID and GID of the
root user in the container when changing the owner.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
No substantial code change.
Note that some style errors reported by `golint` are not fixed due to possible compatibility issues.
Signed-off-by: Akihiro Suda <suda.kyoto@gmail.com>
Akihiro Suda
Aleksa Sarai
W. Trevor King
Mrunal Patel
Yuanhong Peng
Dominik Süß
Mrunal Patel
Danail Branekov
Matthew Heon
Michael Crosby
Tobias Klauser
Daniel Dao
Steven Hartland
Christy Perez
Andrei Vagin
Deng Guangxing
Zhang Wei
Qiang Huang
Akihiro Suda
xiekeyang
Buddha Prakash
Zhao Lei
Petar Petrov
Akihiro Suda
George Lestaris