The Err() method should be called after the Scan() loop, not inside it.
Found by
git grep -A3 -F '.Scan()' | grep Err
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Remove joinCgroupsV2() function, as its name and second parameter
are misleading. Use createCgroupsv2Path() directly, do not call
getv2Path() twice.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Function getSubsystemPath(), while works for v2 unified case, is
suboptimal, as it does a few unnecessary calls.
Add a simplified version of getSubsystemPath(), called getv2Path(),
and use it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This code is a copy-paste from cgroupv1 systemd code. Its aim
is to check whether a subsystem is available, and skip those
that are not.
In case v2 unified hierarchy is used, getSubsystemPath never
returns "not found" error, so calling it is useless.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Cgroup v1 kernel doc [1] says:
> We can write "-1" to reset the ``*.limit_in_bytes(unlimited)``.
and cgroup v2 kernel documentation [2] says:
> - If a controller implements an absolute resource guarantee and/or
> limit, the interface files should be named "min" and "max"
> respectively. If a controller implements best effort resource
> guarantee and/or limit, the interface files should be named "low"
> and "high" respectively.
>
> In the above four control files, the special token "max" should be
> used to represent upward infinity for both reading and writing.
Allow -1 value to still be used for v2, converting it to "max"
where it makes sense to do so.
This fixes the following issue:
> runc update test_update --memory-swap -1:
> error while setting cgroup v2: [write /sys/fs/cgroup/machine.slice/runc-cgroups-integration-test.scope/memory.swap.max: invalid argument
> failed to write "-1" to "/sys/fs/cgroup/machine.slice/runc-cgroups-integration-test.scope/memory.swap.max"
> github.com/opencontainers/runc/libcontainer/cgroups/fscommon.WriteFile
> /home/kir/go/src/github.com/opencontainers/runc/libcontainer/cgroups/fscommon/fscommon.go:21
> github.com/opencontainers/runc/libcontainer/cgroups/fs2.setMemory
> /home/kir/go/src/github.com/opencontainers/runc/libcontainer/cgroups/fs2/memory.go:20
> github.com/opencontainers/runc/libcontainer/cgroups/fs2.(*manager).Set
> /home/kir/go/src/github.com/opencontainers/runc/libcontainer/cgroups/fs2/fs2.go:175
> github.com/opencontainers/runc/libcontainer/cgroups/systemd.(*UnifiedManager).Set
> /home/kir/go/src/github.com/opencontainers/runc/libcontainer/cgroups/systemd/unified_hierarchy.go:290
> github.com/opencontainers/runc/libcontainer.(*linuxContainer).Set
> /home/kir/go/src/github.com/opencontainers/runc/libcontainer/container_linux.go:211
[1] linux/Documentation/admin-guide/cgroup-v1/memory.rst
[2] linux/Documentation/admin-guide/cgroup-v2.rst
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
To the best of my knowledge, it has been decided to drop the kernel
memory controller from the cgroupv2 hierarchy, so "kernel memory limits"
do not exist if we're using v2 unified.
So, we need to ignore kernel memory setting. This was already done in
non-systemd case (see commit 88e8350de), let's do the same for systemd.
This fixes the following error:
> container_linux.go:349: starting container process caused "process_linux.go:306: applying cgroup configuration for process caused \"open /sys/fs/cgroup/machine.slice/runc-cgroups-integration-test.scope/tasks: no such file or directory\""
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Return earlier if there is an error.
2. Do not use filepath.Split on every entry, use info.Name() instead.
3. Make readProcsFile() accept file name as an argument, to avoid
unnecessary file name and directory splitting and merging.
4. Skip on info.IsDir() -- this avoids an error when cgroup name is
set to "cgroup.procs".
This is still not very good since filepath.Walk() performs an unnecessary
stat(2) on every entry, but better than before.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
fmt.Sprintf is slow and is not needed here, string concatenation would
be sufficient. It is also redundant to convert []byte from string and
back, since `bytes` package now provides the same functions as `strings`.
Use Fields() instead of TrimSpace() and Split(), mainly for readability
(note Fields() is somewhat slower than Split() but here it doesn't
matter much).
Use Join() to prepend the plus signs.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Golang 1.14 introduces asynchronous preemption which results into
applications getting frequent EINTR (syscall interrupted) errors when
invoking slow syscalls, e.g. when writing to cgroup files.
As writing to cgroups is idempotent, it is safe to retry writing to the
file whenever the write syscall is interrupted.
Signed-off-by: Mario Nitchev <marionitchev@gmail.com>
* TestConvertCPUSharesToCgroupV2Value(0) was returning 70369281052672, while the correct value is 0
* ConvertBlkIOToCgroupV2Value(0) was returning 32, while the correct value is 0
* ConvertBlkIOToCgroupV2Value(1000) was returning 4, while the correct value is 10000
Fix#2244
Follow-up to #2212#2213
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
In case systemd is used to set cgroups for the container,
it creates a scope unit dedicated to it (usually named
`runc-$ID.scope`).
This patch adds an ability to set arbitrary systemd properties
for the systemd unit via runtime spec annotations.
Initially this was developed as an ability to specify the
`TimeoutStopUSec` property, but later generalized to work with
arbitrary ones.
Example usage: add the following to runtime spec (config.json):
```
"annotations": {
"org.systemd.property.TimeoutStopUSec": "uint64 123456789",
"org.systemd.property.CollectMode":"'inactive-or-failed'"
},
```
and start the container (e.g. `runc --systemd-cgroup run $ID`).
The above will set the following systemd parameters:
* `TimeoutStopSec` to 2 minutes and 3 seconds,
* `CollectMode` to "inactive-or-failed".
The values are in the gvariant format (see [1]). To figure out
which type systemd expects for a particular parameter, see
systemd sources.
In particular, parameters with `USec` suffix require an `uint64`
typed argument, while gvariant assumes int32 for a numeric values,
therefore the explicit type is required.
NOTE that systemd receives the time-typed parameters as *USec
but shows them (in `systemctl show`) as *Sec. For example,
the stop timeout should be set as `TimeoutStopUSec` but
is shown as `TimeoutStopSec`.
[1] https://developer.gnome.org/glib/stable/gvariant-text.html
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
A new method was added to the cgroup interface when #2177 was merged.
After #2177 got merged, #2169 was merged without rebase (sorry!) and compilation was failing:
libcontainer/cgroups/fs2/fs2.go:208:22: container.Cgroup undefined (type *configs.Config has no field or method Cgroup)
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
`configs.Cgroup` contains the configuration used to create cgroups. This
configuration must be saved to disk, since it's required to restore the
cgroup manager that was used to create the cgroups.
Add method to get cgroup configuration from cgroup Manager to allow API users
save it to disk and restore a cgroup manager later.
fixes#2176
Signed-off-by: Julio Montes <julio.montes@intel.com>
split fs2 package from fs, as mixing up fs and fs2 is very likely to result in
unmaintainable code.
Inspired by containerd/cgroups#109
Fix#2157
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
As the baby step, only unit tests are executed.
Failing tests are currently skipped and will be fixed in follow-up PRs.
Fix#2124
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
/proc/cgroups is meaningless for v2 and should be ignored.
https://github.com/torvalds/linux/blob/v5.3/Documentation/admin-guide/cgroup-v2.rst#deprecated-v1-core-features
* Now GetAllSubsystems() parses /sys/fs/cgroup/cgroup.controller, not /proc/cgroups.
The function result also contains "pseudo" controllers: {"devices", "freezer"}.
As it is hard to detect availability of pseudo controllers, pseudo controllers
are always assumed to be available.
* Now IOGroupV2.Name() returns "io", not "blkio"
Fix#2155#2156
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
The `static_build` build tag was introduced in e9944d0f
to remove build warnings related to systemd cgroup driver
dependencies. Since then, those dependencies have changed and
building the systemd cgroup driver no longer imports dlopen.
After this change, runc builds will always include the systemd
cgroup driver.
This fixes#2008.
Signed-off-by: James Peach <jpeach@apache.org>
Implemented `runc ps` for cgroup v2 , using a newly added method `m.GetUnifiedPath()`.
Unlike the v1 implementation that checks `m.GetPaths()["devices"]`, the v2 implementation does not require the device controller to be available.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Kir Kolyshkin
Mrunal Patel
Mrunal Patel
Qiang Huang
Akihiro Suda
Mario Nitchev
Danail Branekov
Aleksa Sarai
Boris Popovschi
Julio Montes
Michael Crosby
James Peach