This fixes the following warning, and implements a suggestion:
> In update.bats line 426:
> IFS='/' read -r -a dirs <<< $(echo ${CGROUP_CPU} | sed -e s@^${CGROUP_CPU_BASE_PATH}/@@)
> ^-- SC2046: Quote this to prevent word splitting.
> ^-- SC2001: See if you can use ${variable//search/replace} instead.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Fixes the following warning:
> In update.bats line 422:
> local root_period=$(cat "${CGROUP_CPU_BASE_PATH}/cpu.rt_period_us")
> ^---------^ SC2155: Declare and assign separately to avoid masking return values.
>
>
> In update.bats line 423:
> local root_runtime=$(cat "${CGROUP_CPU_BASE_PATH}/cpu.rt_runtime_us")
> ^----------^ SC2155: Declare and assign separately to avoid masking return values.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Fixes the following warning:
> In cgroups.bats line 58:
> if [ "$KERNEL_MAJOR" -lt 4 ] || [ "$KERNEL_MAJOR" -eq 4 -a "$KERNEL_MINOR" -le 5 ]; then
> ^-- SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. cd is useless as all the paths are absolute
2. run is redundant, does not make sense to use it
3. use mkdir -p to save a line of code
This also eliminates shellcheck warnings like this one:
> In spec.bats line 8:
> cd "$INTEGRATION_ROOT"
> ^--------------------^ SC2164: Use 'cd ... || exit' or 'cd ... || return' in case cd fails.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
It's not a regex but a substring, so use a substring match.
Fixes the following warning by shellcheck:
> In mounts.bats line 20:
> [[ "${lines[0]}" =~ '/tmp/bind/config.json' ]]
> ^---------------------^ SC2076: Don't quote right-hand side of =~, it'll match literally rather than as a regex.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The ending EOF should be
- all by itself (i.e. no extra characters on the same line);
- with no whitespace before it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
TL;DR: this allows to show logs from failed runc restore.
Bats scripts are run with `set -e`. This is well known and obvious,
and yet there are a few errors with respect to that, including a few
"gems" by yours truly.
1. bats scripts are run with `set -e`, meaning that `[ $? -eq 0 ]` is
useless since the execution won't ever reach this line in case of
non-zero exit code from a preceding command. So, remove all such
checks, they are useless and misleading.
2. bats scripts are run with `set -e`, meaning that `ret=$?` is useless
since the execution won't ever reach this line in case of non-zero
exit code from a preceding command.
In particular, the code that calls runc restore needs to save the exit
code, show the errors in the log, and only when check the exit code and
fail if it's non-zero. It can not use `run` (or `runc` which uses `run`)
because of shell redirection that we need to set up.
The solution, implemented in this patch, is to use code like this:
```bash
ret=0
__runc ... || ret=$?
show_logs
[ $ret -eq 0 ]
```
In case __runc exits with non-zero exit code, `ret=$?` is executed, and
it always succeeds, so we won't fail just yet and have a chance to show
logs before checking the value of $ret.
In case __runc succeeds, `ret=$?` is never executed, so $ret will still
be zero (this is the reason why it needs to be set explicitly).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Do not use hardcoded fd numbers, instead relying on bash feature of
assigning an fd to a variable.
This looks very weird, but the rule of thumb here is:
- if this is in exec, use {var} (i.e. no $);
- otherwise, use as normal ($var or ${var}).
2. Add killing the background processes and closing the fds to teardown.
This is helpful in case of a test failure, in order to not affect the
subsequent tests.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
some hierarchies were created directly by .Apply() on top of systemd
managed cgroups. systemd doesn't manage these and as a result we leak
these cgroups.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This patch adds a test based on real world usage of runc hooks
(libnvidia-container). We verify that mounting a library inside
a container and running ldconfig succeeds.
Signed-off-by: Renaud Gaubert <rgaubert@nvidia.com>
1. When using `runc`, we should check `$status` and not `$?`.
2. Before exit code check, let's (try to) show errors from CRIU log.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
For some reason, runc systemd drivers (both v1 and v2) never set
systemd unit property named `CPUQuotaPeriod` (known as
`CPUQuotaPeriodUSec` on dbus and in `systemctl show` output).
Set it, and add a check to all the integration tests. The check is less
than trivial because, when not set, the value is shown as "infinity" but
when set to the same (default) value, shown as "100ms", so in case we
expect 100ms (period = 100000 us), we have to _also_ check for
"infinity".
[v2: add systemd version checks since CPUQuotaPeriod requires v242+]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The infinity value was changed in systemd 227.
systemd >= 227: "infinity"
systemd <= 226: 18446744073709551615
e.g. 03a7b521e3 (diff-423c8c1eeb2ef5b08849c3c30b7e53aeR558)
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Add four "corner case" tests that check that the CPU period/quota
can be set/updated even in case neither CPU quota nor CPU period
(were previously) set.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Also, enable tests of setting quota and period separately in case
systemd cgroup driver is used, as commit 32746fb334
("update: do not overwrite old cpu quota/period") made it possible
to do so.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Fix#2046
Previously, the test was failing with EINVAL during writing 500001 to `/sys/fs/cgroup/cpu,cpuacct/runc-cgroups-integration-test/test-cgroup/cpu.rt_runtime_us`, because `/sys/fs/cgroup/cpu,cpuacct/runc-cgroups-integration-test/cpu.rt_runtime_us` was initialized with 0.
The issue had not been caught in Ubuntu 18.04 CI because it doesn't support rt.
Tested on Ubuntu 20.04.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
In case swap cgroup control is not available, the "event oom" test gives
the following error:
> # not ok 30 events oom
> # (in test file tests/integration/events.bats, line 134)
> # `[ "$status" -eq 0 ]' failed
> # <....>
> # runc run -d --console-socket /tmp/console.sock test_busybox (status=1):
> # time="2020-05-29T02:10:20Z" level=warning msg="signal: killed"
> # time="2020-05-29T02:10:20Z" level=error msg="container_linux.go:353: starting container process caused: process_linux.go:437: container init caused: process_linux.go:403: setting cgroup config for procHooks process caused: failed to write \"33554432\" to \"/sys/fs/cgroup/memory/test_busybox/memory.memsw.limit_in_bytes\": open /sys/fs/cgroup/memory/test_busybox/memory.memsw.limit_in_bytes: permission denied"
When I try to run the test without setting the swap limit, the shell
process is still getting killed, but the test hangs. I am not sure what
the reason is, but realistically this test is hard to perform without
the swap limit, so let's require cgroup swap for it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
For v2, mem+swap is always present. For v1, check it once and set a
variable which is used below.
This also removes CGROUP_MEMORY for v2 case since it's no longer used.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The "unlimited" value is the same for memory and memory+swap,
so let's use SYSTEM_MEM for both.
In fact, it was already used in one place to check swap, probably due to
a typo.
This also fixes the following failure on a cgroup v1 system without
mem+swap control (Ubuntu 19.04):
> # not ok 78 update cgroup v1/v2 common limits
> # (in test file tests/integration/update.bats, line 72)
> # `SYSTEM_MEM_SWAP=$(cat "${CGROUP_MEMORY_BASE_PATH}/$MEM_SWAP")' failed
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. __runc does not set $status, so the check is misleading.
2. Add set +eux to the nest.sh script so we can error out early, and see
what is going on.
3. Doing "echo +io" > cgroup.controllers is giving an error on my
machine ("sh: write error: Operation not supported"). It is probably
fine to just enable pids controller.
4. Add status check for runc exec nest.sh
5. Remove the second check for cgroup.threads contents -- it was already
checked earlier (the output of nest.sh script).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This is a quick-n-dirty fix the regression introduced by commit
06d7c1d, which made it impossible to only set CpuQuota
(without the CpuPeriod). It partially reverts the above commit,
and adds a test case.
The proper fix will follow.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
... and mem+swap is not explicitly set otherwise.
This ensures compatibility with cgroupv1 controller which interprets
things this way.
With this fixed, we can finally enable swap tests for cgroupv2.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Kir Kolyshkin
Aleksa Sarai
Giuseppe Scrivano
Mrunal Patel
Alban Crequy
Akihiro Suda
Renaud Gaubert
lifubang
Aleksa Sarai
John Hwang