When joining an existing namespace, don't default to configuring a
loopback interface in that namespace.
Its creator should have done that, and we don't want to fail to create
the container when we don't have sufficient privileges to configure the
network namespace.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Starting with systemd 237, in preparation for cgroup v2, delegation is
only now available for scopes, not slices.
Update libcontainer code to detect whether delegation is available on
both and use that information when creating new slices.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
The channel was introduced in #1683 to work around a race condition.
However, the check for error in StartTransientUnit ignores the error for
an already existing unit, and in that case there will be no notification
from DBus (so waiting on the channel will make it hang.)
Later PR #1754 added a timeout, which worked around the issue, but we
can fix this correctly by only waiting on the channel when there is no
error. Fix the code to do so.
The timeout handling was kept, since there might be other cases where
this situation occurs (https://bugzilla.redhat.com/show_bug.cgi?id=1548358
mentions calling this code from inside a container, it's unclear whether
an existing container was in use or not, so not sure whether this would
have fixed that bug as well.)
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
There is no reason to set the container state to "running" as a
temporary value when exec'ing a process on a container in "created"
state. The problem doing this is that consumers of the libcontainer
library might use it by keeping pointers in memory. In this case,
the container state will indicate that the container is running, which
is wrong, and this will end up with a failure on the next action
because the check for the container state transition will complain.
Fixes#1767
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Previously if oomScoreAdj was not set in config.json we would implicitly
set oom_score_adj to 0. This is not allowed according to the spec:
> If oomScoreAdj is not set, the runtime MUST NOT change the value of
> oom_score_adj.
Change this so that we do not modify oom_score_adj if oomScoreAdj is not
present in the configuration. While this modifies our internal
configuration types, the on-disk format is still compatible.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
In some cases, /sys/fs/cgroups is mounted read-only. In rootless
containers we can consider this effectively identical to having cgroups
that we don't have write permission to -- because the user isn't
responsible for the read-only setup and cannot modify it. The rules are
identical to when /sys/fs/cgroups is not writable by the unprivileged
user.
An example of this is the default configuration of Docker, where cgroups
are mounted as read-only as a preventative security measure.
Reported-by: Vladimir Rutsky <rutsky@google.com>
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Currently if a confined container process tries to list these directories
AVC's are generated because they are labeled with external labels. Adding
the mountlabel will remove these AVC's.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently Manager accepts nil cgroups when calling Apply, but it will panic then trying to call Destroy with the same config.
Signed-off-by: Denys Smirnov <denys@sourced.tech>
The function is called even if the usernamespace is not set.
This results having wrong uid/gid set on devices.
This fix add a test to check if usernamespace is set befor calling
setupUserNamespace.
Fixes#1742
Signed-off-by: Julien Lavesque <julien.lavesque@gmail.com>
gocapability has supported 0 as "the current PID" since
syndtr/gocapability@5e7cce49 (Allow to use the zero value for pid to
operate with the current task, 2015-01-15, syndtr/gocapability#2).
libcontainer was ported to that approach in 444cc298 (namespaces:
allow to use pid namespace without mount namespace, 2015-01-27,
docker/libcontainer#358), but the change was clobbered by 22df5551
(Merge branch 'master' into api, 2015-02-19, docker/libcontainer#388)
which landed via 5b73860e (Merge pull request #388 from docker/api,
2015-02-19, docker/libcontainer#388). This commit restores the
changes from 444cc298.
Signed-off-by: W. Trevor King <wking@tremily.us>
The helper DRYs up the transition tests and makes it easy to get
complete coverage for invalid transitions.
I'm also using t.Run() for subtests. Run() is new in Go 1.7 [1], but
runc dropped support for 1.6 back in e773f96b (update go version at
travis-ci, 2017-02-20, #1335).
[1]: https://blog.golang.org/subtests
Signed-off-by: W. Trevor King <wking@tremily.us>
Technically, this change should not be necessary, as the kernel
documentation claims that if you call clone(flags|CLONE_NEWUSER), the
new user namespace will be the owner of all other namespaces created in
@flags. Unfortunately this isn't always the case, due to various
additional semantics and kernel bugs.
One particular instance is SELinux, which acts very strangely towards
the IPC namespace and mqueue. If you unshare the IPC namespace *before*
you map a user in the user namespace, the IPC namespace's internal
kern-mount for mqueue will be labelled incorrectly and the container
won't be able to access it. The only way of solving this is to unshare
IPC *after* the user has been mapped and we have changed to that user.
I've also heard of this happening to the NET namespace while talking to
some LXC folks, though I haven't personally seen that issue.
This change matches our handling of user namespaces to be the same as
how LXC handles these problems.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
When starting a container with `runc start` or `runc run`, the stub
process (runc[2:INIT]) opens a fifo for writing. Its parent runc process
will open the same fifo for reading. In this way, they synchronize.
If the stub process exits at the wrong time, the parent runc process
will block forever.
This can happen when racing 2 runc operations against each other: `runc
run/start`, and `runc delete`. It could also happen for other reasons,
e.g. the kernel's OOM killer may select the stub process.
This commit resolves this race by racing the opening of the exec fifo
from the runc parent process against the stub process exiting. If the
stub process exits before we open the fifo, we return an error.
Another solution is to wait on the stub process. However, it seems it
would require more refactoring to avoid calling wait multiple times on
the same process, which is an error.
Signed-off-by: Craig Furman <cfurman@pivotal.io>
Annotations weren't passed to hooks. This patch fixes that by passing
annotations to stdin for hooks.
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
libapparmor is integrated in libcontainer using cgo but is only used to
call a single function: aa_change_onexec. It turns out this function is
simple enough (writing a string to a file in /proc/<n>/attr/...) to be
re-implemented locally in libcontainer in plain Go.
This allows to drop the dependency on libapparmor and the corresponding
cgo integration.
Fixes#1674
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
When a subreaper is enabled, it might expect to reap a process and
retrieve its exit code. That's the reason why this patch is giving
the possibility to define the usage of a subreaper as a consumer of
libcontainer. Relying on this information, libcontainer will not
wait for signalled processes in case a subreaper has been set.
Fixes#1677
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
TestGetContainerStateAfterUpdate creates its state.json file on the current
directory which turns out to be the host runc directory. Thus whenever
the test completes it leaves the state.json file behind thus
a) poluting the local git repository
b) changing the host file system violating the principle of doing
everything in an isolated container environment
This change would create a new temporary (in-container) directory and use it as
linuxContainer.root
Signed-off-by: Tom Godkin <tgodkin@pivotal.io>
runc currently only support Linux platform, and since we dont intend to expose
the support to other platform, removing all other platforms placeholder code.
`libcontainer/configs` still being used in
https://github.com/moby/moby/blob/master/daemon/daemon_windows.go so
keeping it for now.
After this, we probably should also rename files to drop linux suffices
if possible.
Signed-off-by: Daniel Dao <dqminh89@gmail.com>
runc is not supported on FreeBSD, so remove all FreeBSD specific bits.
As suggested by @crosbymichael in #1653
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Selinux related code has been moved to the selinux package
(https://github.com/opencontainers/selinux) and therefore xattr related
code can be deleted from libcontainer
Signed-off-by: Danail Branekov <danailster@gmail.com>
When running runc tests with temp directory with size 500M copying
busybox without preserving hardlinks causes the folder to inflate to
roughly 330M. Copying busybox twice in certain tests causes the /tmp
directory to overfill. Using `-a` preserves links which busybox uses to
implement its choice of binary to run.
Signed-off-by: Tom Godkin <tgodkin@pivotal.io>
runc shouldn't depend on docker and be more self-contained.
Removing github.com/pkg/symlink dep is the first step to not depend on docker anymore
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Previously we would handle the "unmapped stdio" case by just doing a
simple check, however this didn't handle cases where the overflow_uid
was actually mapped in the user namespace. Instead of doing some
userspace checks, just try to do the fchown(2) and ignore EINVAL
(unmapped) or EPERM (lacking privilege over inode) errors.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Multiple conditions were previously allowed to be placed upon the
same syscall argument. Restore this behavior.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This fixes a GetStats() issue introduced in #1590:
If Intel RDT is enabled by hardware and kernel, but intelRdt is not
specified in original config, GetStats() will return error unexpectedly
because we haven't called Apply() to create intelrdt group or attach
tasks for this container. As a result, runc events command will have no
output.
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
The Major and Minor functions were added for Linux in golang/sys@85d1495
which is already vendored in. Use these functions instead of the local
re-implementation.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
This allows runc to be used as a target for docker's reexec module that
depends on a correct argv0 to select which process entrypoint to invoke.
Without this patch, when runc re-execs argv0 is set to "/proc/self/exe"
and the reexec module doesn't know what to do with it.
Signed-off-by: Petros Angelatos <petrosagg@gmail.com>
There are essentially two possible implementations for Setuid/Setgid on
Linux, either using SYS_SETUID32/SYS_SETGID32 or SYS_SETUID/SYS_SETGID,
depending on the architecture (see golang/go#1435 for why Setuid/Setgid
aren currently implemented for Linux neither in syscall nor in
golang.org/x/sys/unix).
Reduce duplication by merging the currently implemented variants and
adjusting the build tags accordingly.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
This commit ensures we write the expected freezer cgroup state after
every state check, in case the state check does not give the expected
result. This can happen when a new task is created and prevents the
whole cgroup to be FROZEN, leaving the state into FREEZING instead.
This patch prevents the case of an infinite loop to happen.
Fixes https://github.com/opencontainers/runc/issues/1609
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Both Process.Kill() and Process.Wait() can return errors that don't impact the correct behaviour of terminate.
Instead of letting these get returned and logged, which causes confusion, silently ignore them.
Currently the test needs to be a string test as the errors are private to the runtime packages, so its our only option.
This can be seen if init fails during the setns.
Signed-off-by: Steven Hartland <steven.hartland@multiplay.co.uk>
Due to the semantics of chroot(2) when it comes to mount namespaces, it
is not generally safe to use MS_PRIVATE as a mount propgation when using
chroot(2). The reason for this is that this effectively results in a set
of mount references being held by the chroot'd namespace which the
namespace cannot free. pivot_root(2) does not have this issue because
the @old_root can be unmounted by the process.
Ultimately, --no-pivot is not really necessary anymore as a commonly
used option since f8e6b5af5e ("rootfs: make pivot_root not use a
temporary directory") resolved the read-only issue. But if someone
really needs to use it, MS_PRIVATE is never a good idea.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Signed-off-by: Ed King <eking@pivotal.io>
Signed-off-by: Gabriel Rosenhouse <grosenhouse@pivotal.io>
Signed-off-by: Konstantinos Karampogias <konstantinos.karampogias@swisscom.com>
The benefit for doing this within runc is that it works well with
userns.
Actually, runc already does the same thing for mount points.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Will Martin <wmartin@pivotal.io>
Signed-off-by: Petar Petrov <pppepito86@gmail.com>
Signed-off-by: Ed King <eking@pivotal.io>
Signed-off-by: Roberto Jimenez Sanchez <jszroberto@gmail.com>
Signed-off-by: Thomas Godkin <tgodkin@pivotal.io>
The code in prepareRoot (e385f67a0e/libcontainer/rootfs_linux.go (L599-L605))
attempts to default the rootfs mount to `rslave`. However, since the spec
conversion has already defaulted it to `rprivate`, that code doesn't
actually ever do anything.
This changes the spec conversion code to accept "" and treat it as 0.
Implicitly, this makes rootfs propagation default to `rslave`, which is
a part of fixing the moby bug https://github.com/moby/moby/issues/34672
Alternate implementatoins include changing this defaulting to be
`rslave` and removing the defaulting code in prepareRoot, or skipping
the mapping entirely for "", but I think this change is the cleanest of
those options.
Signed-off-by: Euan Kemp <euan.kemp@coreos.com>
In current implementation:
Either Intel RDT is not enabled by hardware and kernel, or intelRdt is
not specified in original config, we don't init IntelRdtManager in the
container to handle intelrdt constraint. It is a tradeoff that Intel RDT
has hardware limitation to support only limited number of groups.
This patch makes a minor change to support update command:
Whether or not intelRdt is specified in config, we always init
IntelRdtManager in the container if Intel RDT is enabled. If intelRdt is
not specified in original config, we just don't Apply() to create
intelrdt group or attach tasks for this container.
In update command, we could re-enable through IntelRdtManager.Apply()
and then update intelrdt constraint.
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
This fix tries to address the warnings caused by static build
with go 1.9. As systemd needs dlopen/dlclose, the following warnings
will be generated for static build in go 1.9:
```
root@f4b077232050:/go/src/github.com/opencontainers/runc# make static
CGO_ENABLED=1 go build -tags "seccomp cgo static_build" -ldflags "-w -extldflags -static -X main.gitCommit="1c81e2a794c6e26a4c650142ae8893c47f619764" -X main.version=1.0.0-rc4+dev " -o runc .
/tmp/go-link-113476657/000007.o: In function `_cgo_a5acef59ed3f_Cfunc_dlopen':
/tmp/go-build/github.com/opencontainers/runc/vendor/github.com/coreos/pkg/dlopen/_obj/cgo-gcc-prolog:76: warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
```
This fix disables systemd when `static_build` flag is on (apply_nosystemd.go
is used instead).
This fix also fixes a small bug in `apply_nosystemd.go` for return value.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Now that rootless containers have support for multiple uid and gid
mappings, allow --user to work as expected. If the user is not mapped,
an error occurs (as usual).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
With the addition of our new{uid,gid}map support, we used to call
execvp(3) from inside nsexec. This would mean that the path resolution
for the binaries would happen in nsexec. Move the resolution to the
initial setup code, and pass the absolute path to nsexec.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
After quite a bit of debugging, I found that previous versions of this
patchset did not include newgidmap in a rootless setting. Fix this by
passing it whenever group mappings are applied, and also providing some
better checking for try_mapping_tool. This commit also includes some
stylistic improvements.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Take advantage of the newuidmap/newgidmap tools to allow multiple
users/groups to be mapped into the new user namespace in the rootless
case.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
[ rebased to handle intelrdt changes. ]
Signed-off-by: Aleksa Sarai <asarai@suse.de>
This is the follow-up PR of #1279 to fix remaining issues:
Use init() to avoid race condition in IsIntelRdtEnabled().
Add also rename some variables and functions.
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
This applies cgroups earlier for container creation before the init
process starts running and forking off any additional processes.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
With the help of userfaultfd CRIU supports lazy migration. Lazy
migration means that memory pages are only transferred from the
migration source to the migration destination on page fault.
This enables to reduce the downtime during process or container
migration to a minimum as the memory does not need to be transferred
during migration.
Lazy migration currently depends on userfaultfd being available on the
current Linux kernel and if the used CRIU version supports lazy
migration. Both dependencies can be checked by querying CRIU via RPC if
the lazy migration feature is available. Using feature checking instead
of version comparison enables runC to use CRIU features from the
criu-dev branch. This way the user can decide if lazy migration should
be available by choosing the right kernel and CRIU branch.
To use lazy migration the CRIU process during dump needs to dump
everything besides the memory pages and then it opens a network port
waiting for remote page fault requests:
# runc checkpoint httpd --lazy-pages --page-server 0.0.0.0:27 \
--status-fd /tmp/postcopy-pipe
In this example CRIU will hang/wait once it has opened the network port
and wait for network connection. As runC waits for CRIU to finish it
will also hang until the lazy migration has finished. To know when the
restore on the destination side can start the '--status-fd' parameter is
used:
#️ runc checkpoint --help | grep status
--status-fd value criu writes \0 to this FD once lazy-pages is ready
The parameter '--status-fd' is directly from CRIU and this way the
process outside of runC which controls the migration knows exactly when
to transfer the checkpoint (without memory pages) to the destination and
that the restore can be started.
On the destination side it is necessary to start CRIU in 'lazy-pages'
mode like this:
# criu lazy-pages --page-server --address 192.168.122.3 --port 27 \
-D checkpoint
and tell runC to do a lazy restore:
# runc restore -d --image-path checkpoint --work-path checkpoint \
--lazy-pages httpd
If both processes on the restore side have the same working directory
'criu lazy-pages' creates a unix domain socket where it waits for
requests from the actual restore. runC starts CRIU restore in lazy
restore mode and talks to 'criu lazy-pages' that it wants to restore
memory pages on demand. CRIU continues to restore the process and once
the process is running and accesses the first non-existing memory page
the 'criu lazy-pages' server will request the page from the source
system. Thus all pages from the source system will be transferred to the
destination system. Once all pages have been transferred runC on the
source system will end and the container will have finished migration.
This can also be combined with CRIU's pre-copy support. The combination
of pre-copy and post-copy (lazy migration) provides the possibility to
migrate containers with minimal downtimes.
Some additional background about post-copy migration can be found in
these articles:
https://lisas.de/~adrian/?p=1253https://lisas.de/~adrian/?p=1183
Signed-off-by: Adrian Reber <areber@redhat.com>
Before adding the actual lazy migration support, this adds the feature
check for lazy-pages. Right now lazy migration, which is based on
userfaultd is only available in the criu-dev branch and not yet in a
release. As the check does not dependent on a certain version but on
a CRIU feature which can be queried it can be part of runC without a new
version check depending on a feature from criu-dev.
Signed-off-by: Adrian Reber <areber@redhat.com>
About Intel RDT/CAT feature:
Intel platforms with new Xeon CPU support Intel Resource Director Technology
(RDT). Cache Allocation Technology (CAT) is a sub-feature of RDT, which
currently supports L3 cache resource allocation.
This feature provides a way for the software to restrict cache allocation to a
defined 'subset' of L3 cache which may be overlapping with other 'subsets'.
The different subsets are identified by class of service (CLOS) and each CLOS
has a capacity bitmask (CBM).
For more information about Intel RDT/CAT can be found in the section 17.17
of Intel Software Developer Manual.
About Intel RDT/CAT kernel interface:
In Linux 4.10 kernel or newer, the interface is defined and exposed via
"resource control" filesystem, which is a "cgroup-like" interface.
Comparing with cgroups, it has similar process management lifecycle and
interfaces in a container. But unlike cgroups' hierarchy, it has single level
filesystem layout.
Intel RDT "resource control" filesystem hierarchy:
mount -t resctrl resctrl /sys/fs/resctrl
tree /sys/fs/resctrl
/sys/fs/resctrl/
|-- info
| |-- L3
| |-- cbm_mask
| |-- min_cbm_bits
| |-- num_closids
|-- cpus
|-- schemata
|-- tasks
|-- <container_id>
|-- cpus
|-- schemata
|-- tasks
For runc, we can make use of `tasks` and `schemata` configuration for L3 cache
resource constraints.
The file `tasks` has a list of tasks that belongs to this group (e.g.,
<container_id>" group). Tasks can be added to a group by writing the task ID
to the "tasks" file (which will automatically remove them from the previous
group to which they belonged). New tasks created by fork(2) and clone(2) are
added to the same group as their parent. If a pid is not in any sub group, it
Is in root group.
The file `schemata` has allocation bitmasks/values for L3 cache on each socket,
which contains L3 cache id and capacity bitmask (CBM).
Format: "L3:<cache_id0>=<cbm0>;<cache_id1>=<cbm1>;..."
For example, on a two-socket machine, L3's schema line could be `L3:0=ff;1=c0`
which means L3 cache id 0's CBM is 0xff, and L3 cache id 1's CBM is 0xc0.
The valid L3 cache CBM is a *contiguous bits set* and number of bits that can
be set is less than the max bit. The max bits in the CBM is varied among
supported Intel Xeon platforms. In Intel RDT "resource control" filesystem
layout, the CBM in a group should be a subset of the CBM in root. Kernel will
check if it is valid when writing. e.g., 0xfffff in root indicates the max bits
of CBM is 20 bits, which mapping to entire L3 cache capacity. Some valid CBM
values to set in a group: 0xf, 0xf0, 0x3ff, 0x1f00 and etc.
For more information about Intel RDT/CAT kernel interface:
https://www.kernel.org/doc/Documentation/x86/intel_rdt_ui.txt
An example for runc:
Consider a two-socket machine with two L3 caches where the default CBM is
0xfffff and the max CBM length is 20 bits. With this configuration, tasks
inside the container only have access to the "upper" 80% of L3 cache id 0 and
the "lower" 50% L3 cache id 1:
"linux": {
"intelRdt": {
"l3CacheSchema": "L3:0=ffff0;1=3ff"
}
}
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
This mirrors the standard_init_linux.go seccomp code, which only applies
seccomp early if NoNewPrivileges is enabled. Otherwise it's done
immediately before execve to reduce the amount of syscalls necessary for
users to enable in their seccomp profiles.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Fixes: #1557
I'm not quite sure about the root cause, looks like
systemd still want them to be uint64.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
While we have significant protections in place against CVE-2016-9962, we
still were holding onto a file descriptor that referenced the host
filesystem. This meant that in certain scenarios it was still possible
for a semi-privileged container to gain access to the host filesystem
(if they had CAP_SYS_PTRACE).
Instead, open the FIFO itself using a O_PATH. This allows us to
reference the FIFO directly without providing the ability for
directory-level access. When opening the FIFO inside the init process,
open it through procfs to re-open the actual FIFO (this is currently the
only supported way to open such a file descriptor).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
The documentation here:
https://docs.docker.com/engine/security/userns-remap/#user-namespace-known-limitations
says that readonly containers can't be used with user namespaces do to some
kernel restriction. In fact, there is a special case in the kernel to be
able to do stuff like this, so let's use it.
This takes us from:
ubuntu@docker:~$ docker run -it --read-only ubuntu
docker: Error response from daemon: oci runtime error: container_linux.go:262: starting container process caused "process_linux.go:339: container init caused \"rootfs_linux.go:125: remounting \\\"/dev\\\" as readonly caused \\\"operation not permitted\\\"\"".
to:
ubuntu@docker:~$ docker-runc --version
runc version 1.0.0-rc4+dev
commit: ae2948042b08ad3d6d13cd09f40a50ffff4fc688-dirty
spec: 1.0.0
ubuntu@docker:~$ docker run -it --read-only ubuntu
root@181e2acb909a:/# touch foo
touch: cannot touch 'foo': Read-only file system
Signed-off-by: Tycho Andersen <tycho@docker.com>
congfig.Sysctl setting is duplicated.
when contianer is rootless and Linux is nil, runc will panic.
Signed-off-by: Ma Shimiao <mashimiao.fnst@cn.fujitsu.com>
state.json should be a reflection of the container's
realtime state, including resource configurations,
so we should update state.json after updating container
resources.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Fixes: #1228
It can be reproduced by applying this patch:
```diff
@@ -45,6 +46,7 @@ func registerMemoryEvent(cgDir string, evName string, arg string) (<-chan struct
go func() {
defer func() {
close(ch)
+ <-time.After(1 * time.Second)
eventfd.Close()
evFile.Close()
}()
```
We can close channel after fds were closed.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Linux is not always not nil.
If Linux is nil, panic will occur.
Signed-off-by: Ma Shimiao <mashimiao.fnst@cn.fujitsu.com>
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Before this change, some file type would be treated as char devices
(e.g. symlinks).
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
This allows the libcontainer to automatically clean up runc:[1:CHILD]
processes created as part of nsenter.
Signed-off-by: Alex Fang <littlelightlittlefire@gmail.com>
With this runC also uses RPC to ask CRIU for its version. CRIU supports
a VERSION RPC since CRIU 3.0 and using the RPC interface does not
require parsing the console output of CRIU (which could change anytime).
For older CRIU versions which do not yet have the VERSION RPC runC falls
back to its old CRIU output parsing mode.
Once CRIU 3.0 is the minimum version required for runC the old code can
be removed.
v2:
* adapt to changes in the previous patches based on the review
Signed-off-by: Adrian Reber <areber@redhat.com>
Update criurpc.proto for the upcoming VERSION RPC.
This includes lazy_pages for the upcoming lazy migration support.
Signed-off-by: Adrian Reber <areber@redhat.com>
To use the CRIU VERSION RPC the criuSwrk function is adapted to work
with CriuOpts set to 'nil' as CriuOpts is not required for the VERSION
RPC.
Also do not print c.criuVersion if it is '0' as the first RPC call will
always be the VERSION call and only after that the version will be
known.
Signed-off-by: Adrian Reber <areber@redhat.com>
If the version of criu has already been determined there is no need to
ask criu for the version again. Use the value from c.criuVersion.
v2:
* reduce unnecessary code movement in the patch series
* factor out the criu version parsing into a separate function
Signed-off-by: Adrian Reber <areber@redhat.com>
The checkCriuVersion function used a string to specify the minimum
version required. This is more comfortable for an external interface
but for an internal function this added unnecessary complexity. This
changes to version string like '1.5.2' to an integer like 10502. This is
already the format used internally in the function.
Signed-off-by: Adrian Reber <areber@redhat.com>
go's switch statement doesn't need an explicit break. Remove it where
that is the case and add a comment to indicate the purpose where the
removal would lead to an empty case.
Found with honnef.co/go/tools/cmd/staticcheck
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Handle err return value of fmt.Scanf, os.Pipe and unix.ParseUnixRights.
Found with honnef.co/go/tools/cmd/staticcheck
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
This moves all console code to use github.com/containerd/console library to
handle console I/O. Also move to use EpollConsole by default when user requests
a terminal so we can still cope when the other side temporarily goes away.
Signed-off-by: Daniel Dao <dqminh89@gmail.com>
Refactor DeviceFromPath in order to get rid of package syscall and
directly use the functions from x/sys/unix. This also allows to get rid
of the conversion from the OS-independent file mode values (from the os
package) to Linux specific values and instead let's us use the raw
file mode value directly.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Updated logrus to use v1 which includes a breaking name change Sirupsen -> sirupsen.
This includes a manual edit of the docker term package to also correct the name there too.
Signed-off-by: Steven Hartland <steven.hartland@multiplay.co.uk>
Use ParseSocketControlMessage and ParseUnixRights from
golang.org/x/sys/unix instead of their syscall equivalent.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
fix#1476
If containerA shares namespace, say ipc namespace, with containerB, then
its ipc namespace path would be the same as containerB and be stored in
`state.json`. Exec into containerA will just read the namespace paths
stored in this file and join these namespaces. So, if containerB has
already been stopped, `docker exec containerA` will fail.
To address this issue, we should always save own namespace paths no
matter if we share namespaces with other containers.
Signed-off-by: Yuanhong Peng <pengyuanhong@huawei.com>
It appears as though these semantics were not fully thought out when
implementing them for rootless containers. It is not necessary (and
could be potentially dangerous) to set the owner of /run/ctr/$id to be
the root inside the container (if user namespaces are being used).
Instead, just use the e{g,u}id of runc to determine the owner.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Use IoctlGetInt and IoctlGetTermios/IoctlSetTermios instead of manually
reimplementing them.
Because of unlockpt, the ioctl wrapper is still needed as it needs to
pass a pointer to a value, which is not supported by any ioctl function
in x/sys/unix yet.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Use unix.Prctl() instead of manually reimplementing it using
unix.RawSyscall. Also use unix.SECCOMP_MODE_FILTER instead of locally
defining it.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Using MS_PRIVATE meant that there was a race between the mount(2) and
the umount2(2) calls where runc inadvertently has a live reference to a
mountpoint that existed on the host (which the host cannot kill
implicitly through an unmount and peer sharing).
In particular, this means that if we have a devicemapper mountpoint and
the host is trying to delete the underlying device, the delete will fail
because it is "in use" during the race. While the race is _very_ small
(and libdm actually retries to avoid these sorts of cases) this appears
to manifest in various cases.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
replace #1492#1494fix#1422
Since https://github.com/opencontainers/runtime-spec/pull/876 the memory
specifications are now `int64`, as that better matches the visible interface where
`-1` is a valid value. Otherwise finding the correct value was difficult as it
was kernel dependent.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
Use unix.Eventfd() instead of calling manually reimplementing it using
the raw syscall. Also use the correct corresponding unix.EFD_CLOEXEC
flag instead of unix.FD_CLOEXEC (which can have a different value on
some architectures and thus might lead to unexpected behavior).
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
And Stat_t.PID and Stat_t.Name while we're at it. Then use the new
.State property in runType to distinguish between running and
zombie/dead processes, since kill(2) does not [1]. With this change
we no longer claim Running status for zombie/dead processes.
I've also removed the kill(2) call from runType. It was originally
added in 13841ef3 (new-api: return the Running state only if the init
process is alive, 2014-12-23), but we've been accessing
/proc/[pid]/stat since 14e95b2a (Make state detection precise,
2016-07-05, #930), and with the /stat access the kill(2) check is
redundant.
I also don't see much point to the previously-separate
doesInitProcessExist, so I've inlined that logic in runType.
It would be nice to distinguish between "/proc/[pid]/stat doesn't
exist" and errors parsing its contents, but I've skipped that for the
moment.
The Running -> Stopped change in checkpoint_test.go is because the
post-checkpoint process is a zombie, and with this commit zombie
processes are Stopped (and no longer Running).
[1]: https://github.com/opencontainers/runc/pull/1483#issuecomment-307527789
Signed-off-by: W. Trevor King <wking@tremily.us>
And convert the various start-time properties from strings to uint64s.
This removes all internal consumers of the deprecated
GetProcessStartTime function.
Signed-off-by: W. Trevor King <wking@tremily.us>
Use KeyctlJoinSessionKeyring, KeyctlString and KeyctlSetperm from
golang.org/x/sys/unix instead of manually reimplementing them.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
And use it only in local tooling that is forwarding the pseudoterminal
master. That way runC no longer has an opinion on the onlcr setting
for folks who are creating a terminal and detaching. They'll use
--console-socket and can setup the pseudoterminal however they like
without runC having an opinion. With this commit, the only cases
where runC still has applies SaneTerminal is when *it* is the process
consuming the master descriptor.
Signed-off-by: W. Trevor King <wking@tremily.us>
Use the NLA_ALIGNTO and NLA_HDRLEN constants from x/sys/unix instead of
syscall, as the syscall package shouldn't be used anymore (except for a
few exceptions).
This also makes the syscall_NLA_HDRLEN workaround for gccgo unnecessary.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Use the symlink xattr syscall wrappers Lgetxattr, Llistxattr and
Lsetxattr from x/sys/unix (introduced in
golang/sys@b90f89a1e7) instead of
providing own wrappers. Leave the functionality of system.Lgetxattr
intact with respect to the retry with a larger buffer, but switch it to
use unix.Lgetxattr.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Follow commit 3d7cb4293c ("Move libcontainer to x/sys/unix") and also
move the examples in README.md from syscall to x/sys/unix.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Since syscall is outdated and broken for some architectures,
use x/sys/unix instead.
There are still some dependencies on the syscall package that will
remain in syscall for the forseeable future:
Errno
Signal
SysProcAttr
Additionally:
- os still uses syscall, so it needs to be kept for anything
returning *os.ProcessState, such as process.Wait.
Signed-off-by: Christy Perez <christy@linux.vnet.ibm.com>
* User Case:
User could use prestart hook to add block devices to container. so the
hook should have a way to set the permissions of the devices.
Just move cgroup config operation before prestart hook will work.
Signed-off-by: Wentao Zhang <zhangwentao234@huawei.com>
FreeBSD does not support cgroups or namespaces, which the code suggested, and is not supported
in runc anyway right now. So clean up the file naming to use `_linux` where appropriate.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
A freezer cgroup allows to dump processes faster.
If a user wants to checkpoint a container and its storage,
he has to pause a container, but in this case we need to pass
a path to its freezer cgroup to "criu dump".
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Nalin Dahyabhai
Filipe Brandenburger
Sebastien Boeuf
Akihiro Suda
Tamal Saha
Aleksa Sarai
Daniel J Walsh
Qiang Huang
W. Trevor King
vikaschoudhary16
Denys Smirnov
Vincent Batts
Michael Crosby
ynirk
Allen Sun
ravisantoshgudimetla
Mrunal Patel
Ed King
Will Martin
Antonio Murdaca
Tobias Klauser
Allen Sun
Ma Shimiao
Danail Branekov
Daniel Dao
Seth Jennings
Vincent Demeester
Danail Branekov
Lorenzo Fontana
Matthew Heon
Xiaochen Shen
Petros Angelatos
Steven Hartland
Konstantinos Karampogias
Euan Kemp
s7v7nislands
Yong Tang
Giuseppe Scrivano
Adrian Reber
Tycho Andersen
Nikolas Sepos
Kenfe-Mickael Laventure
Alex Fang
yangshukui
Yuanhong Peng
Justin Cormack
Kang Liang
Vladimir Stefanovic
Christy Perez
Wentao Zhang
Valentin Rothberg
Harshal Patil
Andrei Vagin