c.cgroupManager.GetPaths() are called twice here: once in currentState()
and then in newSetnsProcess(). Reuse the result of the first call, which
is stored into state.CgroupPaths.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Instead of passing the whole map of paths, pass the path to the memory
controller which these functions actually require.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In cgroup v2, when memory and memorySwap set to the same value which is greater than zero,
runc should write zero in `memory.swap.max` to disable swap.
Signed-off-by: lifubang <lifubang@acmcoder.com>
The error message was including both the rootfs path, and the full
mount path, which also includes the path of the rootfs.
This patch removes the rootfs path from the error message, as it
was redundant, and made the error message overly verbose
Before this patch (errors wrapped for readability):
```
container_linux.go:348: starting container process caused: process_linux.go:438:
container init caused: rootfs_linux.go:58: mounting "/foo.txt"
to rootfs "/var/lib/docker/overlay2/de506d67da606b807009e23b548fec60d72359c77eec88785d8c7ecd54a6e4b2/merged"
at "/var/lib/docker/overlay2/de506d67da606b807009e23b548fec60d72359c77eec88785d8c7ecd54a6e4b2/merged/usr/share/nginx/html"
caused: not a directory: unknown
```
With this patch applied:
```
container_linux.go:348: starting container process caused: process_linux.go:438:
container init caused: rootfs_linux.go:58: mounting "/foo.txt"
to rootfs at "/var/lib/docker/overlay2/de506d67da606b807009e23b548fec60d72359c77eec88785d8c7ecd54a6e4b2/merged/usr/share/nginx/html"
caused: not a directory: unknown
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
genericError.Error() was formatting the underlying error using `%q`; as a
result, quotes in underlying errors were escaped multiple times, which
caused the output to become hard to read, for example (wrapped for readability):
```
container_linux.go:345: starting container process caused "process_linux.go:430:
container init caused \"rootfs_linux.go:58: mounting \\\"/foo.txt\\\"
to rootfs \\\"/var/lib/docker/overlay2/f49a0ae0ec6646c818dcf05dbcbbdd79fc7c42561f3684fbb1fc5d2b9d3ad192/merged\\\"
at \\\"/var/lib/docker/overlay2/f49a0ae0ec6646c818dcf05dbcbbdd79fc7c42561f3684fbb1fc5d2b9d3ad192/merged/usr/share/nginx/html\\\"
caused \\\"not a directory\\\"\"": unknown
```
With this patch applied:
```
container_linux.go:348: starting container process caused: process_linux.go:438:
container init caused: rootfs_linux.go:58: mounting "/foo.txt"
to rootfs "/var/lib/docker/overlay2/de506d67da606b807009e23b548fec60d72359c77eec88785d8c7ecd54a6e4b2/merged"
at "/var/lib/docker/overlay2/de506d67da606b807009e23b548fec60d72359c77eec88785d8c7ecd54a6e4b2/merged/usr/share/nginx/html"
caused: not a directory: unknown
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Function defaultPath always parses /proc/self/cgroup, but
the resulting value is not always used.
Avoid unnecessary reading/parsing by moving the code
to just before its use.
Modify the test case accordingly.
[v2: test: use UnifiedMountpoint, skip test if not on v2]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
To make a bind mount read-only, it needs to be remounted. This is what
the code removed does, but it is not needed here.
We have to deal with three cases here:
1. cgroup v2 unified mode. In this case the mount is real mount with
fstype=cgroup2, and there is no need to have a bind mount on top,
as we pass readonly flag to the mount as is.
2. cgroup v1 + cgroupns (enableCgroupns == true). In this case the
"mount" is in fact a set of real mounts with fstype=cgroup, and
they are all performed in mountCgroupV1, with readonly flag
added if needed.
3. cgroup v1 as is (enableCgroupns == false). In this case
mountCgroupV1() calls mountToRootfs() again with an argument
from the list obtained from getCgroupMounts(), i.e. a bind
mount with the same flags as the original mount has (plus
unix.MS_BIND | unix.MS_REC), and mountToRootfs() does remounting
(under the case "bind":).
So, the code which this patch is removing is not needed -- it
essentially does nothing in case 3 above (since the bind mount
is already remounted readonly), and in cases 1 and 2 it
creates an unneeded extra bind mount on top of a real one (or set of
real ones).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In case of cgroupv2 unified hierarchy, the /sys/fs/cgroup mount
is the real mount with fstype of cgroup2 (rather than a set of
external bind mounts like for cgroupv1).
So, we should not add it to the list of "external bind mounts"
on both checkpoint and restore.
Without this fix, checkpoint integration tests fail on cgroup v2.
Also, same is true for cgroup v1 + cgroupns.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. There is no need to try removing it recursively.
2. Do not treat ENOENT as an error (similar to fs
and systemd v1 drivers).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Instead of enabling all available controllers, figure out which
ones are required, and only enable those.
2. Amend all setFoo() functions to call isFooSet(). While this might
seem unnecessary, it might actually help to uncover a bug.
Imagine someone:
- adds a cgroup.Resources.CpuFoo setting;
- modifies setCpu() to apply the new setting;
- but forgets to amend isCpuSet() accordingly <-- BUG
In this case, a test case modifying CpuFoo will help
to uncover the BUG. This is the reason why it's added.
This patch *could be* amended by enabling controllers on a best-effort
basis, i.e. :
- do not return an error early if we can't enable some controllers;
- if we fail to enable all controllers at once (usually because one
of them can't be enabled), try enabling them one by one.
Currently this is not implemented, and it's not clear whether this
would be a good way to go or not.
[v2: add/use is${Controller}Set() functions]
[v3: document neededControllers()]
[v4: drop "best-effort" part]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Rename the files
- v1.go: cgroupv1 aka legacy;
- v2.go: cgroupv2 aka unified hierarchy;
- unsupported.go: when systemd is not available.
2. Move the code that is common between v1 and v2 to common.go
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This check was removed in commit 5406833a65. Now, when this
function is called from a few places, it is no longer obvious
that the path always starts with /sys/fs/cgroup/, so reinstate
the check just to be on the safe side.
This check also ensures that elements[3:] can be used safely.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
fs2 cgroup driver was not working because it did not enable controllers
while creating cgroup directory; instead it was merely doing MkdirAll()
and gathered the list of available controllers in NewManager().
Also, cgroup should be created in Apply(), not while creating a new
manager instance.
To fix:
1. Move the createCgroupsv2Path function from systemd driver to fs2 driver,
renaming it to CreateCgroupPath. Use in Apply() from both fs2 and
systemd drivers.
2. Delay available controllers map initialization to until it is needed.
With this patch:
- NewManager() only performs minimal initialization (initializin
m.dirPath, if not provided);
- Apply() properly creates cgroup path, enabling the controllers;
- m.controllers is initialized lazily on demand.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The fs2 cgroup driver has a sanity check for path.
Since systemd driver is relying on the same path,
it makes sense to move this check to the common code.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Having map of per-subsystem paths in systemd unified cgroups
driver does not make sense and makes the code less readable.
To get rid of it, move the systemd v1-or-v2 init code to
libcontainer/factory_linux.go which already has a function
to deduce unified path out of paths map.
End result is much cleaner code. Besides, we no longer write pid
to the same cgroup file 7 times in Apply() like we did before.
While at it
- add `rootless` flag which is passed on to fs2 manager
- merge getv2Path() into GetUnifiedPath(), don't overwrite
path if it is set during initialization (on Load).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In this very case, the code is writing to cgroup2 filesystem,
and the file name is well known and can't possibly be a symlink.
So, using securejoin is redundant.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In many places (not all of them though) we can use `unix.`
instead of `syscall.` as these are indentical.
In particular, x/sys/unix defines:
```go
type Signal = syscall.Signal
type Errno = syscall.Errno
type SysProcAttr = syscall.SysProcAttr
const ENODEV = syscall.Errno(0x13)
```
and unix.Exec() calls syscall.Exec().
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Kir Kolyshkin
Akihiro Suda
lifubang
Sebastiaan van Stijn
Mrunal Patel
Ted Yu
Kir Kolyshkin
Kenta Tada