The line we are parsing looks like this
> flags : fpu vme de pse <...>
so look for "flags" as a prefix, not substring.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The Err() method should be called after the Scan() loop, not inside it.
Found by
git grep -A3 -F '.Scan()' | grep Err
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This patch fixes a corner case when destroy a container:
If we start a container without 'intelRdt' config set, and then we run
“runc update --l3-cache-schema/--mem-bw-schema” to add 'intelRdt' config
implicitly.
Now if we enter "exit" from the container inside, we will pass through
linuxContainer.Destroy() -> state.destroy() -> intelRdtManager.Destroy().
But in IntelRdtManager.Destroy(), IntelRdtManager.Path is still null
string, it hasn’t been initialized yet. As a result, the created rdt
group directory during "runc update" will not be removed as expected.
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
MBA Software Controller feature is introduced in Linux kernel v4.18.
It is a software enhancement to mitigate some limitations in MBA which
describes in kernel documentation. It also makes the interface more user
friendly - we could specify memory bandwidth in "MBps" (Mega Bytes per
second) as well as in "percentages".
The kernel underneath would use a software feedback mechanism or a
"Software Controller" which reads the actual bandwidth using MBM
counters and adjust the memory bandwidth percentages to ensure:
"actual memory bandwidth < user specified memory bandwidth".
We could enable this feature through mount option "-o mba_MBps":
mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl
In runc, we handle both memory bandwidth schemata in unified format:
"MB:<cache_id0>=bandwidth0;<cache_id1>=bandwidth1;..."
The unit of memory bandwidth is specified in "percentages" by default,
and in "MBps" if MBA Software Controller is enabled.
For more information about Intel RDT and MBA Software Controller:
https://www.kernel.org/doc/Documentation/x86/intel_rdt_ui.txt
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Linux kernel v4.15 introduces better diagnostics for Intel RDT operation
errors. If any error returns when making new directories or writing to
any of the control file in resctrl filesystem, reading file
/sys/fs/resctrl/info/last_cmd_status could provide more information that
can be conveyed in the error returns from file operations.
Some examples:
echo "L3:0=f3;1=ff" > /sys/fs/resctrl/container_id/schemata
-bash: echo: write error: Invalid argument
cat /sys/fs/resctrl/info/last_cmd_status
mask f3 has non-consecutive 1-bits
echo "MB:0=0;1=110" > /sys/fs/resctrl/container_id/schemata
-bash: echo: write error: Invalid argument
cat /sys/fs/resctrl/info/last_cmd_status
MB value 0 out of range [10,100]
cd /sys/fs/resctrl
mkdir 1 2 3 4 5 6 7 8
mkdir: cannot create directory '8': No space left on device
cat /sys/fs/resctrl/info/last_cmd_status
out of CLOSIDs
See 'last_cmd_status' for more details in kernel documentation:
https://www.kernel.org/doc/Documentation/x86/intel_rdt_ui.txt
In runc, we could append the diagnostics information to the error
message of Intel RDT operation errors to provide more user-friendly
information.
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Double check if Intel RDT sub-features are available in "resource
control" filesystem. Intel RDT sub-features can be selectively disabled
or enabled by kernel command line (e.g., rdt=!l3cat,mba) in 4.14 and
newer kernel.
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Memory Bandwidth Allocation (MBA) is a resource allocation sub-feature
of Intel Resource Director Technology (RDT) which is supported on some
Intel Xeon platforms. Intel RDT/MBA provides indirect and approximate
throttle over memory bandwidth for the software. A user controls the
resource by indicating the percentage of maximum memory bandwidth.
Hardware details of Intel RDT/MBA can be found in section 17.18 of
Intel Software Developer Manual:
https://software.intel.com/en-us/articles/intel-sdm
In Linux 4.12 kernel and newer, Intel RDT/MBA is enabled by kernel
config CONFIG_INTEL_RDT. If hardware support, CPU flags `rdt_a` and
`mba` will be set in /proc/cpuinfo.
Intel RDT "resource control" filesystem hierarchy:
mount -t resctrl resctrl /sys/fs/resctrl
tree /sys/fs/resctrl
/sys/fs/resctrl/
|-- info
| |-- L3
| | |-- cbm_mask
| | |-- min_cbm_bits
| | |-- num_closids
| |-- MB
| |-- bandwidth_gran
| |-- delay_linear
| |-- min_bandwidth
| |-- num_closids
|-- ...
|-- schemata
|-- tasks
|-- <container_id>
|-- ...
|-- schemata
|-- tasks
For MBA support for `runc`, we will reuse the infrastructure and code
base of Intel RDT/CAT which implemented in #1279. We could also make
use of `tasks` and `schemata` configuration for memory bandwidth
resource constraints.
The file `tasks` has a list of tasks that belongs to this group (e.g.,
<container_id>" group). Tasks can be added to a group by writing the
task ID to the "tasks" file (which will automatically remove them from
the previous group to which they belonged). New tasks created by
fork(2) and clone(2) are added to the same group as their parent.
The file `schemata` has a list of all the resources available to this
group. Each resource (L3 cache, memory bandwidth) has its own line and
format.
Memory bandwidth schema:
It has allocation values for memory bandwidth on each socket, which
contains L3 cache id and memory bandwidth percentage.
Format: "MB:<cache_id0>=bandwidth0;<cache_id1>=bandwidth1;..."
The minimum bandwidth percentage value for each CPU model is predefined
and can be looked up through "info/MB/min_bandwidth". The bandwidth
granularity that is allocated is also dependent on the CPU model and
can be looked up at "info/MB/bandwidth_gran". The available bandwidth
control steps are: min_bw + N * bw_gran. Intermediate values are
rounded to the next control step available on the hardware.
For more information about Intel RDT kernel interface:
https://www.kernel.org/doc/Documentation/x86/intel_rdt_ui.txt
An example for runc:
Consider a two-socket machine with two L3 caches where the minimum
memory bandwidth of 10% with a memory bandwidth granularity of 10%.
Tasks inside the container may use a maximum memory bandwidth of 20%
on socket 0 and 70% on socket 1.
"linux": {
"intelRdt": {
"memBwSchema": "MB:0=20;1=70"
}
}
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
This fixes a GetStats() issue introduced in #1590:
If Intel RDT is enabled by hardware and kernel, but intelRdt is not
specified in original config, GetStats() will return error unexpectedly
because we haven't called Apply() to create intelrdt group or attach
tasks for this container. As a result, runc events command will have no
output.
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
In current implementation:
Either Intel RDT is not enabled by hardware and kernel, or intelRdt is
not specified in original config, we don't init IntelRdtManager in the
container to handle intelrdt constraint. It is a tradeoff that Intel RDT
has hardware limitation to support only limited number of groups.
This patch makes a minor change to support update command:
Whether or not intelRdt is specified in config, we always init
IntelRdtManager in the container if Intel RDT is enabled. If intelRdt is
not specified in original config, we just don't Apply() to create
intelrdt group or attach tasks for this container.
In update command, we could re-enable through IntelRdtManager.Apply()
and then update intelrdt constraint.
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
This is the follow-up PR of #1279 to fix remaining issues:
Use init() to avoid race condition in IsIntelRdtEnabled().
Add also rename some variables and functions.
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
About Intel RDT/CAT feature:
Intel platforms with new Xeon CPU support Intel Resource Director Technology
(RDT). Cache Allocation Technology (CAT) is a sub-feature of RDT, which
currently supports L3 cache resource allocation.
This feature provides a way for the software to restrict cache allocation to a
defined 'subset' of L3 cache which may be overlapping with other 'subsets'.
The different subsets are identified by class of service (CLOS) and each CLOS
has a capacity bitmask (CBM).
For more information about Intel RDT/CAT can be found in the section 17.17
of Intel Software Developer Manual.
About Intel RDT/CAT kernel interface:
In Linux 4.10 kernel or newer, the interface is defined and exposed via
"resource control" filesystem, which is a "cgroup-like" interface.
Comparing with cgroups, it has similar process management lifecycle and
interfaces in a container. But unlike cgroups' hierarchy, it has single level
filesystem layout.
Intel RDT "resource control" filesystem hierarchy:
mount -t resctrl resctrl /sys/fs/resctrl
tree /sys/fs/resctrl
/sys/fs/resctrl/
|-- info
| |-- L3
| |-- cbm_mask
| |-- min_cbm_bits
| |-- num_closids
|-- cpus
|-- schemata
|-- tasks
|-- <container_id>
|-- cpus
|-- schemata
|-- tasks
For runc, we can make use of `tasks` and `schemata` configuration for L3 cache
resource constraints.
The file `tasks` has a list of tasks that belongs to this group (e.g.,
<container_id>" group). Tasks can be added to a group by writing the task ID
to the "tasks" file (which will automatically remove them from the previous
group to which they belonged). New tasks created by fork(2) and clone(2) are
added to the same group as their parent. If a pid is not in any sub group, it
Is in root group.
The file `schemata` has allocation bitmasks/values for L3 cache on each socket,
which contains L3 cache id and capacity bitmask (CBM).
Format: "L3:<cache_id0>=<cbm0>;<cache_id1>=<cbm1>;..."
For example, on a two-socket machine, L3's schema line could be `L3:0=ff;1=c0`
which means L3 cache id 0's CBM is 0xff, and L3 cache id 1's CBM is 0xc0.
The valid L3 cache CBM is a *contiguous bits set* and number of bits that can
be set is less than the max bit. The max bits in the CBM is varied among
supported Intel Xeon platforms. In Intel RDT "resource control" filesystem
layout, the CBM in a group should be a subset of the CBM in root. Kernel will
check if it is valid when writing. e.g., 0xfffff in root indicates the max bits
of CBM is 20 bits, which mapping to entire L3 cache capacity. Some valid CBM
values to set in a group: 0xf, 0xf0, 0x3ff, 0x1f00 and etc.
For more information about Intel RDT/CAT kernel interface:
https://www.kernel.org/doc/Documentation/x86/intel_rdt_ui.txt
An example for runc:
Consider a two-socket machine with two L3 caches where the default CBM is
0xfffff and the max CBM length is 20 bits. With this configuration, tasks
inside the container only have access to the "upper" 80% of L3 cache id 0 and
the "lower" 50% L3 cache id 1:
"linux": {
"intelRdt": {
"l3CacheSchema": "L3:0=ffff0;1=3ff"
}
}
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Kir Kolyshkin
Xiaochen Shen
JoeWrightss
Yan Zhu