merging and refining examples, also refining skipping documentation.

doc/announce/index.txt

@@ -6,6 +6,10 @@ Release announcements
    :maxdepth: 2
 
    release-2.0.0
+
+.. toctree::
+   :hidden:
+
    release-1.3.4
    release-1.3.3
    release-1.3.2

doc/example/assertion/test_failures.py

@@ -1,6 +1,7 @@
 
 import py
 failure_demo = py.path.local(__file__).dirpath('failure_demo.py')
+pytest_plugins = 'pytester',
 
 def test_failure_demo_fails_properly(testdir):
     target = testdir.tmpdir.join(failure_demo.basename)

doc/example/builtin.txt

@@ -1,36 +0,0 @@
-
-writing well integrated assertion helpers
-========================================================
-
-If you have a test helper function called from a test you can
-use the ``pytest.fail`` marker to fail a test with a certain message.
-The test support function will not show up in the traceback if you
-set the ``__tracebackhide__`` option somewhere in the helper function.
-Example::
-
-    # content of test_checkconfig.py
-    import pytest
-    def checkconfig(x):
-        __tracebackhide__ = True
-        if not hasattr(x, "config"):
-            pytest.fail("not configured: %s" %(x,))
-
-    def test_something():
-        checkconfig(42)
-
-The ``__tracebackhide__`` setting influences py.test showing
-of tracebacks: the ``checkconfig`` function will not be shown
-unless the ``--fulltrace`` command line option is specified.
-Let's run our little function::
-
-    $ py.test -q
-    F
-    ================================= FAILURES =================================
-    ______________________________ test_something ______________________________
-    
-        def test_something():
-    >       checkconfig(42)
-    E       Failed: not configured: 42
-    
-    test_checkconfig.py:8: Failed
-    1 failed in 0.02 seconds

doc/example/controlskip.txt

@@ -1,57 +0,0 @@
-
-.. _`retrieved by hooks as item keywords`:
-
-control skipping of tests according to command line option
---------------------------------------------------------------
-
-Here is a ``conftest.py`` file adding a ``--runslow`` command
-line option to control skipping of ``slow`` marked tests::
-
-    # content of conftest.py
-
-    import pytest
-    def pytest_addoption(parser):
-        parser.addoption("--runslow", action="store_true",
-            help="run slow tests")
-
-    def pytest_runtest_setup(item):
-        if 'slow' in item.keywords and not item.config.getvalue("runslow"):
-            pytest.skip("need --runslow option to run")
-
-We can now write a test module like this::
-
-    # content of test_module.py
-
-    import pytest
-    slow = pytest.mark.slow
-
-    def test_func_fast():
-        pass
-
-    @slow
-    def test_func_slow():
-        pass
-
-and when running it will see a skipped "slow" test::
-
-    $ py.test test_module.py -rs    # "-rs" means report details on the little 's'
-    =========================== test session starts ============================
-    platform linux2 -- Python 2.6.5 -- pytest-2.0.0.dev30
-    test path 1: test_module.py
-    
-    test_module.py .s
-    ========================= short test summary info ==========================
-    SKIP [1] /tmp/doc-exec-104/conftest.py:9: need --runslow option to run
-    
-    =================== 1 passed, 1 skipped in 0.02 seconds ====================
-
-Or run it including the ``slow`` marked test::
-
-    $ py.test test_module.py --runslow
-    =========================== test session starts ============================
-    platform linux2 -- Python 2.6.5 -- pytest-2.0.0.dev30
-    test path 1: test_module.py
-    
-    test_module.py ..
-    
-    ========================= 2 passed in 0.01 seconds =========================

doc/example/costlysetup/conftest.py

@@ -9,6 +9,7 @@ def pytest_funcarg__setup(request):
 class CostlySetup:
     def __init__(self):
         import time
+        print ("performing costly setup")
         time.sleep(5)
         self.timecostly = 1
 

doc/example/costlysetup/sub1/test_quick.py

@@ -0,0 +1,3 @@
+
+def test_quick(setup):
+    pass

doc/example/detectpytest.txt

@@ -1,29 +0,0 @@
-
-Detect if running from within a py.test run
---------------------------------------------------------------
-
-Usually it is a bad idea to make application code
-behave differently if called from a test.  But if you
-absolutely must find out if your application code is
-running from a test you can do something like this::
-
-    # content of conftest.py in your testing directory
-
-    def pytest_configure(config):
-        import sys   
-        sys._called_from_test = True
-
-    def pytest_unconfigure(config):
-        del sys._called_from_test
-
-and then check for the ``sys._called_from_test`` flag::
-
-    if hasattr(sys, '_called_from_test'):
-        # called from within a test run
-    else:
-        # called "normally"
-    
-accordingly in your application.  It's also a good idea
-to rather use your own application module rather than ``sys``
-for handling flag.
-

doc/example/index.txt

@@ -10,11 +10,8 @@ need more examples or have questions.
 .. toctree::
    :maxdepth: 2
 
-   builtin.txt
-   pythoncollection.txt
-   controlskip.txt
-   mysetup.txt
-   detectpytest.txt
-   nonpython.txt
    simple.txt
-   xunit_setup.txt
+   pythoncollection.txt
+   mysetup.txt
+   parametrize.txt
+   nonpython.txt

doc/example/multipython.py

@@ -1,12 +1,10 @@
 """
-
 module containing a parametrized tests testing cross-python
 serialization via the pickle module.
 """
 import py
 
-pythonlist = ['python2.3', 'python2.4', 'python2.5', 'python2.6']
+pythonlist = ['python2.4', 'python2.5', 'python2.6', 'python2.7', 'python2.8']
-# 'jython' 'python3.1']
 
 def pytest_generate_tests(metafunc):
     if 'python1' in metafunc.funcargnames:

doc/example/parametrize.txt

@@ -0,0 +1,142 @@
+
+parametrizing tests
+=================================================
+
+py.test allows to easily implement your own custom
+parametrization scheme for tests.  Here we provide
+some examples for inspiration and re-use.
+
+Parametrizing test methods through per-class configuration
+--------------------------------------------------------------
+
+.. _`unittest parameterizer`: http://code.google.com/p/unittest-ext/source/browse/trunk/params.py
+
+Here is an example ``pytest_generate_function`` function implementing a
+parametrization scheme similar to Michael Foords `unittest
+parameterizer`_ in a lot less code::
+
+    # content of ./test_parametrize.py
+    import pytest
+
+    def pytest_generate_tests(metafunc):
+        # called once per each test function
+        for funcargs in metafunc.cls.params[metafunc.function.__name__]:
+            # schedule a new test function run with applied **funcargs
+            metafunc.addcall(funcargs=funcargs)
+
+    class TestClass:
+        # a map specifying multiple argument sets for a test method
+        params = {
+            'test_equals': [dict(a=1, b=2), dict(a=3, b=3), ],
+            'test_zerodivision': [dict(a=1, b=0), dict(a=3, b=2)],
+        }
+
+        def test_equals(self, a, b):
+            assert a == b
+
+        def test_zerodivision(self, a, b):
+            pytest.raises(ZeroDivisionError, "a/b")
+
+Running it means we are two tests for each test functions, using
+the respective settings::
+
+    $ py.test -q
+    F..F
+    ================================= FAILURES =================================
+    _________________________ TestClass.test_equals[0] _________________________
+    
+    self = <test_parametrize.TestClass instance at 0x128a638>, a = 1, b = 2
+    
+        def test_equals(self, a, b):
+    >       assert a == b
+    E       assert 1 == 2
+    
+    test_parametrize.py:17: AssertionError
+    ______________________ TestClass.test_zerodivision[1] ______________________
+    
+    self = <test_parametrize.TestClass instance at 0x1296440>, a = 3, b = 2
+    
+        def test_zerodivision(self, a, b):
+    >       pytest.raises(ZeroDivisionError, "a/b")
+    E       Failed: DID NOT RAISE
+    
+    test_parametrize.py:20: Failed
+    2 failed, 2 passed in 0.03 seconds
+
+Parametrizing test methods through a decorator
+--------------------------------------------------------------
+
+Modifying the previous example we can also allow decorators
+for parametrizing test methods::
+
+    # content of test_parametrize2.py
+
+    import pytest
+
+    # test support code
+    def params(funcarglist):
+        def wrapper(function):
+            function.funcarglist = funcarglist
+            return function
+        return wrapper
+
+    def pytest_generate_tests(metafunc):
+        for funcargs in getattr(metafunc.function, 'funcarglist', ()):
+            metafunc.addcall(funcargs=funcargs)
+
+    # actual test code
+    class TestClass:
+        @params([dict(a=1, b=2), dict(a=3, b=3), ])
+        def test_equals(self, a, b):
+            assert a == b
+
+        @params([dict(a=1, b=0), dict(a=3, b=2)])
+        def test_zerodivision(self, a, b):
+            pytest.raises(ZeroDivisionError, "a/b")
+
+Running it gives similar results as before::
+
+    $ py.test -q test_parametrize2.py
+    F..F
+    ================================= FAILURES =================================
+    _________________________ TestClass.test_equals[0] _________________________
+    
+    self = <test_parametrize2.TestClass instance at 0x1dbcc68>, a = 1, b = 2
+    
+        @params([dict(a=1, b=2), dict(a=3, b=3), ])
+        def test_equals(self, a, b):
+    >       assert a == b
+    E       assert 1 == 2
+    
+    test_parametrize2.py:19: AssertionError
+    ______________________ TestClass.test_zerodivision[1] ______________________
+    
+    self = <test_parametrize2.TestClass instance at 0x1dd0488>, a = 3, b = 2
+    
+        @params([dict(a=1, b=0), dict(a=3, b=2)])
+        def test_zerodivision(self, a, b):
+    >       pytest.raises(ZeroDivisionError, "a/b")
+    E       Failed: DID NOT RAISE
+    
+    test_parametrize2.py:23: Failed
+    2 failed, 2 passed in 0.03 seconds
+
+checking serialization between Python interpreters
+--------------------------------------------------------------
+
+Here is a stripped down real-life example of using parametrized
+testing for testing serialization betwee different interpreters.
+We define a ``test_basic_objects`` function which is to be run
+with different sets of arguments for its three arguments::
+
+* ``python1``: first python interpreter
+* ``python2``: second python interpreter
+* ``obj``: object to be dumped from first interpreter and loaded into second interpreter
+
+.. literalinclude:: multipython.py
+
+Running it (with Python-2.4 through to Python2.7 installed)::
+
+   . $ py.test -q multipython.py
+   ....s....s....s....ssssss....s....s....s....ssssss....s....s....s....ssssss
+   48 passed, 27 skipped in 2.55 seconds

doc/example/pythoncollection.txt

@@ -21,7 +21,7 @@ their file system path and then running the test. Through
 an ini-file and the :confval:`addopts` option you can make
 this change more permanently::
 
-    # content of setup.cfg or tox.ini
+    # content of pytest.ini
     [pytest]
     addopts = --pyargs
 
@@ -30,8 +30,8 @@ finding out what is collected
 
 You can always peek at the collection tree without running tests like this::
 
-    . $ py.test --collectonly collectonly.py
+    . $ py.test --collectonly pythoncollection.py
-    <Module 'collectonly.py'>
+    <Module 'pythoncollection.py'>
       <Function 'test_function'>
       <Class 'TestClass'>
         <Instance '()'>

doc/example/simple.txt

@@ -1,9 +1,26 @@
 
 .. highlightlang:: python
 
-simple patterns using hooks
+simple hook using patterns
 ==========================================================
 
+adding custom options
+----------------------
+
+py.test supports adding of standard optparse_ Options.
+A plugin may implement the ``addoption`` hook for registering
+custom options::
+
+    def pytest_addoption(parser):
+        parser.addoption("-M", "--myopt", action="store",
+            help="specify string to set myopt")
+
+    def pytest_configure(config):
+        if config.option.myopt:
+            # do action based on option value
+
+.. _optparse: http://docs.python.org/library/optparse.html
+
 pass different values to a test function, depending on command line options
 ----------------------------------------------------------------------------
 
@@ -134,3 +151,128 @@ let's run the full monty::
 
 As expected when running the full range of ``param1`` values
 we'll get an error on the last one.
+
+
+.. _`retrieved by hooks as item keywords`:
+
+control skipping of tests according to command line option
+--------------------------------------------------------------
+
+Here is a ``conftest.py`` file adding a ``--runslow`` command
+line option to control skipping of ``slow`` marked tests::
+
+    # content of conftest.py
+
+    import pytest
+    def pytest_addoption(parser):
+        parser.addoption("--runslow", action="store_true",
+            help="run slow tests")
+
+    def pytest_runtest_setup(item):
+        if 'slow' in item.keywords and not item.config.getvalue("runslow"):
+            pytest.skip("need --runslow option to run")
+
+We can now write a test module like this::
+
+    # content of test_module.py
+
+    import pytest
+    slow = pytest.mark.slow
+
+    def test_func_fast():
+        pass
+
+    @slow
+    def test_func_slow():
+        pass
+
+and when running it will see a skipped "slow" test::
+
+    $ py.test test_module.py -rs    # "-rs" means report details on the little 's'
+    =========================== test session starts ============================
+    platform linux2 -- Python 2.6.5 -- pytest-2.0.0.dev30
+    test path 1: test_module.py
+    
+    test_module.py .s
+    ========================= short test summary info ==========================
+    SKIP [1] /tmp/doc-exec-104/conftest.py:9: need --runslow option to run
+    
+    =================== 1 passed, 1 skipped in 0.02 seconds ====================
+
+Or run it including the ``slow`` marked test::
+
+    $ py.test test_module.py --runslow
+    =========================== test session starts ============================
+    platform linux2 -- Python 2.6.5 -- pytest-2.0.0.dev30
+    test path 1: test_module.py
+    
+    test_module.py ..
+    
+    ========================= 2 passed in 0.01 seconds =========================
+
+
+writing well integrated assertion helpers
+--------------------------------------------------
+
+If you have a test helper function called from a test you can
+use the ``pytest.fail`` marker to fail a test with a certain message.
+The test support function will not show up in the traceback if you
+set the ``__tracebackhide__`` option somewhere in the helper function.
+Example::
+
+    # content of test_checkconfig.py
+    import pytest
+    def checkconfig(x):
+        __tracebackhide__ = True
+        if not hasattr(x, "config"):
+            pytest.fail("not configured: %s" %(x,))
+
+    def test_something():
+        checkconfig(42)
+
+The ``__tracebackhide__`` setting influences py.test showing
+of tracebacks: the ``checkconfig`` function will not be shown
+unless the ``--fulltrace`` command line option is specified.
+Let's run our little function::
+
+    $ py.test -q
+    F
+    ================================= FAILURES =================================
+    ______________________________ test_something ______________________________
+    
+        def test_something():
+    >       checkconfig(42)
+    E       Failed: not configured: 42
+    
+    test_checkconfig.py:8: Failed
+    1 failed in 0.02 seconds
+
+
+Detect if running from within a py.test run
+--------------------------------------------------------------
+
+Usually it is a bad idea to make application code
+behave differently if called from a test.  But if you
+absolutely must find out if your application code is
+running from a test you can do something like this::
+
+    # content of conftest.py in your testing directory
+
+    def pytest_configure(config):
+        import sys
+        sys._called_from_test = True
+
+    def pytest_unconfigure(config):
+        del sys._called_from_test
+
+and then check for the ``sys._called_from_test`` flag::
+
+    if hasattr(sys, '_called_from_test'):
+        # called from within a test run
+    else:
+        # called "normally"
+    
+accordingly in your application.  It's also a good idea
+to rather use your own application module rather than ``sys``
+for handling flag.
+

doc/example/xfail_demo.py

@@ -0,0 +1,21 @@
+import pytest
+xfail = pytest.mark.xfail
+
+@xfail
+def test_hello():
+    assert 0
+
+@xfail(run=False)
+def test_hello2():
+    assert 0
+
+@xfail("hasattr(os, 'sep')")
+def test_hello3():
+    assert 0
+
+@xfail(reason="bug 110")
+def test_hello4():
+    assert 0
+
+def test_hello5():
+    pytest.xfail("reason")

doc/example/xunit_setup.txt

@@ -1,74 +0,0 @@
-Learning by examples
-=====================
-
-adding custom options
-----------------------
-
-py.test supports adding of standard optparse_ Options.
-A plugin may implement the ``addoption`` hook for registering
-custom options::
-
-    def pytest_addoption(parser):
-        parser.addoption("-M", "--myopt", action="store",
-            help="specify string to set myopt")
-
-    def pytest_configure(config):
-        if config.option.myopt:
-            # do action based on option value
-            #
-
-.. _optparse: http://docs.python.org/library/optparse.html
-
-order of setup/teardown module/class/item methods
-====================================================
-
-managing state at module, class and method level
-------------------------------------------------------------
-
-Here is a working example for what goes on when you setup modules,
-classes and methods::
-
-    # [[from py/documentation/example/pytest/test_setup_flow_example.py]]
-
-    def setup_module(module):
-        module.TestStateFullThing.classcount = 0
-
-    class TestStateFullThing:
-        def setup_class(cls):
-            cls.classcount += 1
-
-        def teardown_class(cls):
-            cls.classcount -= 1
-
-        def setup_method(self, method):
-            self.id = eval(method.func_name[5:])
-
-        def test_42(self):
-            assert self.classcount == 1
-            assert self.id == 42
-
-        def test_23(self):
-            assert self.classcount == 1
-            assert self.id == 23
-
-    def teardown_module(module):
-        assert module.TestStateFullThing.classcount == 0
-
-For this example the control flow happens as follows::
-
-    import test_setup_flow_example
-    setup_module(test_setup_flow_example)
-       setup_class(TestStateFullThing)
-           instance = TestStateFullThing()
-           setup_method(instance, instance.test_42)
-              instance.test_42()
-           setup_method(instance, instance.test_23)
-              instance.test_23()
-       teardown_class(TestStateFullThing)
-    teardown_module(test_setup_flow_example)
-
-Note that ``setup_class(TestStateFullThing)`` is called and not
-``TestStateFullThing.setup_class()`` which would require you
-to insert ``setup_class = classmethod(setup_class)`` to make
-your setup function callable. Did we mention that lazyness
-is a virtue?

doc/plugins.txt

@@ -65,7 +65,7 @@ tool, for example::
 
 If a plugin is installed,  py.test automatically finds and integrates it,
 there is no need to activate it.  If you don't need a plugin anymore simply
-de-install it.  You can find a list of valid plugins through a
+de-install it.  You can find a list of available plugins through a
 `pytest- pypi.python.org search`_.
 
 .. _`available installable plugins`:

doc/pytest.ini

@@ -0,0 +1,2 @@
+[pytest]
+# just defined to prevent the root level tox.ini to kick in

doc/skipping.txt

@@ -2,18 +2,19 @@
 skip and xfail mechanisms
 =====================================================================
 
-You can mark test functions for a conditional *skip* or as *xfail*,
+You can skip or "xfail" test functions, either by marking functions
-expected-to-fail.  Skipping a test avoids running a test.
+through a decorator or by calling the ``pytest.skip|xfail`` helpers.
-Whereas an xfail-marked test usually is run but if it fails it is
+A *skip* means that you expect your test to pass unless a certain configuration or condition (e.g. wrong Python interpreter, missing dependency) prevents it to run.  And *xfail* means that you expect your test to fail because there is an
-not reported in detail and counted separately. The latter allows
+implementation problem.  Counting and listing *xfailing* tests separately
-to keep track of real implementation problems whereas test skips
+helps to maintain a list of implementation problems and you can provide
-are normally tied to a condition, such as a platform or dependency
+info such as a bug number or a URL to provide a human readable problem context.
-requirement without which considering or running the test does
-not make sense.  If a test fails under all conditions then it's
-probably best to mark your test as 'xfail'.
 
-By running ``py.test -rxs`` you will see extra reporting
+Usually detailed information about skipped/xfailed tests is not shown
-information on skips and xfail-run tests at the end of a test run.
+to avoid cluttering the output.  You can use the ``-r`` option to
+see details corresponding to the "short" letters shown in the
+test progress::
+
+    py.test -rxs  # show extra info on skips and xfail tests
 
 .. _skipif:
 
@@ -47,7 +48,7 @@ at module level like this::
         ...
 
 
-skip groups of test functions
+skip test functions of a class
 --------------------------------------
 
 As with all function :ref:`marking` you can do it at
@@ -58,8 +59,7 @@ for skipping all methods of a test class based on platform::
         pytestmark = pytest.mark.skipif("sys.platform == 'win32'")
 
         def test_function(self):
-            # will not be setup or run under 'win32' platform
+            "will not be setup or run under 'win32' platform"
-            #
 
 The ``pytestmark`` decorator will be applied to each test function.
 If your code targets python2.6 or above you can equivalently use
@@ -69,8 +69,7 @@ the skipif decorator on classes::
     class TestPosixCalls:
 
         def test_function(self):
-            # will not be setup or run under 'win32' platform
+            "will not be setup or run under 'win32' platform"
-            #
 
 It is fine in general to apply multiple "skipif" decorators
 on a single function - this means that if any of the conditions
@@ -94,6 +93,13 @@ This test will be run but no traceback will be reported
 when it fails. Instead terminal reporting will list it in the
 "expected to fail" or "unexpectedly passing" sections.
 
+By specifying on the commandline::
+
+    pytest --runxfail
+
+you can force the running and reporting of an ``xfail`` marked test
+as if it weren't marked at all.
+
 Same as with skipif_ you can also selectively expect a failure
 depending on platform::
 
@@ -101,19 +107,32 @@ depending on platform::
     def test_function():
         ...
 
-To not run a test and still regard it as "xfailed"::
+You can also avoid running an "xfail" test at all or
+specify a reason such as a bug ID or similar.  Here is
+a simple test file with usages:
 
-    @pytest.mark.xfail(..., run=False)
+.. literalinclude:: example/xfail_demo.py
 
-To specify an explicit reason to be shown with xfailure detail::
+Running it with the report-on-xfail option gives this output::
 
-    @pytest.mark.xfail(..., reason="my reason")
+    example $ py.test -rx xfail_demo.py
+    =========================== test session starts ============================
+    platform linux2 -- Python 2.6.5 -- pytest-2.0.0.dev31
+    test path 1: xfail_demo.py
     
-By specifying on the commandline::
+    xfail_demo.py xxxxx
+    ========================= short test summary info ==========================
+    XFAIL xfail_demo.py::test_hello
+    XFAIL xfail_demo.py::test_hello2
+      reason: [NOTRUN]
+    XFAIL xfail_demo.py::test_hello3
+      condition: hasattr(os, 'sep')
+    XFAIL xfail_demo.py::test_hello4
+      bug 110
+    XFAIL xfail_demo.py::test_hello5
+      reason: reason
     
-    pytest --runxfail
+    ======================== 5 xfailed in 0.04 seconds =========================
-
-you can force the running and reporting of a runnable ``xfail`` marked test.
 
 imperative xfail from within a test or setup function
 ------------------------------------------------------

example/funcarg/conftest.py

@@ -1,3 +0,0 @@
-import py
-
-collect_ignore = 'mysetup', 'mysetup2', 'test_simpleprovider.py', 'parametrize'

example/funcarg/costlysetup/sub1/test_quick.py

@@ -1,3 +0,0 @@
-
-def test_quick():
-    pass

example/funcarg/mysetup/__init__.py

@@ -1 +0,0 @@
-# XXX this file should not need to be here but is here for proper sys.path mangling

example/funcarg/mysetup/conftest.py

@@ -1,9 +0,0 @@
-
-from mysetup.myapp import MyApp
-
-def pytest_funcarg__mysetup(request):
-    return MySetup()
-
-class MySetup:
-    def myapp(self):
-        return MyApp()

example/funcarg/mysetup/myapp.py

@@ -1,5 +0,0 @@
-
-class MyApp:
-    def question(self):
-        return 6 * 9
-

example/funcarg/mysetup/test_sample.py

@@ -1,5 +0,0 @@
-
-def test_answer(mysetup):
-    app = mysetup.myapp()
-    answer = app.question()
-    assert answer == 42

example/funcarg/mysetup2/__init__.py

@@ -1 +0,0 @@
-# XXX this file should not need to be here but is here for proper sys.path mangling

example/funcarg/mysetup2/conftest.py

@@ -1,24 +0,0 @@
-import py
-from mysetup2.myapp import MyApp
-
-def pytest_funcarg__mysetup(request):
-    return MySetup(request)
-
-def pytest_addoption(parser):
-    parser.addoption("--ssh", action="store", default=None,
-        help="specify ssh host to run tests with")
-
-
-class MySetup:
-    def __init__(self, request):
-        self.config = request.config
-
-    def myapp(self):
-        return MyApp()
-
-    def getsshconnection(self):
-        host = self.config.option.ssh
-        if host is None:
-            py.test.skip("specify ssh host with --ssh")
-        return execnet.SshGateway(host)
-

example/funcarg/mysetup2/myapp.py

@@ -1,5 +0,0 @@
-
-class MyApp:
-    def question(self):
-        return 6 * 9
-

example/funcarg/mysetup2/test_sample.py

@@ -1,6 +0,0 @@
-
-def test_answer(mysetup):
-    app = mysetup.myapp()
-    answer = app.question()
-    assert answer == 42
-

example/funcarg/mysetup2/test_ssh.py

@@ -1,5 +0,0 @@
-
-class TestClass:
-    def test_function(self, mysetup):
-        conn = mysetup.getsshconnection()
-        # work with conn

example/funcarg/parametrize/test_parametrize.py

@@ -1,17 +0,0 @@
-import py
-
-def pytest_generate_tests(metafunc):
-    for funcargs in metafunc.cls.params[metafunc.function.__name__]:
-        metafunc.addcall(funcargs=funcargs)
-
-class TestClass:
-    params = {
-        'test_equals': [dict(a=1, b=2), dict(a=3, b=3), dict(a=5, b=4)],
-        'test_zerodivision': [dict(a=1, b=0), dict(a=3, b=2)],
-    }
-
-    def test_equals(self, a, b):
-        assert a == b
-
-    def test_zerodivision(self, a, b):
-        py.test.raises(ZeroDivisionError, "a/b")

example/funcarg/parametrize/test_parametrize2.py

@@ -1,25 +0,0 @@
-import py
-
-# test support code
-def params(funcarglist):
-    def wrapper(function):
-        function.funcarglist = funcarglist
-        return function
-    return wrapper
-
-def pytest_generate_tests(metafunc):
-    for funcargs in getattr(metafunc.function, 'funcarglist', ()):
-        metafunc.addcall(funcargs=funcargs)
-
-
-# actual test code
-
-class TestClass:
-    @params([dict(a=1, b=2), dict(a=3, b=3), dict(a=5, b=4)], )
-    def test_equals(self, a, b):
-        assert a == b
-
-    @params([dict(a=1, b=0), dict(a=3, b=2)])
-    def test_zerodivision(self, a, b):
-        py.test.raises(ZeroDivisionError, "a/b")
-

example/funcarg/parametrize/test_parametrize3.py

@@ -1,15 +0,0 @@
-
-# following hook can be put unchanged into a local or global plugin
-def pytest_generate_tests(metafunc):
-    for scenario in metafunc.cls.scenarios:
-        metafunc.addcall(id=scenario[0], funcargs=scenario[1])
-
-
-scenario1 = ('basic', {'attribute': 'value'})
-scenario2 = ('advanced', {'attribute': 'value2'})
-
-class TestSampleWithScenarios:
-    scenarios = [scenario1, scenario2]
-
-    def test_demo(self, attribute):
-        assert isinstance(attribute, str)

example/funcarg/test_simpleprovider.py

@@ -1,7 +0,0 @@
-# ./test_simpleprovider.py
-def pytest_funcarg__myfuncarg(request):
-    return 42
-
-def test_function(myfuncarg):
-    assert myfuncarg == 17
-

example/funcarg/urloption/conftest.py

@@ -1,15 +0,0 @@
-# conftest.py
-import py
-
-
-def pytest_addoption(parser):
-    grp = parser.getgroup("testserver options")
-    grp.addoption("--url", action="store", default=None,
-        help="url for testserver")
-
-def pytest_funcarg__url(request):
-    url = request.config.getvalue("url")
-    if url is None:
-        py.test.skip("need --url")
-    return url
-

example/genhtml.py

@@ -1,13 +0,0 @@
-from py.xml import html
-
-paras = "First Para", "Second para"
-
-doc = html.html(
-   html.head(
-        html.meta(name="Content-Type", value="text/html; charset=latin1")),
-   html.body(
-        [html.p(p) for p in paras]))
-
-print unicode(doc).encode('latin1')
-
-

example/genhtmlcss.py

@@ -1,23 +0,0 @@
-import py
-html = py.xml.html
-
-class my(html):
-    "a custom style"
-    class body(html.body):
-        style = html.Style(font_size = "120%")
-
-    class h2(html.h2):
-        style = html.Style(background = "grey")
-
-    class p(html.p):
-        style = html.Style(font_weight="bold")
-
-doc = my.html(
-    my.head(),
-    my.body(
-        my.h2("hello world"),
-        my.p("bold as bold can")
-    )
-)
-
-print doc.unicode(indent=2)

example/genxml.py

@@ -1,17 +0,0 @@
-
-import py
-class ns(py.xml.Namespace):
-    pass
-
-doc = ns.books(
-    ns.book(
-        ns.author("May Day"),
-        ns.title("python for java programmers"),),
-    ns.book(
-        ns.author("why", class_="somecssclass"),
-        ns.title("Java for Python programmers"),),
-    publisher="N.N",
-    )
-print doc.unicode(indent=2).encode('utf8')
-
-

example/xfail_demo.py

@@ -1,16 +0,0 @@
-import py
-
-@py.test.mark.xfail
-def test_hello():
-    assert 0
-
-@py.test.mark.xfail(run=False)
-def test_hello2():
-    assert 0
-
-@py.test.mark.xfail("hasattr(os, 'sep')")
-def test_hello3():
-    assert 0
-
-def test_hello5():
-    py.test.xfail("reason")