Highlight docs with pygments-pytest

doc/en/assert.rst

@@ -22,7 +22,9 @@ following::
         assert f() == 4
 
 to assert that your function returns a certain value. If this assertion fails
-you will see the return value of the function call::
+you will see the return value of the function call:
+
+.. code-block:: pytest
 
     $ pytest test_assert1.py
     =========================== test session starts ============================
@@ -165,7 +167,9 @@ when it encounters comparisons.  For example::
         set2 = set("8035")
         assert set1 == set2
 
-if you run this module::
+if you run this module:
+
+.. code-block:: pytest
 
     $ pytest test_assert2.py
     =========================== test session starts ============================
@@ -235,7 +239,9 @@ now, given this test module::
        assert f1 == f2
 
 you can run the test module and get the custom output defined in
-the conftest file::
+the conftest file:
+
+.. code-block:: pytest
 
    $ pytest -q test_foocompare.py
    F                                                                    [100%]

doc/en/builtin.rst

@@ -12,7 +12,9 @@ For information on plugin hooks and objects, see :ref:`plugins`.
 
 For information on the ``pytest.mark`` mechanism, see :ref:`mark`.
 
-For information about fixtures, see :ref:`fixtures`. To see a complete list of available fixtures (add ``-v`` to also see fixtures with leading ``_``), type ::
+For information about fixtures, see :ref:`fixtures`. To see a complete list of available fixtures (add ``-v`` to also see fixtures with leading ``_``), type :
+
+.. code-block:: pytest
 
     $ pytest -q --fixtures
     cache

doc/en/cache.rst

@@ -43,7 +43,9 @@ First, let's create 50 test invocation of which only 2 fail::
         if i in (17, 25):
            pytest.fail("bad luck")
 
-If you run this for the first time you will see two failures::
+If you run this for the first time you will see two failures:
+
+.. code-block:: pytest
 
     $ pytest -q
     .................F.......F........................                   [100%]
@@ -72,7 +74,9 @@ If you run this for the first time you will see two failures::
     test_50.py:6: Failed
     2 failed, 48 passed in 0.12 seconds
 
-If you then run it with ``--lf``::
+If you then run it with ``--lf``:
+
+.. code-block:: pytest
 
     $ pytest --lf
     =========================== test session starts ============================
@@ -113,7 +117,9 @@ not been run ("deselected").
 
 Now, if you run with the ``--ff`` option, all tests will be run but the first
 previous failures will be executed first (as can be seen from the series
-of ``FF`` and dots)::
+of ``FF`` and dots):
+
+.. code-block:: pytest
 
     $ pytest --ff
     =========================== test session starts ============================
@@ -192,7 +198,9 @@ across pytest invocations::
         assert mydata == 23
 
 If you run this command once, it will take a while because
-of the sleep::
+of the sleep:
+
+.. code-block:: pytest
 
     $ pytest -q
     F                                                                    [100%]
@@ -209,7 +217,9 @@ of the sleep::
     1 failed in 0.12 seconds
 
 If you run it a second time the value will be retrieved from
-the cache and this will be quick::
+the cache and this will be quick:
+
+.. code-block:: pytest
 
     $ pytest -q
     F                                                                    [100%]
@@ -232,7 +242,9 @@ Inspecting Cache content
 -------------------------------
 
 You can always peek at the content of the cache using the
-``--cache-show`` command line option::
+``--cache-show`` command line option:
+
+.. code-block:: pytest
 
     $ pytest --cache-show
     =========================== test session starts ============================

doc/en/capture.rst

@@ -61,7 +61,9 @@ is that you can use print statements for debugging::
         assert False
 
 and running this module will show you precisely the output
-of the failing function and hide the other one::
+of the failing function and hide the other one:
+
+.. code-block:: pytest
 
     $ pytest
     =========================== test session starts ============================

doc/en/conf.py

@@ -40,6 +40,7 @@ todo_include_todos = 1
 # Add any Sphinx extension module names here, as strings. They can be extensions
 # coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
 extensions = [
+    "pygments_pytest",
     "sphinx.ext.autodoc",
     "sphinx.ext.todo",
     "sphinx.ext.autosummary",

doc/en/doctest.rst

@@ -58,7 +58,9 @@ and another like this::
         """
         return 42
 
-then you can just invoke ``pytest`` without command line options::
+then you can just invoke ``pytest`` without command line options:
+
+.. code-block:: pytest
 
     $ pytest
     =========================== test session starts ============================

doc/en/example/markers.rst

@@ -27,7 +27,9 @@ You can "mark" a test function with custom metadata like this::
 
 .. versionadded:: 2.2
 
-You can then restrict a test run to only run tests marked with ``webtest``::
+You can then restrict a test run to only run tests marked with ``webtest``:
+
+.. code-block:: pytest
 
     $ pytest -v -m webtest
     =========================== test session starts ============================
@@ -40,7 +42,9 @@ You can then restrict a test run to only run tests marked with ``webtest``::
 
     ================== 1 passed, 3 deselected in 0.12 seconds ==================
 
-Or the inverse, running all tests except the webtest ones::
+Or the inverse, running all tests except the webtest ones:
+
+.. code-block:: pytest
 
     $ pytest -v -m "not webtest"
     =========================== test session starts ============================
@@ -60,7 +64,9 @@ Selecting tests based on their node ID
 
 You can provide one or more :ref:`node IDs <node-id>` as positional
 arguments to select only specified tests. This makes it easy to select
-tests based on their module, class, method, or function name::
+tests based on their module, class, method, or function name:
+
+.. code-block:: pytest
 
     $ pytest -v test_server.py::TestClass::test_method
     =========================== test session starts ============================
@@ -73,7 +79,9 @@ tests based on their module, class, method, or function name::
 
     ========================= 1 passed in 0.12 seconds =========================
 
-You can also select on the class::
+You can also select on the class:
+
+.. code-block:: pytest
 
     $ pytest -v test_server.py::TestClass
     =========================== test session starts ============================
@@ -86,19 +94,21 @@ You can also select on the class::
 
     ========================= 1 passed in 0.12 seconds =========================
 
-Or select multiple nodes::
+Or select multiple nodes:
 
-  $ pytest -v test_server.py::TestClass test_server.py::test_send_http
+.. code-block:: pytest
-  =========================== test session starts ============================
-  platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y -- $PYTHON_PREFIX/bin/python3.6
-  cachedir: .pytest_cache
-  rootdir: $REGENDOC_TMPDIR, inifile:
-  collecting ... collected 2 items
 
-  test_server.py::TestClass::test_method PASSED                        [ 50%]
+    $ pytest -v test_server.py::TestClass test_server.py::test_send_http
-  test_server.py::test_send_http PASSED                                [100%]
+    =========================== test session starts ============================
+    platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y -- $PYTHON_PREFIX/bin/python3.6
+    cachedir: .pytest_cache
+    rootdir: $REGENDOC_TMPDIR, inifile:
+    collecting ... collected 2 items
 
-  ========================= 2 passed in 0.12 seconds =========================
+    test_server.py::TestClass::test_method PASSED                        [ 50%]
+    test_server.py::test_send_http PASSED                                [100%]
+
+    ========================= 2 passed in 0.12 seconds =========================
 
 .. _node-id:
 
@@ -124,7 +134,9 @@ Using ``-k expr`` to select tests based on their name
 You can use the ``-k`` command line option to specify an expression
 which implements a substring match on the test names instead of the
 exact match on markers that ``-m`` provides.  This makes it easy to
-select tests based on their names::
+select tests based on their names:
+
+.. code-block:: pytest
 
     $ pytest -v -k http  # running with the above defined example module
     =========================== test session starts ============================
@@ -137,7 +149,9 @@ select tests based on their names::
 
     ================== 1 passed, 3 deselected in 0.12 seconds ==================
 
-And you can also run all tests except the ones that match the keyword::
+And you can also run all tests except the ones that match the keyword:
+
+.. code-block:: pytest
 
     $ pytest -k "not send_http" -v
     =========================== test session starts ============================
@@ -152,7 +166,9 @@ And you can also run all tests except the ones that match the keyword::
 
     ================== 3 passed, 1 deselected in 0.12 seconds ==================
 
-Or to select "http" and "quick" tests::
+Or to select "http" and "quick" tests:
+
+.. code-block:: pytest
 
     $ pytest -k "http or quick" -v
     =========================== test session starts ============================
@@ -351,7 +367,9 @@ A test file using this local plugin::
         pass
 
 and an example invocations specifying a different environment than what
-the test needs::
+the test needs:
+
+.. code-block:: pytest
 
     $ pytest -E stage2
     =========================== test session starts ============================
@@ -363,7 +381,9 @@ the test needs::
 
     ======================== 1 skipped in 0.12 seconds =========================
 
-and here is one that specifies exactly the environment needed::
+and here is one that specifies exactly the environment needed:
+
+.. code-block:: pytest
 
     $ pytest -E stage1
     =========================== test session starts ============================
@@ -428,7 +448,9 @@ However, if there is a callable as the single positional argument with no keywor
     def test_with_args():
         pass
 
-The output is as follows::
+The output is as follows:
+
+.. code-block:: pytest
 
     $ pytest -q -s
     Mark(name='my_marker', args=(<function hello_world at 0xdeadbeef>,), kwargs={})
@@ -469,7 +491,9 @@ test function.  From a conftest file we can read it like this::
             print("glob args=%s kwargs=%s" % (mark.args, mark.kwargs))
             sys.stdout.flush()
 
-Let's run this without capturing output and see what we get::
+Let's run this without capturing output and see what we get:
+
+.. code-block:: pytest
 
     $ pytest -q -s
     glob args=('function',) kwargs={'x': 3}
@@ -524,7 +548,9 @@ Let's do a little test file to show how this looks like::
     def test_runs_everywhere():
         pass
 
-then you will see two tests skipped and two executed tests as expected::
+then you will see two tests skipped and two executed tests as expected:
+
+.. code-block:: pytest
 
     $ pytest -rs # this option reports skip reasons
     =========================== test session starts ============================
@@ -538,7 +564,9 @@ then you will see two tests skipped and two executed tests as expected::
 
     =================== 2 passed, 2 skipped in 0.12 seconds ====================
 
-Note that if you specify a platform via the marker-command line option like this::
+Note that if you specify a platform via the marker-command line option like this:
+
+.. code-block:: pytest
 
     $ pytest -m linux
     =========================== test session starts ============================
@@ -589,48 +617,52 @@ We want to dynamically define two markers and can do it in a
             elif "event" in item.nodeid:
                 item.add_marker(pytest.mark.event)
 
-We can now use the ``-m option`` to select one set::
+We can now use the ``-m option`` to select one set:
 
-  $ pytest -m interface --tb=short
+.. code-block:: pytest
-  =========================== test session starts ============================
-  platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
-  rootdir: $REGENDOC_TMPDIR, inifile:
-  collected 4 items / 2 deselected
 
-  test_module.py FF                                                    [100%]
+    $ pytest -m interface --tb=short
+    =========================== test session starts ============================
+    platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
+    rootdir: $REGENDOC_TMPDIR, inifile:
+    collected 4 items / 2 deselected
 
-  ================================= FAILURES =================================
+    test_module.py FF                                                    [100%]
-  __________________________ test_interface_simple ___________________________
-  test_module.py:3: in test_interface_simple
-      assert 0
-  E   assert 0
-  __________________________ test_interface_complex __________________________
-  test_module.py:6: in test_interface_complex
-      assert 0
-  E   assert 0
-  ================== 2 failed, 2 deselected in 0.12 seconds ==================
 
-or to select both "event" and "interface" tests::
+    ================================= FAILURES =================================
+    __________________________ test_interface_simple ___________________________
+    test_module.py:3: in test_interface_simple
+        assert 0
+    E   assert 0
+    __________________________ test_interface_complex __________________________
+    test_module.py:6: in test_interface_complex
+        assert 0
+    E   assert 0
+    ================== 2 failed, 2 deselected in 0.12 seconds ==================
 
-  $ pytest -m "interface or event" --tb=short
+or to select both "event" and "interface" tests:
-  =========================== test session starts ============================
-  platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
-  rootdir: $REGENDOC_TMPDIR, inifile:
-  collected 4 items / 1 deselected
 
-  test_module.py FFF                                                   [100%]
+.. code-block:: pytest
 
-  ================================= FAILURES =================================
+    $ pytest -m "interface or event" --tb=short
-  __________________________ test_interface_simple ___________________________
+    =========================== test session starts ============================
-  test_module.py:3: in test_interface_simple
+    platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
-      assert 0
+    rootdir: $REGENDOC_TMPDIR, inifile:
-  E   assert 0
+    collected 4 items / 1 deselected
-  __________________________ test_interface_complex __________________________
+
-  test_module.py:6: in test_interface_complex
+    test_module.py FFF                                                   [100%]
-      assert 0
+
-  E   assert 0
+    ================================= FAILURES =================================
-  ____________________________ test_event_simple _____________________________
+    __________________________ test_interface_simple ___________________________
-  test_module.py:9: in test_event_simple
+    test_module.py:3: in test_interface_simple
-      assert 0
+        assert 0
-  E   assert 0
+    E   assert 0
-  ================== 3 failed, 1 deselected in 0.12 seconds ==================
+    __________________________ test_interface_complex __________________________
+    test_module.py:6: in test_interface_complex
+        assert 0
+    E   assert 0
+    ____________________________ test_event_simple _____________________________
+    test_module.py:9: in test_event_simple
+        assert 0
+    E   assert 0
+    ================== 3 failed, 1 deselected in 0.12 seconds ==================

doc/en/example/nonpython.rst

@@ -23,7 +23,9 @@ You can create a simple example file:
     :literal:
 
 and if you installed `PyYAML`_ or a compatible YAML-parser you can
-now execute the test specification::
+now execute the test specification:
+
+.. code-block:: pytest
 
     nonpython $ pytest test_simple.yml
     =========================== test session starts ============================
@@ -55,7 +57,9 @@ your own domain specific testing language this way.
     will be reported as a (red) string.
 
 ``reportinfo()`` is used for representing the test location and is also
-consulted when reporting in ``verbose`` mode::
+consulted when reporting in ``verbose`` mode:
+
+.. code-block:: pytest
 
     nonpython $ pytest -v
     =========================== test session starts ============================
@@ -77,7 +81,9 @@ consulted when reporting in ``verbose`` mode::
 .. regendoc:wipe
 
 While developing your custom test collection and execution it's also
-interesting to just look at the collection tree::
+interesting to just look at the collection tree:
+
+.. code-block:: pytest
 
     nonpython $ pytest --collect-only
     =========================== test session starts ============================

doc/en/example/parametrize.rst

@@ -42,14 +42,18 @@ Now we add a test configuration like this::
                 end = 2
             metafunc.parametrize("param1", range(end))
 
-This means that we only run 2 tests if we do not pass ``--all``::
+This means that we only run 2 tests if we do not pass ``--all``:
+
+.. code-block:: pytest
 
     $ pytest -q test_compute.py
     ..                                                                   [100%]
     2 passed in 0.12 seconds
 
 We run only two computations, so we see two dots.
-let's run the full monty::
+let's run the full monty:
+
+.. code-block:: pytest
 
     $ pytest -q --all
     ....F                                                                [100%]
@@ -134,8 +138,9 @@ used as the test IDs. These are succinct, but can be a pain to maintain.
 In ``test_timedistance_v2``, we specified ``ids`` as a function that can generate a
 string representation to make part of the test ID. So our ``datetime`` values use the
 label generated by ``idfn``, but because we didn't generate a label for ``timedelta``
-objects, they are still using the default pytest representation::
+objects, they are still using the default pytest representation:
 
+.. code-block:: pytest
 
     $ pytest test_time.py --collect-only
     =========================== test session starts ============================
@@ -191,7 +196,9 @@ only have to work a bit to construct the correct arguments for pytest's
         def test_demo2(self, attribute):
             assert isinstance(attribute, str)
 
-this is a fully self-contained example which you can run with::
+this is a fully self-contained example which you can run with:
+
+.. code-block:: pytest
 
     $ pytest test_scenarios.py
     =========================== test session starts ============================
@@ -203,8 +210,9 @@ this is a fully self-contained example which you can run with::
 
     ========================= 4 passed in 0.12 seconds =========================
 
-If you just collect tests you'll also nicely see 'advanced' and 'basic' as variants for the test function::
+If you just collect tests you'll also nicely see 'advanced' and 'basic' as variants for the test function:
 
+.. code-block:: pytest
 
     $ pytest --collect-only test_scenarios.py
     =========================== test session starts ============================
@@ -268,7 +276,9 @@ creates a database object for the actual test invocations::
         else:
             raise ValueError("invalid internal test config")
 
-Let's first see how it looks like at collection time::
+Let's first see how it looks like at collection time:
+
+.. code-block:: pytest
 
     $ pytest test_backends.py --collect-only
     =========================== test session starts ============================
@@ -281,7 +291,9 @@ Let's first see how it looks like at collection time::
 
     ======================= no tests ran in 0.12 seconds =======================
 
-And then when we run the test::
+And then when we run the test:
+
+.. code-block:: pytest
 
     $ pytest -q test_backends.py
     .F                                                                   [100%]
@@ -329,7 +341,9 @@ will be passed to respective fixture function::
         assert x == 'aaa'
         assert y == 'b'
 
-The result of this test will be successful::
+The result of this test will be successful:
+
+.. code-block:: pytest
 
     $ pytest test_indirect_list.py --collect-only
     =========================== test session starts ============================
@@ -377,7 +391,9 @@ parametrizer`_ but in a lot less code::
             pytest.raises(ZeroDivisionError, "a/b")
 
 Our test generator looks up a class-level definition which specifies which
-argument sets to use for each test function.  Let's run it::
+argument sets to use for each test function.  Let's run it:
+
+.. code-block:: pytest
 
     $ pytest -q
     F..                                                                  [100%]
@@ -407,7 +423,9 @@ is to be run with different sets of arguments for its three arguments:
 
 .. literalinclude:: multipython.py
 
-Running it results in some skips if we don't have all the python interpreters installed and otherwise runs all combinations (5 interpreters times 5 interpreters times 3 objects to serialize/deserialize)::
+Running it results in some skips if we don't have all the python interpreters installed and otherwise runs all combinations (5 interpreters times 5 interpreters times 3 objects to serialize/deserialize):
+
+.. code-block:: pytest
 
    . $ pytest -rs -q multipython.py
    ...sss...sssssssss...sss...                                          [100%]
@@ -456,7 +474,9 @@ And finally a little test module::
         assert round(basemod.func1(), 3) == round(optmod.func1(), 3)
 
 
-If you run this with reporting for skips enabled::
+If you run this with reporting for skips enabled:
+
+.. code-block:: pytest
 
     $ pytest -rs test_module.py
     =========================== test session starts ============================
@@ -511,21 +531,22 @@ we mark the rest three parametrized tests with the custom marker ``basic``,
 and for the fourth test we also use the built-in mark ``xfail`` to indicate this
 test is expected to fail. For explicitness, we set test ids for some tests.
 
-Then run ``pytest`` with verbose mode and with only the ``basic`` marker::
+Then run ``pytest`` with verbose mode and with only the ``basic`` marker:
 
-    pytest -v -m basic
+.. code-block:: pytest
-    ============================================ test session starts =============================================
+
-    platform linux -- Python 3.x.y, pytest-3.x.y, py-1.x.y, pluggy-0.x.y
+    $ pytest -v -m basic
+    =========================== test session starts ============================
+    platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y -- $PYTHON_PREFIX/bin/python
+    cachedir: .pytest_cache
     rootdir: $REGENDOC_TMPDIR, inifile:
-    collected 4 items
+    collecting ... collected 17 items / 14 deselected
 
-    test_pytest_param_example.py::test_eval[1+7-8] PASSED
+    test_pytest_param_example.py::test_eval[1+7-8] PASSED                [ 33%]
-    test_pytest_param_example.py::test_eval[basic_2+4] PASSED
+    test_pytest_param_example.py::test_eval[basic_2+4] PASSED            [ 66%]
-    test_pytest_param_example.py::test_eval[basic_6*9] xfail
+    test_pytest_param_example.py::test_eval[basic_6*9] xfail             [100%]
-    ========================================== short test summary info ===========================================
-    XFAIL test_pytest_param_example.py::test_eval[basic_6*9]
 
-    ============================================= 1 tests deselected =============================================
+    ============ 2 passed, 14 deselected, 1 xfailed in 0.12 seconds ============
 
 As the result:
 

doc/en/example/pythoncollection.rst

@@ -24,20 +24,22 @@ by passing the ``--ignore=path`` option on the cli. ``pytest`` allows multiple
             '-- test_world_03.py
 
 Now if you invoke ``pytest`` with ``--ignore=tests/foobar/test_foobar_03.py --ignore=tests/hello/``,
-you will see that ``pytest`` only collects test-modules, which do not match the patterns specified::
+you will see that ``pytest`` only collects test-modules, which do not match the patterns specified:
 
-    ========= test session starts ==========
+.. code-block:: pytest
-    platform darwin -- Python 2.7.10, pytest-2.8.2, py-1.4.30, pluggy-0.3.1
+
+    =========================== test session starts ============================
+    platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
     rootdir: $REGENDOC_TMPDIR, inifile:
     collected 5 items
 
-    tests/example/test_example_01.py .
+    tests/example/test_example_01.py .                                   [ 20%]
-    tests/example/test_example_02.py .
+    tests/example/test_example_02.py .                                   [ 40%]
-    tests/example/test_example_03.py .
+    tests/example/test_example_03.py .                                   [ 60%]
-    tests/foobar/test_foobar_01.py .
+    tests/foobar/test_foobar_01.py .                                     [ 80%]
-    tests/foobar/test_foobar_02.py .
+    tests/foobar/test_foobar_02.py .                                     [100%]
 
-    ======= 5 passed in 0.02 seconds =======
+    ========================= 5 passed in 0.02 seconds =========================
 
 Deselect tests during test collection
 -------------------------------------
@@ -123,7 +125,9 @@ that match ``*_check``. For example, if we have::
         def complex_check(self):
             pass
 
-The test collection would look like this::
+The test collection would look like this:
+
+.. code-block:: pytest
 
     $ pytest --collect-only
     =========================== test session starts ============================
@@ -176,7 +180,9 @@ treat it as a filesystem path.
 Finding out what is collected
 -----------------------------------------------
 
-You can always peek at the collection tree without running tests like this::
+You can always peek at the collection tree without running tests like this:
+
+.. code-block:: pytest
 
     . $ pytest --collect-only pythoncollection.py
     =========================== test session starts ============================
@@ -231,7 +237,9 @@ and a ``setup.py`` dummy file like this::
     0/0  # will raise exception if imported
 
 If you run with a Python 2 interpreter then you will find the one test and will
-leave out the ``setup.py`` file::
+leave out the ``setup.py`` file:
+
+.. code-block:: pytest
 
     #$ pytest --collect-only
     ====== test session starts ======
@@ -244,7 +252,9 @@ leave out the ``setup.py`` file::
     ====== no tests ran in 0.04 seconds ======
 
 If you run with a Python 3 interpreter both the one test and the ``setup.py``
-file will be left out::
+file will be left out:
+
+.. code-block:: pytest
 
     $ pytest --collect-only
     =========================== test session starts ============================

doc/en/example/reportingdemo.rst

@@ -7,7 +7,9 @@ Demo of Python failure reports with pytest
 Here is a nice run of several tens of failures
 and how ``pytest`` presents things (unfortunately
 not showing the nice colors here in the HTML that you
-get on the terminal - we are working on that)::
+get on the terminal - we are working on that):
+
+.. code-block:: pytest
 
     assertion $ pytest failure_demo.py
     =========================== test session starts ============================
@@ -364,7 +366,7 @@ get on the terminal - we are working on that)::
     >   int(s)
     E   ValueError: invalid literal for int() with base 10: 'qwe'
 
-    <0-codegen $PYTHON_PREFIX/lib/python3.6/site-packages/_pytest/python_api.py:682>:1: ValueError
+    <0-codegen $REGENDOC_TMPDIR/assertion/failure_demo.py:145>:1: ValueError
     ______________________ TestRaises.test_raises_doesnt _______________________
 
     self = <failure_demo.TestRaises object at 0xdeadbeef>

doc/en/example/simple.rst

@@ -43,7 +43,9 @@ provide the ``cmdopt`` through a :ref:`fixture function <fixture function>`:
     def cmdopt(request):
         return request.config.getoption("--cmdopt")
 
-Let's run this without supplying our new option::
+Let's run this without supplying our new option:
+
+.. code-block:: pytest
 
     $ pytest -q test_sample.py
     F                                                                    [100%]
@@ -65,7 +67,9 @@ Let's run this without supplying our new option::
     first
     1 failed in 0.12 seconds
 
-And now with supplying a command line option::
+And now with supplying a command line option:
+
+.. code-block:: pytest
 
     $ pytest -q --cmdopt=type2
     F                                                                    [100%]
@@ -117,7 +121,9 @@ the command line arguments before they get processed:
 If you have the `xdist plugin <https://pypi.org/project/pytest-xdist/>`_ installed
 you will now always perform test runs using a number
 of subprocesses close to your CPU. Running in an empty
-directory with the above conftest.py::
+directory with the above conftest.py:
+
+.. code-block:: pytest
 
     $ pytest
     =========================== test session starts ============================
@@ -175,7 +181,9 @@ We can now write a test module like this:
     def test_func_slow():
         pass
 
-and when running it will see a skipped "slow" test::
+and when running it will see a skipped "slow" test:
+
+.. code-block:: pytest
 
     $ pytest -rs    # "-rs" means report details on the little 's'
     =========================== test session starts ============================
@@ -189,7 +197,9 @@ and when running it will see a skipped "slow" test::
 
     =================== 1 passed, 1 skipped in 0.12 seconds ====================
 
-Or run it including the ``slow`` marked test::
+Or run it including the ``slow`` marked test:
+
+.. code-block:: pytest
 
     $ pytest --runslow
     =========================== test session starts ============================
@@ -230,7 +240,9 @@ Example:
 The ``__tracebackhide__`` setting influences ``pytest`` showing
 of tracebacks: the ``checkconfig`` function will not be shown
 unless the ``--full-trace`` command line option is specified.
-Let's run our little function::
+Let's run our little function:
+
+.. code-block:: pytest
 
     $ pytest -q test_checkconfig.py
     F                                                                    [100%]
@@ -327,7 +339,9 @@ It's easy to present extra information in a ``pytest`` run:
     def pytest_report_header(config):
         return "project deps: mylib-1.1"
 
-which will add the string to the test header accordingly::
+which will add the string to the test header accordingly:
+
+.. code-block:: pytest
 
     $ pytest
     =========================== test session starts ============================
@@ -353,7 +367,9 @@ display more information if applicable:
         if config.getoption("verbose") > 0:
             return ["info1: did you know that ...", "did you?"]
 
-which will add info only when run with "--v"::
+which will add info only when run with "--v":
+
+.. code-block:: pytest
 
     $ pytest -v
     =========================== test session starts ============================
@@ -366,7 +382,9 @@ which will add info only when run with "--v"::
 
     ======================= no tests ran in 0.12 seconds =======================
 
-and nothing when run plainly::
+and nothing when run plainly:
+
+.. code-block:: pytest
 
     $ pytest
     =========================== test session starts ============================
@@ -403,7 +421,9 @@ out which tests are the slowest. Let's make an artificial test suite:
     def test_funcslow2():
         time.sleep(0.3)
 
-Now we can profile which test functions execute the slowest::
+Now we can profile which test functions execute the slowest:
+
+.. code-block:: pytest
 
     $ pytest --durations=3
     =========================== test session starts ============================
@@ -475,7 +495,9 @@ tests in a class.  Here is a test module example:
     def test_normal():
         pass
 
-If we run this::
+If we run this:
+
+.. code-block:: pytest
 
     $ pytest -rx
     =========================== test session starts ============================
@@ -556,7 +578,9 @@ the ``db`` fixture:
     def test_root(db):  # no db here, will error out
         pass
 
-We can run this::
+We can run this:
+
+.. code-block:: pytest
 
     $ pytest
     =========================== test session starts ============================
@@ -667,7 +691,9 @@ if you then have failing tests:
     def test_fail2():
         assert 0
 
-and run them::
+and run them:
+
+.. code-block:: pytest
 
     $ pytest test_module.py
     =========================== test session starts ============================
@@ -766,7 +792,9 @@ if you then have failing tests:
     def test_fail2():
         assert 0
 
-and run it::
+and run it:
+
+.. code-block:: pytest
 
     $ pytest -s test_module.py
     =========================== test session starts ============================

doc/en/example/special.rst

@@ -57,7 +57,9 @@ will be called ahead of running any tests::
         def test_unit1(self):
             print("test_unit1 method called")
 
-If you run this without output capturing::
+If you run this without output capturing:
+
+.. code-block:: pytest
 
     $ pytest -q -s test_module.py
     callattr_ahead_of_alltests called

doc/en/fixture.rst

@@ -66,7 +66,9 @@ using it::
 
 Here, the ``test_ehlo`` needs the ``smtp_connection`` fixture value.  pytest
 will discover and call the :py:func:`@pytest.fixture <_pytest.python.fixture>`
-marked ``smtp_connection`` fixture function.  Running the test looks like this::
+marked ``smtp_connection`` fixture function.  Running the test looks like this:
+
+.. code-block:: pytest
 
     $ pytest test_smtpsimple.py
     =========================== test session starts ============================
@@ -204,7 +206,9 @@ located)::
         assert 0  # for demo purposes
 
 We deliberately insert failing ``assert 0`` statements in order to
-inspect what is going on and can now run the tests::
+inspect what is going on and can now run the tests:
+
+.. code-block:: pytest
 
     $ pytest test_module.py
     =========================== test session starts ============================
@@ -482,7 +486,9 @@ server URL in its module namespace::
     def test_showhelo(smtp_connection):
         assert 0, smtp_connection.helo()
 
-Running it::
+Running it:
+
+.. code-block:: pytest
 
     $ pytest -qq --tb=short test_anothersmtp.py
     F                                                                    [100%]
@@ -584,7 +590,9 @@ The main change is the declaration of ``params`` with
 :py:func:`@pytest.fixture <_pytest.python.fixture>`, a list of values
 for each of which the fixture function will execute and can access
 a value via ``request.param``.  No test function code needs to change.
-So let's just do another run::
+So let's just do another run:
+
+.. code-block:: pytest
 
     $ pytest -q test_module.py
     FFFF                                                                 [100%]
@@ -686,7 +694,9 @@ a function which will be called with the fixture value and then
 has to return a string to use.  In the latter case if the function
 return ``None`` then pytest's auto-generated ID will be used.
 
-Running the above tests results in the following test IDs being used::
+Running the above tests results in the following test IDs being used:
+
+.. code-block:: pytest
 
    $ pytest --collect-only
    =========================== test session starts ============================
@@ -728,7 +738,9 @@ Example::
     def test_data(data_set):
         pass
 
-Running this test will *skip* the invocation of ``data_set`` with value ``2``::
+Running this test will *skip* the invocation of ``data_set`` with value ``2``:
+
+.. code-block:: pytest
 
     $ pytest test_fixture_marks.py -v
     =========================== test session starts ============================
@@ -771,7 +783,9 @@ and instantiate an object ``app`` where we stick the already defined
         assert app.smtp_connection
 
 Here we declare an ``app`` fixture which receives the previously defined
-``smtp_connection`` fixture and instantiates an ``App`` object with it.  Let's run it::
+``smtp_connection`` fixture and instantiates an ``App`` object with it.  Let's run it:
+
+.. code-block:: pytest
 
     $ pytest -v test_appsetup.py
     =========================== test session starts ============================
@@ -840,7 +854,9 @@ to show the setup/teardown flow::
         print("  RUN test2 with otherarg %s and modarg %s" % (otherarg, modarg))
 
 
-Let's run the tests in verbose mode and with looking at the print-output::
+Let's run the tests in verbose mode and with looking at the print-output:
+
+.. code-block:: pytest
 
     $ pytest -v -s test_module.py
     =========================== test session starts ============================
@@ -942,7 +958,9 @@ and declare its use in a test module via a ``usefixtures`` marker::
 Due to the ``usefixtures`` marker, the ``cleandir`` fixture
 will be required for the execution of each test method, just as if
 you specified a "cleandir" function argument to each of them.  Let's run it
-to verify our fixture is activated and the tests pass::
+to verify our fixture is activated and the tests pass:
+
+.. code-block:: pytest
 
     $ pytest -q
     ..                                                                   [100%]
@@ -1041,7 +1059,9 @@ which implies that all test methods in the class will use this fixture
 without a need to state it in the test function signature or with a
 class-level ``usefixtures`` decorator.
 
-If we run it, we get two passing tests::
+If we run it, we get two passing tests:
+
+.. code-block:: pytest
 
     $ pytest -q
     ..                                                                   [100%]

doc/en/getting-started.rst

@@ -43,7 +43,9 @@ Create a simple test function with just four lines of code::
     def test_answer():
         assert func(3) == 5
 
-That’s it. You can now execute the test function::
+That’s it. You can now execute the test function:
+
+.. code-block:: pytest
 
     $ pytest
     =========================== test session starts ============================
@@ -90,7 +92,9 @@ Use the ``raises`` helper to assert that some code raises an exception::
         with pytest.raises(SystemExit):
             f()
 
-Execute the test function with “quiet” reporting mode::
+Execute the test function with “quiet” reporting mode:
+
+.. code-block:: pytest
 
     $ pytest -q test_sysexit.py
     .                                                                    [100%]
@@ -111,7 +115,9 @@ Once you develop multiple tests, you may want to group them into a class. pytest
             x = "hello"
             assert hasattr(x, 'check')
 
-``pytest`` discovers all tests following its :ref:`Conventions for Python test discovery <test discovery>`, so it finds both ``test_`` prefixed functions. There is no need to subclass anything. We can simply run the module by passing its filename::
+``pytest`` discovers all tests following its :ref:`Conventions for Python test discovery <test discovery>`, so it finds both ``test_`` prefixed functions. There is no need to subclass anything. We can simply run the module by passing its filename:
+
+.. code-block:: pytest
 
     $ pytest -q test_class.py
     .F                                                                   [100%]
@@ -141,7 +147,9 @@ Request a unique temporary directory for functional tests
         print(tmpdir)
         assert 0
 
-List the name ``tmpdir`` in the test function signature and ``pytest`` will lookup and call a fixture factory to create the resource before performing the test function call. Before the test runs, ``pytest`` creates a unique-per-test-invocation temporary directory::
+List the name ``tmpdir`` in the test function signature and ``pytest`` will lookup and call a fixture factory to create the resource before performing the test function call. Before the test runs, ``pytest`` creates a unique-per-test-invocation temporary directory:
+
+.. code-block:: pytest
 
     $ pytest -q test_tmpdir.py
     F                                                                    [100%]

doc/en/index.rst

@@ -22,7 +22,9 @@ An example of a simple test:
         assert inc(3) == 5
 
 
-To execute it::
+To execute it:
+
+.. code-block:: pytest
 
     $ pytest
     =========================== test session starts ============================

doc/en/parametrize.rst

@@ -50,7 +50,9 @@ to an expected output::
 
 Here, the ``@parametrize`` decorator defines three different ``(test_input,expected)``
 tuples so that the ``test_eval`` function will run three times using
-them in turn::
+them in turn:
+
+.. code-block:: pytest
 
     $ pytest
     =========================== test session starts ============================
@@ -99,7 +101,9 @@ for example with the builtin ``mark.xfail``::
     def test_eval(test_input, expected):
         assert eval(test_input) == expected
 
-Let's run this::
+Let's run this:
+
+.. code-block:: pytest
 
     $ pytest
     =========================== test session starts ============================
@@ -172,7 +176,9 @@ If we now pass two stringinput values, our test will run twice::
     ..                                                                   [100%]
     2 passed in 0.12 seconds
 
-Let's also run with a stringinput that will lead to a failing test::
+Let's also run with a stringinput that will lead to a failing test:
+
+.. code-block:: pytest
 
     $ pytest -q --stringinput="!" test_strings.py
     F                                                                    [100%]
@@ -194,7 +200,9 @@ As expected our test function fails.
 
 If you don't specify a stringinput it will be skipped because
 ``metafunc.parametrize()`` will be called with an empty parameter
-list::
+list:
+
+.. code-block:: pytest
 
     $ pytest -q -rs test_strings.py
     s                                                                    [100%]

doc/en/skipping.rst

@@ -323,7 +323,9 @@ Here is a simple test file with the several usages:
 
 .. literalinclude:: example/xfail_demo.py
 
-Running it with the report-on-xfail option gives this output::
+Running it with the report-on-xfail option gives this output:
+
+.. code-block:: pytest
 
     example $ pytest -rx xfail_demo.py
     =========================== test session starts ============================

doc/en/tmpdir.rst

@@ -35,7 +35,9 @@ created in the `base temporary directory`_.
         assert 0
 
 Running this would result in a passed test except for the last
-``assert 0`` line which we use to look at values::
+``assert 0`` line which we use to look at values:
+
+.. code-block:: pytest
 
     $ pytest test_tmp_path.py
     =========================== test session starts ============================
@@ -95,7 +97,9 @@ and more.  Here is an example test usage::
         assert 0
 
 Running this would result in a passed test except for the last
-``assert 0`` line which we use to look at values::
+``assert 0`` line which we use to look at values:
+
+.. code-block:: pytest
 
     $ pytest test_tmpdir.py
     =========================== test session starts ============================

doc/en/unittest.rst

@@ -122,7 +122,9 @@ fixture definition::
 The ``@pytest.mark.usefixtures("db_class")`` class-decorator makes sure that
 the pytest fixture function ``db_class`` is called once per class.
 Due to the deliberately failing assert statements, we can take a look at
-the ``self.db`` values in the traceback::
+the ``self.db`` values in the traceback:
+
+.. code-block:: pytest
 
     $ pytest test_unittest_db.py
     =========================== test session starts ============================
@@ -199,7 +201,9 @@ used for all methods of the class where it is defined.  This is a
 shortcut for using a ``@pytest.mark.usefixtures("initdir")`` marker
 on the class like in the previous example.
 
-Running this test module ...::
+Running this test module ...:
+
+.. code-block:: pytest
 
     $ pytest -q test_unittest_cleandir.py
     .                                                                    [100%]

doc/en/usage.rst

@@ -150,7 +150,9 @@ Detailed summary report
 The ``-r`` flag can be used to display test results summary at the end of the test session,
 making it easy in large test suites to get a clear picture of all failures, skips, xfails, etc.
 
-Example::
+Example:
+
+.. code-block:: pytest
 
     $ pytest -ra
     =========================== test session starts ============================
@@ -173,7 +175,9 @@ Here is the full list of available characters that can be used:
  - ``P`` - passed with output
  - ``a`` - all except ``pP``
 
-More than one character can be used, so for example to only see failed and skipped tests, you can execute::
+More than one character can be used, so for example to only see failed and skipped tests, you can execute:
+
+.. code-block:: pytest
 
     $ pytest -rfs
     =========================== test session starts ============================

doc/en/warnings.rst

@@ -18,7 +18,9 @@ and displays them at the end of the session::
     def test_one():
         assert api_v1() == 1
 
-Running pytest now produces this output::
+Running pytest now produces this output:
+
+.. code-block:: pytest
 
     $ pytest test_show_warnings.py
     =========================== test session starts ============================
@@ -37,7 +39,9 @@ Running pytest now produces this output::
     =================== 1 passed, 1 warnings in 0.12 seconds ===================
 
 The ``-W`` flag can be passed to control which warnings will be displayed or even turn
-them into errors::
+them into errors:
+
+.. code-block:: pytest
 
     $ pytest -q test_show_warnings.py -W error::UserWarning
     F                                                                    [100%]
@@ -347,7 +351,7 @@ defines an ``__init__`` constructor, as this prevents the class from being insta
         def test_foo(self):
             assert 1 == 1
 
-::
+.. code-block:: pytest
 
     $ pytest test_pytest_warnings.py -q
 

doc/en/writing_plugins.rst

@@ -388,26 +388,27 @@ return a result object, with which we can assert the tests' outcomes.
 
 additionally it is possible to copy examples for an example folder before running pytest on it
 
-.. code:: ini
+.. code-block:: ini
 
   # content of pytest.ini
   [pytest]
   pytester_example_dir = .
 
 
-.. code:: python
+.. code-block:: python
 
     # content of test_example.py
 
 
     def test_plugin(testdir):
-      testdir.copy_example("test_example.py")
+        testdir.copy_example("test_example.py")
-      testdir.runpytest("-k", "test_example")
+        testdir.runpytest("-k", "test_example")
+
 
     def test_example():
-      pass
+        pass
 
-.. code::
+.. code-block:: pytest
 
     $ pytest
     =========================== test session starts ============================

tox.ini

@@ -126,6 +126,7 @@ usedevelop = True
 changedir = doc/en
 deps =
     PyYAML
+    pygments-pytest>=1.0.2
     sphinx
     sphinxcontrib-trio