perl/win32/makefile.mk

#
# Makefile to build perl on Windows using DMAKE.
# Supported compilers:
#	Microsoft Visual C++ 6.0 or later
#	MinGW with gcc-3.4.5 or later with runtime < 3.21
#	MinGW64 with gcc-4.4.3 or later
#	Windows SDK 64-bit compiler and tools
#
# This is set up to build a perl.exe that runs off a shared library
# (perl530.dll).  Also makes individual DLLs for the XS extensions.
#

##
## Make sure you read README.win32 *before* you mess with anything here!
##

#
# Import everything from the environment like NMAKE does.
#
.IMPORT : .EVERYTHING

##
## Build configuration.  Edit the values below to suit your needs.
##

#
# Set these to wherever you want "dmake install" to put your
# newly built perl.
#
INST_DRV	*= c:
INST_TOP	*= $(INST_DRV)\perl

#
# Uncomment if you want to build a 32-bit Perl using a 32-bit compiler
# on a 64-bit version of Windows.
#
#WIN64		*= undef

#
# Comment this out if you DON'T want your perl installation to be versioned.
# This means that the new installation will overwrite any files from the
# old installation at the same INST_TOP location.  Leaving it enabled is
# the safest route, as perl adds the extra version directory to all the
# locations it installs files to.  If you disable it, an alternative
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
#INST_VER	*= \5.30.0

#
# Comment this out if you DON'T want your perl installation to have
# architecture specific components.  This means that architecture-
# specific files will be installed along with the architecture-neutral
# files.  Leaving it enabled is safer and more flexible, in case you
# want to build multiple flavors of perl and install them together in
# the same location.  Commenting it out gives you a simpler
# installation that is easier to understand for beginners.
#
#INST_ARCH	*= \$(ARCHNAME)

#
# Uncomment this if you want perl to run
# 	$Config{sitelibexp}\sitecustomize.pl
# before anything else.  This script can then be set up, for example,
# to add additional entries to @INC.
#
#USE_SITECUST	*= define

#
# uncomment to enable multiple interpreters.  This is needed for fork()
# emulation and for thread support, and is auto-enabled by USE_IMP_SYS
# and USE_ITHREADS below.
#
USE_MULTI	*= define

#
# Interpreter cloning/threads; now reasonably complete.
# This should be enabled to get the fork() emulation.  This needs (and
# will auto-enable) USE_MULTI above.
#
USE_ITHREADS	*= define

#
# uncomment to enable the implicit "host" layer for all system calls
# made by perl.  This is also needed to get fork().  This needs (and
# will auto-enable) USE_MULTI above.
#
USE_IMP_SYS	*= define

#
# Comment this out if you don't want to enable large file support for
# some reason.  Should normally only be changed to maintain compatibility
# with an older release of perl.
#
USE_LARGE_FILES	*= define

#
# Uncomment this if you're building a 32-bit perl and want 64-bit integers.
# (If you're building a 64-bit perl then you will have 64-bit integers whether
# or not this is uncommented.)
# Note: This option is not supported in 32-bit MSVC60 builds.
#
#USE_64_BIT_INT	*= define

#
# Uncomment this if you want to support the use of long doubles in GCC builds.
# This option is not supported for MSVC builds.
#
#USE_LONG_DOUBLE *= define

#
# Uncomment this if you want to build perl with __USE_MINGW_ANSI_STDIO defined.
# (If you're building perl with USE_LONG_DOUBLE defined then
# __USE_MINGW_ANSI_STDIO will be defined whether or not this is uncommented.)
# This option is not supported for MSVC builds.
#
#USE_MINGW_ANSI_STDIO *= define

#
# Comment this out if you want the legacy default behavior of including '.' at
# the end of @INC.
#
DEFAULT_INC_EXCLUDES_DOT *= define

#
# Uncomment this if you want to disable looking up values from
# HKEY_CURRENT_USER\Software\Perl and HKEY_LOCAL_MACHINE\Software\Perl in
# the Registry.
#
#USE_NO_REGISTRY *= define

#
# uncomment exactly one of the following
#
# Visual C++ 6.0 (aka Visual C++ 98)
#CCTYPE		*= MSVC60
# Visual C++ .NET 2002/2003 (aka Visual C++ 7.0/7.1) (full version)
#CCTYPE		*= MSVC70
# Visual C++ Toolkit 2003 (aka Visual C++ 7.1) (free command-line tools)
#CCTYPE		*= MSVC70FREE
# Windows Server 2003 SP1 Platform SDK (April 2005) (64-bit compiler and tools)
#CCTYPE		= SDK2003SP1
# Visual C++ 2005 (aka Visual C++ 8.0) (full version or Express Edition)
#CCTYPE		*= MSVC80
# Visual C++ 2008 (aka Visual C++ 9.0) (full version or Express Edition)
#CCTYPE		*= MSVC90
# Visual C++ 2010 (aka Visual C++ 10.0) (full version or Express Edition)
#CCTYPE		= MSVC100
# Visual C++ 2012 (aka Visual C++ 11.0) (full version or Express Edition)
#CCTYPE		= MSVC110
# Visual C++ 2013 (aka Visual C++ 12.0) (full version or Express Edition)
#CCTYPE		= MSVC120
# Visual C++ 2015 (aka Visual C++ 14.0) (full version or Express Edition)
#CCTYPE		= MSVC140
# Visual C++ 2017 (aka Visual C++ 14.1) (full version or Community Edition)
#CCTYPE		= MSVC141
# Visual C++ 2019 (aka Visual C++ 14.2) (full version or Community Edition)
#CCTYPE		= MSVC142
# MinGW or mingw-w64 with gcc-3.4.5 or later
#CCTYPE		= GCC

#
# If you are using GCC, 4.3 or later by default we add the -fwrapv option.
# See https://rt.perl.org/Ticket/Display.html?id=121505
#
#GCCWRAPV       *= define

#
# If you are using Intel C++ Compiler uncomment this
#
#__ICC		*= define

#
# Uncomment this if you want to build everything in C++ mode
#
#USE_CPLUSPLUS	*= define

#
# uncomment next line if you want debug version of perl (big/slow)
# If not enabled, we automatically try to use maximum optimization
# with all compilers that are known to have a working optimizer.
#
# You can also set CFG = DebugSymbols for a slightly smaller/faster
# debug build without the special debugging code in perl which is
# enabled via -DDEBUGGING;
#
# or you can set CFG = DebugFull for an even fuller (bigger/slower)
# debug build using the debug version of the CRT, and enabling VC++
# debug features such as extra assertions and invalid parameter warnings
# in perl and CRT code via -D_DEBUG.  (Note that the invalid parameter
# handler does get triggered from time to time in this configuration,
# which causes warnings to be printed on STDERR, which in turn causes a
# few tests to fail.)  (This configuration is only available for VC++ builds.)
#
#CFG		*= Debug

#
# uncomment to enable linking with setargv.obj under the Visual C
# compiler. Setting this options enables perl to expand wildcards in
# arguments, but it may be harder to use alternate methods like
# File::DosGlob that are more powerful.  This option is supported only with
# Visual C.
#
#USE_SETARGV	*= define

#
# set this if you wish to use perl's malloc
# WARNING: Turning this on/off WILL break binary compatibility with extensions
# you may have compiled with/without it.  Be prepared to recompile all
# extensions if you change the default.  Currently, this cannot be enabled
# if you ask for USE_IMP_SYS above.
#
#PERL_MALLOC	*= define

#
# set this to enable debugging mstats
# This must be enabled to use the Devel::Peek::mstat() function.  This cannot
# be enabled without PERL_MALLOC as well.
#
#DEBUG_MSTATS	*= define

#
# set this to additionally provide a statically linked perl-static.exe.
# Note that dynamic loading will not work with this perl, so you must
# include required modules statically using the STATIC_EXT or ALL_STATIC
# variables below. A static library perl530s.lib will also be created.
# Ordinary perl.exe is not affected by this option.
#
#BUILD_STATIC	*= define

#
# in addition to BUILD_STATIC the option ALL_STATIC makes *every*
# extension get statically built.
# This will result in a very large perl executable, but the main purpose
# is to have proper linking set so as to be able to create miscellaneous
# executables with different built-in extensions. It implies BUILD_STATIC.
#
#ALL_STATIC	*= define

#
# set the install location of the compiler
# Running VCVARS32.BAT, VCVARSALL.BAT or similar is *required* when using
# Visual C++.
#
# For GCC builds this should be the directory containing the bin, include,
# lib directories for your compiler.
#

#CCHOME		*= C:\MinGW

#
# uncomment this if you are using x86_64-w64-mingw32 cross-compiler
# ie if your gcc executable is called 'x86_64-w64-mingw32-gcc'
# instead of the usual 'gcc'.
#
#GCCCROSS	*= define

#
# Additional compiler flags can be specified here.
#
BUILDOPT	*= $(BUILDOPTEXTRA)

#
# This should normally be disabled.  Enabling it will disable the File::Glob
# implementation of CORE::glob.
#
#BUILDOPT	+= -DPERL_EXTERNAL_GLOB

#
# Perl needs to read scripts in text mode so that the DATA filehandle
# works correctly with seek() and tell(), or around auto-flushes of
# all filehandles (e.g. by system(), backticks, fork(), etc).
#
# The current version on the ByteLoader module on CPAN however only
# works if scripts are read in binary mode.  But before you disable text
# mode script reading (and break some DATA filehandle functionality)
# please check first if an updated ByteLoader isn't available on CPAN.
#
BUILDOPT	+= -DPERL_TEXTMODE_SCRIPTS

#
# specify semicolon-separated list of extra directories that modules will
# look for libraries (spaces in path names need not be quoted)
#
EXTRALIBDIRS	*=

#
# set this to point to cmd.exe (only needed if you use some
# alternate shell that doesn't grok cmd.exe style commands)
#
#SHELL		*= g:\winnt\system32\cmd.exe

#
# set this to your email address (perl will guess a value from
# from your loginname and your hostname, which may not be right)
#
#EMAIL		*=

##
## Build configuration ends.
##

##################### CHANGE THESE ONLY IF YOU MUST #####################

PERL_MALLOC	*= undef
DEBUG_MSTATS	*= undef

USE_SITECUST	*= undef
USE_MULTI	*= undef
USE_ITHREADS	*= undef
USE_IMP_SYS	*= undef
USE_LARGE_FILES	*= undef
USE_64_BIT_INT	*= undef
USE_LONG_DOUBLE	*= undef
DEFAULT_INC_EXCLUDES_DOT *= undef
USE_NO_REGISTRY	*= undef


.IF "$(USE_IMP_SYS)" == "define"
PERL_MALLOC	= undef
.ENDIF

.IF "$(PERL_MALLOC)" == "undef"
DEBUG_MSTATS	= undef
.ENDIF

.IF "$(DEBUG_MSTATS)" == "define"
BUILDOPT	+= -DPERL_DEBUGGING_MSTATS
.ENDIF

.IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
USE_MULTI	!= define
.ENDIF

.IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
USE_MULTI	!= define
.ENDIF

.IF "$(USE_SITECUST)" == "define"
BUILDOPT	+= -DUSE_SITECUSTOMIZE
.ENDIF

.IF "$(USE_MULTI)" != "undef"
BUILDOPT	+= -DPERL_IMPLICIT_CONTEXT
.ENDIF

.IF "$(USE_IMP_SYS)" != "undef"
BUILDOPT	+= -DPERL_IMPLICIT_SYS
.ENDIF

.IF "$(USE_NO_REGISTRY)" != "undef"
BUILDOPT	+= -DWIN32_NO_REGISTRY
.ENDIF

.IF "$(CCTYPE)" == "GCC"
GCCTARGET	:= $(shell gcc -dumpmachine & exit /b 0)
.ENDIF

#no explicit CCTYPE given, do auto detection
.IF "$(CCTYPE)" == ""
GCCTARGET	:= $(shell gcc -dumpmachine 2>NUL & exit /b 0)
#do we have a GCC?
.IF "$(GCCTARGET)" != ""
CCTYPE		= GCC
.ELSE
WIN64		:= $(shell for /f "tokens=3 delims=.^ " \
	%i in ('cl ^2^>^&1') do @if "%i" == "32-bit" echo undef)
#major version of CL has diff position based on 32 vs 64
#Microsoft (R) C/C++ Optimizing Compiler Version 15.00.30729.01 for x64
#Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 15.00.30729.01 for 80x86
#use var to capture 1st line only, not 8th token of lines 2 & 3 in cl.exe output
.IF "$(WIN64)" == "undef"
MSVCVER		:= $(shell (set MSVCVER=) & (for /f "tokens=8,9 delims=.^ " \
	%i in ('cl ^2^>^&1') do @if not defined MSVCVER if %i% geq 19 \
	(set /A "MSVCVER=((%i-5)*10)+(%j/10)") \
	else (set /A "MSVCVER=(%i-6)*10")))
.ELSE
MSVCVER		:= $(shell (set MSVCVER=) & (for /f "tokens=7,8 delims=.^ " \
	%i in ('cl ^2^>^&1') do @if not defined MSVCVER if %i% geq 19 \
	(set /A "MSVCVER=((%i-5)*10)+(%j/10)") \
	else (set /A "MSVCVER=(%i-6)*10")))
.ENDIF
#autodetect failed, reset to empty string
.IF "$(MSVCVER)" == "-50"
CCTYPE		:= 
.ELSE
CCTYPE		:= MSVC$(MSVCVER)
.ENDIF
.ENDIF
.ENDIF

# Versions of Visual C++ up to VC++ 7.1 define $(MSVCDir); versions since then
# define $(VCINSTALLDIR) instead, but for VC++ 14.1 we need the subfolder given
# by $(VCToolsInstallDir).
.IF "$(CCHOME)" == ""
.IF "$(CCTYPE)" == "GCC"
CCHOME		*= C:\MinGW
.ELIF "$(CCTYPE)" == "MSVC60" || \
    "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE"
CCHOME		*= $(MSVCDir)
.ELIF "$(CCTYPE)" == "MSVC141" || "$(CCTYPE)" == "MSVC142"
CCHOME		*= $(VCToolsInstallDir)
.ELSE
CCHOME		*= $(VCINSTALLDIR)
.ENDIF
.ENDIF

PROCESSOR_ARCHITECTURE *= x86

.IF "$(WIN64)" == "undef"
PROCESSOR_ARCHITECTURE	= x86
.ENDIF

.IF "$(WIN64)" == ""
# When we are running from a 32bit cmd.exe on AMD64 then
# PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
# is set to AMD64
.IF "$(PROCESSOR_ARCHITEW6432)" != ""
PROCESSOR_ARCHITECTURE	!= $(PROCESSOR_ARCHITEW6432)
WIN64			= define
.ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
WIN64			= define
.ELSE
WIN64			= undef
.ENDIF
.ENDIF

.IF "$(WIN64)" == "define"
USE_64_BIT_INT	= define
.ENDIF

# Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because
# both link against MSVCRT.dll (which is part of Windows itself) and
# not against a compiler specific versioned runtime.
.IF "$(WIN64)" == "define" && "$(CCTYPE)" == "MSVC60"
CCTYPE		= SDK2003SP1
.ENDIF

# Disable the 64-bit-int option for (32-bit) MSVC60 builds since that compiler
# does not support it.
.IF "$(CCTYPE)" == "MSVC60"
USE_64_BIT_INT	!= undef
.ENDIF

# Disable the long double option for MSVC builds since that compiler
# does not support it.
.IF "$(CCTYPE)" != "GCC"
USE_LONG_DOUBLE	!= undef
.ENDIF

ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
.IF "$(ARCHITECTURE)" == "AMD64"
ARCHITECTURE	= x64
.ENDIF
.IF "$(ARCHITECTURE)" == "IA64"
ARCHITECTURE	= ia64
.ENDIF

.IF "$(USE_MULTI)" == "define"
ARCHNAME	= MSWin32-$(ARCHITECTURE)-multi
.ELSE
ARCHNAME	= MSWin32-$(ARCHITECTURE)-perlio
.ENDIF

.IF "$(USE_ITHREADS)" == "define"
ARCHNAME	!:= $(ARCHNAME)-thread
.ENDIF

.IF "$(WIN64)" != "define"
.IF "$(USE_64_BIT_INT)" == "define"
ARCHNAME	!:= $(ARCHNAME)-64int
.ENDIF
.ENDIF

.IF "$(USE_LONG_DOUBLE)" == "define"
ARCHNAME	!:= $(ARCHNAME)-ld
.ENDIF

# Set the install location of the compiler headers/libraries.
# These are saved into $Config{incpath} and $Config{libpth}.
.IF "$(GCCCROSS)" == "define"
CCINCDIR *= $(CCHOME)\x86_64-w64-mingw32\include
CCLIBDIR *= $(CCHOME)\x86_64-w64-mingw32\lib
.ELIF "$(CCTYPE)" == "GCC"
CCINCDIR *= $(CCHOME)\include
CCLIBDIR *= $(CCHOME)\lib
.ELSE
CCINCDIR *= $(CCHOME)\include
.IF "$(CCTYPE)" == "MSVC141" || "$(CCTYPE)" == "MSVC142"
.IF "$(WIN64)" == "define"
CCLIBDIR *= $(CCHOME)\lib\x64
.ELSE
CCLIBDIR *= $(CCHOME)\lib\x86
.ENDIF
.ELSE
.IF "$(WIN64)" == "define"
CCLIBDIR *= $(CCHOME)\lib\amd64
.ELSE
CCLIBDIR *= $(CCHOME)\lib
.ENDIF
.ENDIF
.ENDIF

# Set DLL location for GCC compilers.
.IF "$(CCTYPE)" == "GCC"
.IF "$(GCCCROSS)" == "define"
CCDLLDIR *= $(CCLIBDIR)
.ELSE
CCDLLDIR *= $(CCHOME)\bin
.ENDIF
.ENDIF

ARCHDIR		= ..\lib\$(ARCHNAME)
COREDIR		= ..\lib\CORE
AUTODIR		= ..\lib\auto
LIBDIR		= ..\lib
EXTDIR		= ..\ext
DISTDIR		= ..\dist
CPANDIR		= ..\cpan
PODDIR		= ..\pod
HTMLDIR		= .\html

INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin
INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)
INST_LIB	= $(INST_TOP)$(INST_VER)\lib
INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)
INST_COREDIR	= $(INST_ARCHLIB)\CORE
INST_HTML	= $(INST_TOP)$(INST_VER)\html

#
# Programs to compile, build .lib files and link
#

.USESHELL :

MINIBUILDOPT    *=

.IF "$(CCTYPE)" == "GCC"

.IF "$(GCCCROSS)" == "define"
ARCHPREFIX      = x86_64-w64-mingw32-
.ENDIF

CC		= $(ARCHPREFIX)gcc
LINK32		= $(ARCHPREFIX)g++
LIB32		= $(ARCHPREFIX)ar rc
IMPLIB		= $(ARCHPREFIX)dlltool
RSC		= $(ARCHPREFIX)windres

.IF "$(USE_LONG_DOUBLE)" == "define" || "$(USE_MINGW_ANSI_STDIO)" == "define"
BUILDOPT        += -D__USE_MINGW_ANSI_STDIO
MINIBUILDOPT    += -D__USE_MINGW_ANSI_STDIO
.ENDIF

GCCVER1:= $(shell for /f "delims=. tokens=1,2,3" %i in ('gcc -dumpversion') do @echo %i)
GCCVER2:= $(shell for /f "delims=. tokens=1,2,3" %i in ('gcc -dumpversion') do @echo %j)
GCCVER3:= $(shell for /f "delims=. tokens=1,2,3" %i in ('gcc -dumpversion') do @echo %k)

# If you are using GCC, 4.3 or later by default we add the -fwrapv option.
# See https://rt.perl.org/Ticket/Display.html?id=121505
#
GCCWRAPV *= $(shell if "$(GCCVER1)"=="4" (if "$(GCCVER2)" geq "3" echo define) else if "$(GCCVER1)" geq "5" (echo define))

.IF "$(GCCWRAPV)" == "define"
BUILDOPT        += -fwrapv
MINIBUILDOPT    += -fwrapv
.ENDIF

i = .i
o = .o
a = .a

#
# Options
#

INCLUDES	= -I.\include -I. -I..
DEFINES		= -DWIN32
.IF "$(WIN64)" == "define"
DEFINES		+= -DWIN64 -DCONSERVATIVE
.ENDIF
LOCDEFS		= -DPERLDLL -DPERL_CORE
CXX_FLAG	= -xc++

# Current releases of MinGW 5.1.4 (as of 11-Aug-2009) will fail to link
# correctly if -lmsvcrt is specified explicitly.
LIBC		=
#LIBC		= -lmsvcrt

# same libs as MSVC
LIBFILES	= $(LIBC) -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool \
	-lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 \
	-luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32

.IF  "$(CFG)" == "Debug"
OPTIMIZE	= -g -O2 -DDEBUGGING
LINK_DBG	= -g
.ELIF  "$(CFG)" == "DebugSymbols"
OPTIMIZE	= -g -O2
LINK_DBG	= -g
.ELSE
OPTIMIZE	= -s -O2
LINK_DBG	= -s
.ENDIF

EXTRACFLAGS	=
.IF "$(USE_CPLUSPLUS)" == "define"
EXTRACFLAGS	+= $(CXX_FLAG)
.ENDIF
CFLAGS		= $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
LINK_FLAGS	= $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
OBJOUT_FLAG	= -o
EXEOUT_FLAG	= -o
LIBOUT_FLAG	=
PDBOUT		=

BUILDOPT	+= -fno-strict-aliasing -mms-bitfields
MINIBUILDOPT	+= -fno-strict-aliasing

TESTPREPGCC	= test-prep-gcc

.ELSE

# All but the free version of VC++ 7.1 can load DLLs on demand.  Makes the test
# suite run in about 10% less time.
.IF "$(CCTYPE)" != "MSVC70FREE"
# If no registry, advapi32 is only used for Perl_pp_getlogin/getlogin/GetUserNameA
# which is rare to execute
.IF "$(USE_NO_REGISTRY)" != "undef"
DELAYLOAD	= -DELAYLOAD:ws2_32.dll -DELAYLOAD:advapi32.dll delayimp.lib
MINIDELAYLOAD	=
.ELSE
DELAYLOAD	= -DELAYLOAD:ws2_32.dll delayimp.lib
#miniperl never does any registry lookups
MINIDELAYLOAD	= -DELAYLOAD:advapi32.dll
.ENDIF
.ENDIF

# Visual C++ 2005 and 2008 (VC++ 8.0 and 9.0) create manifest files for EXEs and
# DLLs. These either need copying everywhere with the binaries, or else need
# embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
# simplicity, embed them if they exist (and delete them afterwards so that they
# don't get installed too).
EMBED_EXE_MANI	= if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
		  if exist $@.manifest del $@.manifest
EMBED_DLL_MANI	= if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
		  if exist $@.manifest del $@.manifest

# Most relevant compiler-specific options fall into two groups:
# either pre-MSVC80 or MSVC80 onwards, so define a macro for this.
.IF "$(CCTYPE)" == "MSVC60" || \
    "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE"
PREMSVC80	= define
.ELSE
PREMSVC80	= undef
.ENDIF

.IF "$(__ICC)" != "define"
CC		= cl
LINK32		= link
.ELSE
CC		= icl
LINK32		= xilink
.ENDIF
LIB32		= $(LINK32) -lib
RSC		= rc

#
# Options
#

INCLUDES	= -I.\include -I. -I..
#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX
DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT
LOCDEFS		= -DPERLDLL -DPERL_CORE
CXX_FLAG	= -TP -EHsc

.IF "$(CCTYPE)" == "MSVC140" || "$(CCTYPE)" == "MSVC141" || "$(CCTYPE)" == "MSVC142"
LIBC		= ucrt.lib
.ELSE
LIBC		= msvcrt.lib
.ENDIF

.IF  "$(CFG)" == "Debug"
OPTIMIZE	= -Od -MD -Zi -DDEBUGGING
LINK_DBG	= -debug
.ELIF  "$(CFG)" == "DebugSymbols"
OPTIMIZE	= -Od -MD -Zi
LINK_DBG	= -debug
.ELIF  "$(CFG)" == "DebugFull"
.IF "$(CCTYPE)" == "MSVC140" || "$(CCTYPE)" == "MSVC141" || "$(CCTYPE)" == "MSVC142"
LIBC		= ucrtd.lib
.ELSE
LIBC		= msvcrtd.lib
.ENDIF
OPTIMIZE	= -Od -MDd -Zi -D_DEBUG -DDEBUGGING
LINK_DBG	= -debug
.ELSE
# -O1 yields smaller code, which turns out to be faster than -O2 on x86 and x64
OPTIMIZE	= -O1 -MD -Zi -DNDEBUG
# we enable debug symbols in release builds also
LINK_DBG	= -debug -opt:ref,icf
# you may want to enable this if you want COFF symbols in the executables
# in addition to the PDB symbols.  The default Dr. Watson that ships with
# Windows can use the the former but not latter.  The free WinDbg can be
# installed to get better stack traces from just the PDB symbols, so we
# avoid the bloat of COFF symbols by default.
#LINK_DBG	= $(LINK_DBG) -debugtype:both
.IF "$(CCTYPE)" != "MSVC60"
# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
OPTIMIZE	+= -GL
LINK_DBG	+= -ltcg
LIB_FLAGS	= -ltcg
.ENDIF
.ENDIF

.IF "$(WIN64)" == "define"
DEFINES		+= -DWIN64 -DCONSERVATIVE
OPTIMIZE	+= -fp:precise
.ENDIF

# For now, silence warnings from VC++ 8.0 onwards about "unsafe" CRT functions
# and POSIX CRT function names being deprecated.
.IF "$(PREMSVC80)" == "undef"
DEFINES		+= -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
.ENDIF

# Likewise for deprecated Winsock APIs in VC++ 14.0 onwards for now.
.IF "$(CCTYPE)" == "MSVC140" || "$(CCTYPE)" == "MSVC141" || "$(CCTYPE)" == "MSVC142"
DEFINES		+= -D_WINSOCK_DEPRECATED_NO_WARNINGS
.ENDIF

# The Windows Server 2003 SP1 SDK compiler only defines _configthreadlocale() if
# _MT is defined, i.e. when using /MT (the LIBCMT.lib version of the CRT), which
# the perl build doesn't use. We therefore specify NO_THREAD_SAFE_LOCALE so that
# perl.h doesn't set USE_THREAD_SAFE_LOCALE, which it otherwise would do since
# _MSC_VER is 1400 for this compiler (as per MSVC80).
.IF "$(CCTYPE)" == "SDK2003SP1"
DEFINES		+= -DNO_THREAD_SAFE_LOCALE
.ENDIF

# In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to
# 64-bit, even in 32-bit mode.  It also provides the _USE_32BIT_TIME_T
# preprocessor option to revert back to the old functionality for
# backward compatibility.  We define this symbol here for older 32-bit
# compilers only (which aren't using it at all) for the sole purpose
# of getting it into $Config{ccflags}.  That way if someone builds
# Perl itself with e.g. VC6 but later installs an XS module using VC8
# the time_t types will still be compatible.
.IF "$(WIN64)" == "undef"
.IF "$(PREMSVC80)" == "define"
BUILDOPT	+= -D_USE_32BIT_TIME_T
.ENDIF
.ENDIF

LIBBASEFILES	= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
	comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
	netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib \
	odbc32.lib odbccp32.lib comctl32.lib

.IF "$(CCTYPE)" == "MSVC140" || "$(CCTYPE)" == "MSVC141" || "$(CCTYPE)" == "MSVC142"
.IF "$(CFG)" == "DebugFull"
LIBBASEFILES	+= msvcrtd.lib vcruntimed.lib
.ELSE
LIBBASEFILES	+= msvcrt.lib vcruntime.lib
.ENDIF
.ENDIF

# Avoid __intel_new_proc_init link error for libircmt.
# libmmd is /MD equivelent, other variants exist.
# libmmd is Intel C's math addon funcs to MS CRT, contains long doubles, C99,
# and optimized C89 funcs
.IF "$(__ICC)" == "define"
LIBBASEFILES	+= libircmt.lib libmmd.lib
.ENDIF

# The Windows Server 2003 SP1 SDK compiler links against MSVCRT.dll, which
# doesn't include the buffer overrun verification code used by the /GS switch.
# Since the code links against libraries that are compiled with /GS, this
# "security cookie verification" code must be included via bufferoverflow.lib.
.IF "$(CCTYPE)" == "SDK2003SP1"
LIBBASEFILES    += bufferoverflowU.lib
.ENDIF

LIBFILES	= $(LIBBASEFILES) $(LIBC)

EXTRACFLAGS	= -nologo -GF -W3
.IF "$(__ICC)" == "define"
EXTRACFLAGS	+= -Qstd=c99
.ENDIF
.IF "$(USE_CPLUSPLUS)" == "define"
EXTRACFLAGS	+= $(CXX_FLAG)
.ENDIF
CFLAGS		= $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
		$(PCHFLAGS) $(OPTIMIZE)
LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \
		-libpath:"$(INST_COREDIR)" \
		-machine:$(PROCESSOR_ARCHITECTURE)
LIB_FLAGS	+= -nologo
OBJOUT_FLAG	= -Fo
EXEOUT_FLAG	= -Fe
LIBOUT_FLAG	= /out:
PDBOUT		= -Fd$*.pdb
TESTPREPGCC	=

.ENDIF

CFLAGS_O	= $(CFLAGS) $(BUILDOPT)

.IF "$(PREMSVC80)" == "undef"
PRIV_LINK_FLAGS	+= "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
.ELSE
RSC_FLAGS	= -DINCLUDE_MANIFEST
.ENDIF

# VS 2017 (VC++ 14.1) requires at minimum Windows 7 SP1 (with latest Windows Updates)

# For XP support in >= VS 2013 (VC++ 12.0), subsystem is always in Config.pm
# LINK_FLAGS else subsystem is only needed for EXE building, not XS DLL building
# Console vs GUI makes no difference for DLLs, so use default for cleaner
# building cmd lines
.IF "$(CCTYPE)" == "MSVC120" || "$(CCTYPE)" == "MSVC140" || "$(CCTYPE)" == "MSVC141" || "$(CCTYPE)" == "MSVC142"
.IF "$(WIN64)" == "define"
LINK_FLAGS	+= -subsystem:console,"5.02"
.ELSE
LINK_FLAGS	+= -subsystem:console,"5.01"
.ENDIF

.ELIF "$(CCTYPE)" != "GCC"
PRIV_LINK_FLAGS	+= -subsystem:console
.ENDIF

BLINK_FLAGS	= $(PRIV_LINK_FLAGS) $(LINK_FLAGS)

#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############

# Some old dmakes (including Sarathy's one at
# http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip)
# don't support logical OR (||) or logical AND (&&) in conditional
# expressions and hence don't process this makefile correctly. Determine
# whether this is the case so that we can give the user an error message.
.IF 1 == 1 || 1 == 1
NEWDMAKE = define
.ELSE
NEWDMAKE = undef
.ENDIF

o *= .obj
a *= .lib

LKPRE		= INPUT (
LKPOST		= )

#
# Rules
#

.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res

.c$(o):
	$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $(PDBOUT) $<

.c.i:
	$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@

.y.c:
	$(NOOP)

$(o).dll:
.IF "$(CCTYPE)" == "GCC"
	$(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
	$(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
.ELSE
	$(LINK32) -dll -implib:$(*B).lib -def:$(*B).def \
	    -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
	$(EMBED_DLL_MANI)
.ENDIF

.rc.res:
.IF "$(CCTYPE)" == "GCC"
	$(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@
.ELSE
	$(RSC) -i.. -DINCLUDE_MANIFEST $<
.ENDIF

#
# various targets

#do not put $(MINIPERL) as a dep/prereq in a rule, instead put $(HAVEMINIPERL)
#$(MINIPERL) is not a buildable target, use "dmake mp" if you want to just build
#miniperl alone
MINIPERL	= ..\miniperl.exe
HAVEMINIPERL	= ..\lib\buildcustomize.pl
MINIDIR		= .\mini
PERLEXE		= ..\perl.exe
WPERLEXE	= ..\wperl.exe
PERLEXESTATIC	= ..\perl-static.exe
STATICDIR	= .\static.tmp
GLOBEXE		= ..\perlglob.exe
CONFIGPM	= ..\lib\Config.pm
GENUUDMAP	= ..\generate_uudmap.exe
.IF "$(BUILD_STATIC)" == "define" || "$(ALL_STATIC)" == "define"
PERLSTATIC	= static
.ELSE
PERLSTATIC	= 
.ENDIF

# Unicode data files generated by mktables
UNIDATAFILES	 = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \
		   ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
		   ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm            \
		   ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst

# Directories of Unicode data files generated by mktables
UNIDATADIR1	= ..\lib\unicore\To
UNIDATADIR2	= ..\lib\unicore\lib

PERLEXE_MANIFEST= .\perlexe.manifest
PERLEXE_ICO	= .\perlexe.ico
PERLEXE_RES	= .\perlexe.res
PERLDLL_RES	=

# Nominate a target which causes extensions to be re-built
# This used to be $(PERLEXE), but at worst it is the .dll that they depend
# on and really only the interface - i.e. the .def file used to export symbols
# from the .dll
PERLDEP = $(PERLIMPLIB)


PL2BAT		= bin\pl2bat.pl

UTILS		=			\
		..\utils\h2ph		\
		..\utils\splain		\
		..\utils\perlbug	\
		..\utils\pl2pm 		\
		..\utils\h2xs		\
		..\utils\perldoc	\
		..\utils\perlivp	\
		..\utils\libnetcfg	\
		..\utils\enc2xs		\
		..\utils\encguess	\
		..\utils\piconv		\
		..\utils\corelist	\
		..\utils\cpan		\
		..\utils\xsubpp		\
		..\utils\pod2html	\
		..\utils\prove		\
		..\utils\ptar		\
		..\utils\ptardiff	\
		..\utils\ptargrep	\
		..\utils\zipdetails	\
		..\utils\shasum		\
		..\utils\instmodsh	\
		..\utils\json_pp	\
		bin\exetype.pl		\
		bin\runperl.pl		\
		bin\pl2bat.pl		\
		bin\perlglob.pl		\
		bin\search.pl

.IF "$(CCTYPE)" == "GCC"

CFGSH_TMPL	= config.gc
CFGH_TMPL	= config_H.gc
PERLIMPLIB	= $(COREDIR)\libperl530$(a)
PERLSTATICLIB	= ..\libperl530s$(a)
INT64		= long long

.ELSE

CFGSH_TMPL	= config.vc
CFGH_TMPL	= config_H.vc
INT64		= __int64

.ENDIF

# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
PERLIMPLIB	*= $(COREDIR)\perl530$(a)
PERLEXPLIB	*= $(COREDIR)\perl530.exp
PERLSTATICLIB	*= ..\perl530s$(a)
PERLDLL		= ..\perl530.dll
PERLDLLBASE	= perl530.dll

#EUMM on Win32 isn't ready for parallel make, so only allow this file to be parallel
#$(MAKE) will contain the -P that this makefile was called with, which is bad for
#make_ext.pl since upto jobs*jobs processes will run instead of jobs
#also any recipie containing $(MAKE) is special cased by dmake to execute recipes
#containing $(MAKE) when "dmake -n" is executed, which causes recursive calls
#to dmake, which means "dmake -n" is then broken as a diagnostic tool since
#"dmake -n" will invoke all the make_ext.pl scripts build things instead of
#showing what to build since $(MAKE) is an arg to make_ext.pl, not an invocation
#of the dmake process
PLMAKE		= dmake

XCOPY		= xcopy /f /r /i /d /y
RCOPY		= xcopy /f /r /i /e /d /y
NOOP		= @rem

#first ones are arrange in compile time order for faster parallel building
#see #123867 for details
MICROCORE_SRC	=		\
		..\toke.c	\
		..\regcomp.c	\
		..\regexec.c	\
		..\op.c		\
		..\sv.c		\
		..\pp.c		\
		..\pp_ctl.c	\
		..\pp_sys.c	\
		..\pp_pack.c	\
		..\pp_hot.c	\
		..\gv.c		\
		..\perl.c	\
		..\utf8.c	\
		..\dump.c	\
		..\hv.c		\
		..\av.c		\
		..\caretx.c	\
		..\deb.c	\
		..\doio.c	\
		..\doop.c	\
		..\dquote.c	\
		..\globals.c	\
		..\mro_core.c	\
		..\locale.c	\
		..\keywords.c	\
		..\mathoms.c    \
		..\mg.c		\
		..\numeric.c	\
		..\pad.c	\
		..\perlapi.c	\
		..\perly.c	\
		..\pp_sort.c	\
		..\reentr.c	\
		..\run.c	\
		..\scope.c	\
		..\taint.c	\
		..\time64.c	\
		..\universal.c	\
		..\util.c

EXTRACORE_SRC	+= perllib.c

.IF "$(PERL_MALLOC)" == "define"
EXTRACORE_SRC	+= ..\malloc.c
.ENDIF

EXTRACORE_SRC	+= ..\perlio.c

WIN32_SRC	=		\
		.\win32.c	\
		.\win32io.c	\
		.\win32sck.c	\
		.\win32thread.c	\
		.\fcrypt.c

CORE_NOCFG_H	=		\
		..\av.h		\
		..\cop.h	\
		..\cv.h		\
		..\dosish.h	\
		..\embed.h	\
		..\form.h	\
		..\gv.h		\
		..\handy.h	\
		..\hv.h		\
		..\hv_func.h	\
		..\iperlsys.h	\
		..\mg.h		\
		..\nostdio.h	\
		..\op.h		\
		..\opcode.h	\
		..\perl.h	\
		..\perlapi.h	\
		..\perlsdio.h	\
		..\perly.h	\
		..\pp.h		\
		..\proto.h	\
		..\regcomp.h	\
		..\regexp.h	\
		..\scope.h	\
		..\sv.h		\
		..\thread.h	\
		..\unixish.h	\
		..\utf8.h	\
		..\util.h	\
		..\warnings.h	\
		..\XSUB.h	\
		..\EXTERN.h	\
		..\perlvars.h	\
		..\intrpvar.h	\
		.\include\dirent.h	\
		.\include\netdb.h	\
		.\include\sys\errno2.h	\
		.\include\sys\socket.h	\
		.\win32.h

CORE_H		= $(CORE_NOCFG_H) .\config.h ..\git_version.h

UUDMAP_H	= ..\uudmap.h
BITCOUNT_H	= ..\bitcount.h
MG_DATA_H	= ..\mg_data.h
GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)

HAVE_COREDIR	= .\.coreheaders

MICROCORE_OBJ	= $(MICROCORE_SRC:db:+$(o))
CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
WIN32_OBJ	= $(WIN32_SRC:db:+$(o))
MINICORE_OBJ	= $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
MINIWIN32_OBJ	= $(MINIDIR)\{$(WIN32_OBJ:f)}
MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)
DLL_OBJ		= $(DYNALOADER)

PERLDLL_OBJ	= $(CORE_OBJ)
PERLEXE_OBJ	= perlmain$(o)
PERLEXEST_OBJ	= perlmainst$(o)

PERLDLL_OBJ	+= $(WIN32_OBJ) $(DLL_OBJ)

.IF "$(USE_SETARGV)" != ""
SETARGV_OBJ	= setargv$(o)
.ENDIF

.IF "$(ALL_STATIC)" == "define"
# some exclusions, unfortunately, until fixed:
#  - MakeMaker isn't capable enough for SDBM_File (small bug)
STATIC_EXT	= * !SDBM_File
NORMALIZE_STATIC = Normalize_static
.ELSE
# specify static extensions here, for example:
# (be sure to include Win32CORE to load Win32 on demand)
#STATIC_EXT	= Win32CORE Cwd Compress/Raw/Zlib
STATIC_EXT	= Win32CORE
NORMALIZE_DYN	= Normalize_dyn
.ENDIF

DYNALOADER	= ..\DynaLoader$(o)

# vars must be separated by "\t+~\t+", since we're using the tempfile
# version of config_sh.pl (we were overflowing someone's buffer by
# trying to fit them all on the command line)
#	-- BKS 10-17-1999
CFG_VARS	=					\
		INST_TOP=$(INST_TOP)	~	\
		INST_VER=$(INST_VER)	~	\
		INST_ARCH=$(INST_ARCH)		~	\
		archname=$(ARCHNAME)		~	\
		cc=$(CC)			~	\
		ld=$(LINK32)			~	\
		ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT)	~	\
		usecplusplus=$(USE_CPLUSPLUS)	~	\
		cf_email=$(EMAIL)		~	\
		d_mymalloc=$(PERL_MALLOC)	~	\
		libs=$(LIBFILES:f)		~	\
		incpath=$(CCINCDIR)	~	\
		libperl=$(PERLIMPLIB:f)		~	\
		libpth=$(CCLIBDIR);$(EXTRALIBDIRS)	~	\
		libc=$(LIBC)			~	\
		make=$(PLMAKE)			~	\
		_o=$(o)				~	\
		obj_ext=$(o)			~	\
		_a=$(a)				~	\
		lib_ext=$(a)			~	\
		static_ext=$(STATIC_EXT)	~	\
		usethreads=$(USE_ITHREADS)	~	\
		useithreads=$(USE_ITHREADS)	~	\
		usemultiplicity=$(USE_MULTI)	~	\
		use64bitint=$(USE_64_BIT_INT)	~	\
		uselongdouble=$(USE_LONG_DOUBLE)	~	\
		uselargefiles=$(USE_LARGE_FILES)	~	\
		usesitecustomize=$(USE_SITECUST)	~	\
		default_inc_excludes_dot=$(DEFAULT_INC_EXCLUDES_DOT)	~	\
		LINK_FLAGS=$(LINK_FLAGS)	~	\
		optimize=$(OPTIMIZE)	~	\
		ARCHPREFIX=$(ARCHPREFIX)	~	\
		WIN64=$(WIN64)

#
# Top targets
#

all : CHECKDMAKE rebasePE Extensions_nonxs $(PERLSTATIC)

info :
.IF "$(CCTYPE)" == "GCC"
	@echo # CCTYPE=$(CCTYPE)&& \
	echo # CC=$(CC)&& \
	echo # GCCVER=$(GCCVER1).$(GCCVER2).$(GCCVER3)&& \
	echo # GCCTARGET=$(GCCTARGET)&& \
	echo # GCCCROSS=$(GCCCROSS)&& \
	echo # WIN64=$(WIN64)&& \
	echo # ARCHITECTURE=$(ARCHITECTURE)&& \
	echo # ARCHNAME=$(ARCHNAME)&& \
	echo # MAKE=$(PLMAKE)
.ELSE
	@echo # CCTYPE=$(CCTYPE)&& \
	echo # WIN64=$(WIN64)&& \
	echo # ARCHITECTURE=$(ARCHITECTURE)&& \
	echo # ARCHNAME=$(ARCHNAME)&& \
	echo # MAKE=$(PLMAKE)
.ENDIF
.IF "$(CCTYPE)" == ""
	@echo Unable to detect gcc and/or architecture!
	@exit 1
.ENDIF


..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h

..\regexec$(o) : ..\regnodes.h ..\regcharclass.h

reonly : ..\regnodes.h $(UNIDATAFILES) Extensions_reonly

static: $(PERLEXESTATIC)

#----------------------------------------------------------------

CHECKDMAKE :
.IF "$(NEWDMAKE)" == "define"
	$(NOOP)
.ELSE
	@echo Your dmake doesn't support ^|^| or ^&^& in conditional expressions.
	@echo Please get the latest dmake from http://search.cpan.org/dist/dmake/
	@exit 1
.ENDIF

$(GLOBEXE) : perlglob.c
.IF "$(CCTYPE)" == "GCC"
	$(LINK32) $(OPTIMIZE) $(BLINK_FLAGS) -mconsole -o $@ perlglob.c $(LIBFILES)
.ELSE
	$(CC) $(OPTIMIZE) $(PDBOUT) -Fe$@ perlglob.c -link $(BLINK_FLAGS) \
	setargv$(o) $(LIBFILES) && $(EMBED_EXE_MANI)
.ENDIF

..\git_version.h : $(HAVEMINIPERL) ..\make_patchnum.pl
	$(MINIPERL) -I..\lib ..\make_patchnum.pl

# make sure that we recompile perl.c if the git version changes
..\perl$(o) : ..\git_version.h

..\config.sh : $(CFGSH_TMPL) config_sh.PL FindExt.pm $(HAVEMINIPERL)
	$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
	    $(mktmp $(CFG_VARS)) $(CFGSH_TMPL) > ..\config.sh

# This target is for when changes to the main config.sh happen.
# Edit config.gc, then make perl using GCC in a minimal configuration (i.e.
# with MULTI, ITHREADS, IMP_SYS and LARGE_FILES off), then make
# this target to regenerate config_H.gc.
regen_config_h:
	$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
	    $(CFGSH_TMPL) > ..\config.sh
	$(MINIPERL) -I..\lib ..\configpm --chdir=..
	-del /f $(CFGH_TMPL)
	-$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)"
	rename config.h $(CFGH_TMPL)

$(CONFIGPM) .\config.h .UPDATEALL: ..\config.sh config_h.PL
	$(MINIPERL) -I..\lib ..\configpm --chdir=..
	-$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)"

# See the comment in Makefile.SH explaining this seemingly cranky ordering
..\lib\buildcustomize.pl : $(MINI_OBJ) ..\write_buildcustomize.pl
.IF "$(CCTYPE)" == "GCC"
	$(LINK32) -v -mconsole -o $(MINIPERL) $(BLINK_FLAGS) \
	    $(mktmp $(LKPRE) $(MINI_OBJ) $(LIBFILES) $(LKPOST))
.ELSE
	$(LINK32) -out:$(MINIPERL) $(BLINK_FLAGS) \
	    @$(mktmp $(DELAYLOAD) $(MINIDELAYLOAD) $(LIBFILES) $(MINI_OBJ))
	$(EMBED_EXE_MANI:s/$@/$(MINIPERL)/)
.ENDIF
	$(MINIPERL) -I..\lib -f ..\write_buildcustomize.pl ..

#convinence target, get a working miniperl
mp : $(CONFIGPM)

$(MINIDIR)\.exists : $(CFGH_TMPL)
	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
#
# Copy the template config.h and set configurables at the end of it
# as per the options chosen and compiler used.
# Note: This config.h is only used to build miniperl.exe anyway, but
# it's as well to have its options correct to be sure that it builds
# and so that it's "-V" options are correct for use by makedef.pl. The
# real config.h used to build perl.exe is generated from the top-level
# config_h.SH by config_h.PL (run by miniperl.exe).
#
# MINIDIR generates config.h so miniperl.exe is not rebuilt when the 2nd
# config.h is generated in CONFIGPM target, see also the comments for $(MINI_OBJ).
	copy $(CFGH_TMPL) config.h
	@(echo.&& \
	echo #ifndef _config_h_footer_&& \
	echo #define _config_h_footer_&& \
	echo #undef Off_t&& \
	echo #undef LSEEKSIZE&& \
	echo #undef Off_t_size&& \
	echo #undef PTRSIZE&& \
	echo #undef SSize_t&& \
	echo #undef HAS_ATOLL&& \
	echo #undef HAS_STRTOLL&& \
	echo #undef HAS_STRTOULL&& \
	echo #undef Size_t_size&& \
	echo #undef IVTYPE&& \
	echo #undef UVTYPE&& \
	echo #undef IVSIZE&& \
	echo #undef UVSIZE&& \
	echo #undef NV_PRESERVES_UV&& \
	echo #undef NV_PRESERVES_UV_BITS&& \
	echo #undef IVdf&& \
	echo #undef UVuf&& \
	echo #undef UVof&& \
	echo #undef UVxf&& \
	echo #undef UVXf&& \
	echo #undef USE_64_BIT_INT&& \
	echo #undef Gconvert&& \
	echo #undef HAS_FREXPL&& \
	echo #undef HAS_ISNANL&& \
	echo #undef HAS_MODFL&& \
	echo #undef HAS_MODFL_PROTO&& \
	echo #undef HAS_SQRTL&& \
	echo #undef HAS_STRTOLD&& \
	echo #undef PERL_PRIfldbl&& \
	echo #undef PERL_PRIgldbl&& \
	echo #undef PERL_PRIeldbl&& \
	echo #undef PERL_SCNfldbl&& \
	echo #undef NVTYPE&& \
	echo #undef NVSIZE&& \
	echo #undef LONG_DOUBLESIZE&& \
	echo #undef NV_OVERFLOWS_INTEGERS_AT&& \
	echo #undef NVef&& \
	echo #undef NVff&& \
	echo #undef NVgf&& \
	echo #undef USE_LONG_DOUBLE&& \
	echo #undef USE_CPLUSPLUS)>> config.h
.IF "$(CCTYPE)" == "MSVC140" || "$(CCTYPE)" == "MSVC141" || "$(CCTYPE)" == "MSVC142"
	@(echo #undef FILE_ptr&& \
	echo #undef FILE_cnt&& \
	echo #undef FILE_base&& \
	echo #undef FILE_bufsiz&& \
	echo #define FILE_ptr^(fp^) PERLIO_FILE_ptr^(fp^)&& \
	echo #define FILE_cnt^(fp^) PERLIO_FILE_cnt^(fp^)&& \
	echo #define FILE_base^(fp^) PERLIO_FILE_base^(fp^)&& \
	echo #define FILE_bufsiz^(fp^) ^(PERLIO_FILE_cnt^(fp^) + PERLIO_FILE_ptr^(fp^) - PERLIO_FILE_base^(fp^)^)&& \
	echo #define I_STDBOOL)>> config.h
.ENDIF
.IF "$(USE_LARGE_FILES)"=="define"
	@(echo #define Off_t $(INT64)&& \
	echo #define LSEEKSIZE ^8&& \
	echo #define Off_t_size ^8)>> config.h
.ELSE
	@(echo #define Off_t long&& \
	echo #define LSEEKSIZE ^4&& \
	echo #define Off_t_size ^4)>> config.h
.ENDIF
.IF "$(WIN64)"=="define"
.IF "$(CCTYPE)" == "GCC"
	@(echo #define LONG_DOUBLESIZE ^16)>> config.h
.ELSE
	@(echo #define LONG_DOUBLESIZE ^8)>> config.h
.ENDIF
	@(echo #define PTRSIZE ^8&& \
	echo #define SSize_t $(INT64)&& \
	echo #define HAS_ATOLL&& \
	echo #define HAS_STRTOLL&& \
	echo #define HAS_STRTOULL&& \
	echo #define Size_t_size ^8)>> config.h
.ELSE
.IF "$(CCTYPE)" == "GCC"
	@(echo #define LONG_DOUBLESIZE ^12)>> config.h
.ELSE
	@(echo #define LONG_DOUBLESIZE ^8)>> config.h
.ENDIF
	@(echo #define PTRSIZE ^4&& \
	echo #define SSize_t int&& \
	echo #undef HAS_ATOLL&& \
	echo #undef HAS_STRTOLL&& \
	echo #undef HAS_STRTOULL&& \
	echo #define Size_t_size ^4)>> config.h
.ENDIF
.IF "$(USE_64_BIT_INT)"=="define"
	@(echo #define IVTYPE $(INT64)&& \
	echo #define UVTYPE unsigned $(INT64)&& \
	echo #define IVSIZE ^8&& \
	echo #define UVSIZE ^8)>> config.h
.IF "$(USE_LONG_DOUBLE)"=="define"
	@(echo #define NV_PRESERVES_UV&& \
	echo #define NV_PRESERVES_UV_BITS 64)>> config.h
.ELSE
	@(echo #undef NV_PRESERVES_UV&& \
	echo #define NV_PRESERVES_UV_BITS 53)>> config.h
.ENDIF
	@(echo #define IVdf "I64d"&& \
	echo #define UVuf "I64u"&& \
	echo #define UVof "I64o"&& \
	echo #define UVxf "I64x"&& \
	echo #define UVXf "I64X"&& \
	echo #define USE_64_BIT_INT)>> config.h
.ELSE
	@(echo #define IVTYPE long&& \
	echo #define UVTYPE unsigned long&& \
	echo #define IVSIZE ^4&& \
	echo #define UVSIZE ^4&& \
	echo #define NV_PRESERVES_UV&& \
	echo #define NV_PRESERVES_UV_BITS 32&& \
	echo #define IVdf "ld"&& \
	echo #define UVuf "lu"&& \
	echo #define UVof "lo"&& \
	echo #define UVxf "lx"&& \
	echo #define UVXf "lX"&& \
	echo #undef USE_64_BIT_INT)>> config.h
.ENDIF
.IF "$(USE_LONG_DOUBLE)"=="define"
	@(echo #define Gconvert^(x,n,t,b^) sprintf^(^(b^),"%.*""Lg",^(n^),^(x^)^)&& \
	echo #define HAS_FREXPL&& \
	echo #define HAS_ISNANL&& \
	echo #define HAS_MODFL&& \
	echo #define HAS_MODFL_PROTO&& \
	echo #define HAS_SQRTL&& \
	echo #define HAS_STRTOLD&& \
	echo #define PERL_PRIfldbl "Lf"&& \
	echo #define PERL_PRIgldbl "Lg"&& \
	echo #define PERL_PRIeldbl "Le"&& \
	echo #define PERL_SCNfldbl "Lf"&& \
	echo #define NVTYPE long double&& \
	echo #define NVSIZE LONG_DOUBLESIZE&& \
	echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0&& \
	echo #define NVef "Le"&& \
	echo #define NVff "Lf"&& \
	echo #define NVgf "Lg"&& \
	echo #define USE_LONG_DOUBLE)>> config.h
.ELSE
	@(echo #define Gconvert^(x,n,t,b^) sprintf^(^(b^),"%.*g",^(n^),^(x^)^)&& \
	echo #undef HAS_FREXPL&& \
	echo #undef HAS_ISNANL&& \
	echo #undef HAS_MODFL&& \
	echo #undef HAS_MODFL_PROTO&& \
	echo #undef HAS_SQRTL&& \
	echo #undef HAS_STRTOLD&& \
	echo #undef PERL_PRIfldbl&& \
	echo #undef PERL_PRIgldbl&& \
	echo #undef PERL_PRIeldbl&& \
	echo #undef PERL_SCNfldbl&& \
	echo #define NVTYPE double&& \
	echo #define NVSIZE ^8&& \
	echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0&& \
	echo #define NVef "e"&& \
	echo #define NVff "f"&& \
	echo #define NVgf "g"&& \
	echo #undef USE_LONG_DOUBLE)>> config.h
.ENDIF
.IF "$(USE_CPLUSPLUS)"=="define"
	@(echo #define USE_CPLUSPLUS&& \
	echo #endif)>> config.h
.ELSE
	@(echo #undef USE_CPLUSPLUS&& \
	echo #endif)>> config.h
.ENDIF
#separate line since this is sentinal that this target is done
	@rem. > $(MINIDIR)\.exists

$(MINICORE_OBJ) : $(CORE_NOCFG_H)
	$(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(PDBOUT) ..\$(*B).c

$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
	$(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(PDBOUT) $(*B).c

# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
# unless the .IF is true), so instead we use a .ELSE with the default.
# This is the only file that depends on perlhost.h, vmem.h, and vdir.h

perllib$(o)	: perllib.c perllibst.h .\perlhost.h .\vdir.h .\vmem.h
.IF "$(USE_IMP_SYS)" == "define"
	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ $(PDBOUT) perllib.c
.ELSE
	$(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ $(PDBOUT) perllib.c
.ENDIF

# 1. we don't want to rebuild miniperl.exe when config.h changes
# 2. we don't want to rebuild miniperl.exe with non-default config.h
# 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
$(MINI_OBJ)	: $(MINIDIR)\.exists $(CORE_NOCFG_H)

$(WIN32_OBJ)	: $(CORE_H)

$(CORE_OBJ)	: $(CORE_H)

$(DLL_OBJ)	: $(CORE_H)


perllibst.h : $(HAVEMINIPERL) $(CONFIGPM) create_perllibst_h.pl
	$(MINIPERL) -I..\lib create_perllibst_h.pl

perldll.def : $(HAVEMINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl
	$(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
	$(BUILDOPT) CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def

$(PERLEXPLIB) $(PERLIMPLIB) .UPDATEALL : perldll.def
.IF "$(CCTYPE)" == "GCC"
	$(IMPLIB) -k -d perldll.def -D $(PERLDLLBASE) -l $(PERLIMPLIB) -e $(PERLEXPLIB)
.ELSE #VC family
	lib -def:perldll.def -machine:$(ARCHITECTURE) /OUT:$(PERLIMPLIB)
.ENDIF

$(PERLDLL): $(PERLEXPLIB) $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
.IF "$(CCTYPE)" == "GCC"
	$(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
	   $(PERLDLL_OBJ) $(shell @type Extensions_static) $(LIBFILES) $(PERLEXPLIB)
.ELSE
	$(LINK32) -dll -out:$@ $(BLINK_FLAGS) \
	    @Extensions_static \
	    @$(mktmp -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \
		$(PERLDLL_RES) $(PERLDLL_OBJ) $(PERLEXPLIB))
	$(EMBED_DLL_MANI)
.ENDIF

$(PERLSTATICLIB): $(PERLDLL_OBJ) Extensions_static
.IF "$(CCTYPE)" == "GCC"
	$(LIB32) $(LIB_FLAGS) $@ $(PERLDLL_OBJ)
	if exist $(STATICDIR) rmdir /s /q $(STATICDIR)
	for %i in ($(shell @type Extensions_static)) do \
		@mkdir $(STATICDIR) && cd $(STATICDIR) && \
		$(ARCHPREFIX)ar x ..\%i && \
		$(ARCHPREFIX)ar q ..\$@ *$(o) && \
		cd .. && rmdir /s /q $(STATICDIR)
.ELSE
	$(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
	    @$(mktmp $(PERLDLL_OBJ))
.ENDIF
	$(XCOPY) $(PERLSTATICLIB) $(COREDIR)\$(NULL)

$(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)

$(MINIDIR)\globals$(o) : $(GENERATED_HEADERS)

$(GENUUDMAP) $(GENERATED_HEADERS) .UPDATEALL : ..\mg_raw.h
.IF "$(CCTYPE)" == "GCC"
	$(LINK32) $(CFLAGS_O) -o..\generate_uudmap.exe ..\generate_uudmap.c \
	$(BLINK_FLAGS) -x $(mktmp $(LKPRE) $(LIBFILES) $(LKPOST))
.ELSE
	$(CC) $(CFLAGS_O) $(PDBOUT) -Fe..\generate_uudmap.exe ..\generate_uudmap.c @$(mktmp -link $(LIBFILES)) -link $(BLINK_FLAGS)
	$(EMBED_EXE_MANI:s/$@/..\generate_uudmap.exe/)
.ENDIF
	$(GENUUDMAP) $(GENERATED_HEADERS)

MakePPPort : $(HAVEMINIPERL) $(CONFIGPM)
	$(MINIPERL) -I..\lib ..\mkppport

# also known as $(HAVE_COREDIR)
.\.coreheaders : $(CORE_H)
	$(XCOPY) *.h $(COREDIR)\*.* && $(RCOPY) include $(COREDIR)\*.* && $(XCOPY) ..\*.h $(COREDIR)\*.*
	rem. > $@

perlmain$(o) : runperl.c $(CONFIGPM)
	$(CC) $(CFLAGS_O:s,-DPERLDLL,-UPERLDLL,) $(OBJOUT_FLAG)$@ $(PDBOUT) -c runperl.c

perlmainst$(o) : runperl.c $(CONFIGPM)
	$(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $(PDBOUT) -c runperl.c

$(PERLEXE): $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB)
.IF "$(CCTYPE)" == "GCC"
	$(LINK32) -mconsole -o $@ $(BLINK_FLAGS)  \
	    $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
.ELSE
	$(LINK32) -out:$@ $(BLINK_FLAGS) \
	    $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES) $(SETARGV_OBJ)
	$(EMBED_EXE_MANI)
.ENDIF
	copy $(PERLEXE) $(WPERLEXE)
	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS

$(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
.IF "$(CCTYPE)" == "GCC"
	$(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
	    $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES)
.ELSE
	$(LINK32) -out:$@ $(BLINK_FLAGS) \
	    $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES) $(SETARGV_OBJ)
	$(EMBED_EXE_MANI)
.ENDIF

#-------------------------------------------------------------------------------
# There's no direct way to mark a dependency on
# DynaLoader.pm, so this will have to do

#most of deps of this target are in DYNALOADER and therefore omitted here
Extensions : $(PERLDEP) $(DYNALOADER) Extension_lib $(GLOBEXE) MakePPPort
	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic !Unicode/Normalize

Normalize_static : $(CONFIGPM) $(GLOBEXE) $(HAVE_COREDIR) $(UNIDATAFILES)
	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static +Unicode/Normalize

Normalize_dyn : $(PERLDEP) $(DYNALOADER) $(GLOBEXE) $(UNIDATAFILES)
	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +Unicode/Normalize

Extensions_reonly : $(PERLDEP) $(DYNALOADER)
	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re

Exts_static_general : ..\make_ext.pl $(CONFIGPM) Extension_lib $(GLOBEXE) $(HAVE_COREDIR) MakePPPort
	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static !Unicode/Normalize

Extensions_static : list_static_libs.pl Exts_static_general $(NORMALIZE_STATIC)
	$(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static

Extensions_nonxs : ..\make_ext.pl ..\pod\perlfunc.pod $(CONFIGPM) $(GLOBEXE)
	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs !libs

Extension_lib : ..\make_ext.pl $(CONFIGPM)
	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) lib

#lib must be built, it can't be buildcustomize.pl-ed, and is required for XS building
$(DYNALOADER) : ..\make_ext.pl $(CONFIGPM) $(HAVE_COREDIR)
	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(EXTDIR) --dir=$(DISTDIR) --dynaloader

Extensions_clean :
	-if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean

Extensions_realclean :
	-if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean

# all PE files need to be built by the time this target runs, PP files can still
# be running in parallel like UNIDATAFILES, this target a placeholder for the
# future
.IF "$(PERLSTATIC)"=="static"
rebasePE : Extensions $(PERLDLL) $(PERLEXE) $(PERLEXESTATIC)
.ELSE
rebasePE : Extensions $(PERLDLL) $(NORMALIZE_DYN) $(PERLEXE)
.ENDIF
	$(NOOP)

#-------------------------------------------------------------------------------


doc: $(PERLEXE) $(PERLDLL) ..\pod\perltoc.pod
	$(PERLEXE) ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
	    --podpath=pod:lib:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
	    --recurse

..\utils\Makefile: $(CONFIGPM) ..\utils\Makefile.PL
	$(MINIPERL) -I..\lib ..\utils\Makefile.PL ..

# Note that this next section is parsed (and regenerated) by pod/buildtoc
# so please check that script before making structural changes here
utils: $(HAVEMINIPERL) ..\utils\Makefile
	cd ..\utils && $(PLMAKE) PERL=$(MINIPERL)
	copy ..\README.aix      ..\pod\perlaix.pod
	copy ..\README.amiga    ..\pod\perlamiga.pod
	copy ..\README.android  ..\pod\perlandroid.pod
	copy ..\README.bs2000   ..\pod\perlbs2000.pod
	copy ..\README.ce       ..\pod\perlce.pod
	copy ..\README.cn       ..\pod\perlcn.pod
	copy ..\README.cygwin   ..\pod\perlcygwin.pod
	copy ..\README.dos      ..\pod\perldos.pod
	copy ..\README.freebsd  ..\pod\perlfreebsd.pod
	copy ..\README.haiku    ..\pod\perlhaiku.pod
	copy ..\README.hpux     ..\pod\perlhpux.pod
	copy ..\README.hurd     ..\pod\perlhurd.pod
	copy ..\README.irix     ..\pod\perlirix.pod
	copy ..\README.jp       ..\pod\perljp.pod
	copy ..\README.ko       ..\pod\perlko.pod
	copy ..\README.linux    ..\pod\perllinux.pod
	copy ..\README.macos    ..\pod\perlmacos.pod
	copy ..\README.macosx   ..\pod\perlmacosx.pod
	copy ..\README.netware  ..\pod\perlnetware.pod
	copy ..\README.openbsd  ..\pod\perlopenbsd.pod
	copy ..\README.os2      ..\pod\perlos2.pod
	copy ..\README.os390    ..\pod\perlos390.pod
	copy ..\README.os400    ..\pod\perlos400.pod
	copy ..\README.plan9    ..\pod\perlplan9.pod
	copy ..\README.qnx      ..\pod\perlqnx.pod
	copy ..\README.riscos   ..\pod\perlriscos.pod
	copy ..\README.solaris  ..\pod\perlsolaris.pod
	copy ..\README.symbian  ..\pod\perlsymbian.pod
	copy ..\README.synology ..\pod\perlsynology.pod
	copy ..\README.tru64    ..\pod\perltru64.pod
	copy ..\README.tw       ..\pod\perltw.pod
	copy ..\README.vos      ..\pod\perlvos.pod
	copy ..\README.win32    ..\pod\perlwin32.pod
	copy ..\pod\perldelta.pod ..\pod\perl5300delta.pod
	$(MINIPERL) -I..\lib $(PL2BAT) $(UTILS)
	$(MINIPERL) -I..\lib ..\autodoc.pl ..
	$(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q ..

..\pod\perltoc.pod: $(PERLEXE) $(PERLDLL) Extensions Extensions_nonxs $(NORMALIZE_DYN) utils
	$(PERLEXE) -f ..\pod\buildtoc -q

# Note that the pod cleanup in this next section is parsed (and regenerated
# by pod/buildtoc so please check that script before making changes here

distclean: realclean
	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
		$(PERLIMPLIB) ..\miniperl$(a) $(PERLEXESTATIC) $(PERLSTATICLIB)
	-del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
	-del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
	-del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
	-del /f $(LIBDIR)\File\Glob.pm
	-del /f $(LIBDIR)\Sys\Hostname.pm
	-del /f $(LIBDIR)\Time\HiRes.pm
	-del /f $(LIBDIR)\Unicode\Normalize.pm
	-del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
	-del /f $(LIBDIR)\Storable.pm
	-del /f $(LIBDIR)\Win32.pm
	-del /f $(LIBDIR)\Win32CORE.pm
	-del /f $(LIBDIR)\Win32API\File.pm
	-del /f $(LIBDIR)\Win32API\File\cFile.pc
	-del /f $(LIBDIR)\buildcustomize.pl
	-del /f $(DISTDIR)\XSLoader\XSLoader.pm
	-del /f *.def *.map
	-if exist $(LIBDIR)\Amiga rmdir /s /q $(LIBDIR)\Amiga
	-if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
	-if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
	-if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
	-if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
	-if exist $(LIBDIR)\Carp rmdir /s /q $(LIBDIR)\Carp
	-if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
	-if exist $(LIBDIR)\Config\Perl rmdir /s /q $(LIBDIR)\Config\Perl
	-if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
	-if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
	-if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
	-if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
	-if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
	-if exist $(LIBDIR)\Exporter rmdir /s /q $(LIBDIR)\Exporter
	-if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
	-if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
	-if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
	-if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
	-if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
	-if exist $(LIBDIR)\ExtUtils\ParseXS rmdir /s /q $(LIBDIR)\ExtUtils\ParseXS
	-if exist $(LIBDIR)\ExtUtils\Typemaps rmdir /s /q $(LIBDIR)\ExtUtils\Typemaps
	-if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
	-if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
	-if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
	-if exist $(LIBDIR)\HTTP rmdir /s /q $(LIBDIR)\HTTP
	-if exist $(LIBDIR)\I18N rmdir /s /q $(LIBDIR)\I18N
	-if exist $(LIBDIR)\inc rmdir /s /q $(LIBDIR)\inc
	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
	-if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
	-if exist $(LIBDIR)\JSON rmdir /s /q $(LIBDIR)\JSON
	-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
	-if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
	-if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
	-if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
	-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
	-if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
	-if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
	-if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
	-if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
	-if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl
	-if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
	-if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
	-if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
	-if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
	-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
	-if exist $(LIBDIR)\Search rmdir /s /q $(LIBDIR)\Search
	-if exist $(LIBDIR)\Sub rmdir /s /q $(LIBDIR)\Sub
	-if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
	-if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
	-if exist $(LIBDIR)\Term rmdir /s /q $(LIBDIR)\Term
	-if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
	-if exist $(LIBDIR)\Test2 rmdir /s /q $(LIBDIR)\Test2
	-if exist $(LIBDIR)\Text rmdir /s /q $(LIBDIR)\Text
	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
	-if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
	-if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash
	-if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
	-if exist $(LIBDIR)\Unicode\Collate\Locale rmdir /s /q $(LIBDIR)\Unicode\Collate\Locale
	-if exist $(LIBDIR)\version rmdir /s /q $(LIBDIR)\version
	-if exist $(LIBDIR)\VMS rmdir /s /q $(LIBDIR)\VMS
	-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
	-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
	-cd $(PODDIR) && del /f *.html *.bat roffitall \
	    perl5300delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
	    perlapi.pod perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
	    perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
	    perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
	    perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \
	    perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
	    perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
	    perlsolaris.pod perlsymbian.pod perlsynology.pod perltoc.pod \
	    perltru64.pod perltw.pod perluniprops.pod perlvos.pod \
	    perlwin32.pod
	-cd ..\utils && del /f h2ph splain perlbug pl2pm h2xs \
	    perldoc perlivp libnetcfg enc2xs encguess piconv cpan *.bat \
	    xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep shasum corelist zipdetails
	-del /f ..\config.sh perlmain.c dlutils.c config.h.new \
	    perlmainst.c
	-del /f $(CONFIGPM)
	-del /f ..\lib\Config_git.pl
	-del /f bin\*.bat
	-del /f perllibst.h
	-del /f $(PERLEXE_RES) perl.base
	-cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h
	-cd $(EXTDIR) && del /s *.def Makefile Makefile.old
	-cd $(DISTDIR) && del /s *.def Makefile Makefile.old
	-cd $(CPANDIR) && del /s *.def Makefile Makefile.old
	-del /s ..\utils\Makefile
	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
	-if exist $(COREDIR) rmdir /s /q $(COREDIR)
	-if exist pod2htmd.tmp del pod2htmd.tmp
	-if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
	-del /f ..\t\test_state

install : all installbare installhtml

installbare : utils ..\pod\perltoc.pod
	$(PERLEXE) ..\installperl
	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
	if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
	if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*

installhtml : doc
	$(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*

inst_lib : $(CONFIGPM)
	$(RCOPY) ..\lib $(INST_LIB)\*.*

$(UNIDATAFILES) ..\pod\perluniprops.pod .UPDATEALL : ..\lib\unicore\mktables $(CONFIGPM)
	$(MINIPERL) -I..\lib ..\lib\unicore\mktables -C ..\lib\unicore -P ..\pod -maketest -makelist -p

minitest : .\config.h $(HAVEMINIPERL) ..\git_version.h $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) $(TESTPREPGCC)
	$(XCOPY) $(MINIPERL) ..\t\$(NULL)
	if exist ..\t\perl.exe del /f ..\t\perl.exe
	rename ..\t\miniperl.exe perl.exe
	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
# Note this perl.exe is miniperl
	cd ..\t && perl.exe TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t opbasic/*.t op/*.t uni/*.t perf/*.t pragma/*.t

test-prep : all utils ..\pod\perltoc.pod $(TESTPREPGCC)
	$(XCOPY) $(PERLEXE) ..\t\$(NULL) && $(XCOPY) $(PERLDLL) ..\t\$(NULL) \
	&& $(XCOPY) $(GLOBEXE) ..\t\$(NULL)

# If building with gcc versions 4.x.x or greater, then
# the GCC helper DLL will also need copied to the test directory.
# The name of the dll can change, depending upon which vendor has supplied
# your compiler, and upon the values of "x".
# libstdc++-6.dll is copied if it exists as it, too, may then be needed.
# Without this copying, the op/taint.t test script will fail.

.IF "$(CCTYPE)" == "GCC"

test-prep-gcc :
	if exist $(CCDLLDIR)\libgcc_s_seh-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_seh-1.dll ..\t\$(NULL)
	if exist $(CCDLLDIR)\libgcc_s_sjlj-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_sjlj-1.dll ..\t\$(NULL)
	if exist $(CCDLLDIR)\libgcc_s_dw2-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_dw2-1.dll ..\t\$(NULL)
	if exist $(CCDLLDIR)\libstdc++-6.dll $(XCOPY) $(CCDLLDIR)\libstdc++-6.dll ..\t\$(NULL)
	if exist $(CCDLLDIR)\libwinpthread-1.dll $(XCOPY) $(CCDLLDIR)\libwinpthread-1.dll ..\t\$(NULL)

.ENDIF

test : test-prep
	set PERL_STATIC_EXT=$(STATIC_EXT) && \
	    cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)

test_porting : test-prep
	set PERL_STATIC_EXT=$(STATIC_EXT) && \
	    cd ..\t && perl.exe harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t

test-reonly : reonly utils
	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
	cd ..\t && perl.exe harness $(OPT) -re \bpat\\/ $(EXTRA)

regen :
	cd .. && regen.pl

test-notty : test-prep
	set PERL_STATIC_EXT=$(STATIC_EXT) && \
	    set PERL_SKIP_TTY_TEST=1 && \
	    cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)

_test :
	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
	set PERL_STATIC_EXT=$(STATIC_EXT) && \
	    cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)

_clean :
	-@erase miniperlmain$(o)
	-@erase $(MINIPERL)
	-@erase perlglob$(o)
	-@erase perlmain$(o)
	-@erase perlmainst$(o)
	-@erase /f config.h
	-@erase /f ..\git_version.h
	-@erase $(GLOBEXE)
	-@erase $(PERLEXE)
	-@erase $(WPERLEXE)
	-@erase $(PERLEXESTATIC)
	-@erase $(PERLSTATICLIB)
	-@erase $(PERLDLL)
	-@erase $(CORE_OBJ)
	-@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS)
	-@erase .coreheaders
	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
	-if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
	-if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
	-@erase $(UNIDATAFILES)
	-@erase $(WIN32_OBJ)
	-@erase $(DLL_OBJ)
	-@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
	-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
	-@erase *.ilk
	-@erase *.pdb ..\*.pdb
	-@erase Extensions_static

clean : Extensions_clean _clean

realclean : Extensions_realclean _clean

# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
# Please *don't* use this unless all tests pass.
# If you want to report test failures, use "dmake nok" instead.
ok: utils $(PERLEXE) $(PERLDLL) Extensions_nonxs Extensions
	$(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)"

okfile: utils $(PERLEXE) $(PERLDLL) Extensions_nonxs Extensions
	$(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok

nok: utils $(PERLEXE) $(PERLDLL) Extensions_nonxs Extensions
	$(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)"

nokfile: utils $(PERLEXE) $(PERLDLL) Extensions_nonxs Extensions
	$(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok