diff --git a/README.md b/README.md index 56fdfdfca..e72d59946 100644 --- a/README.md +++ b/README.md @@ -1,12 +1,14 @@ Infection Monkey ==================== -Datacenter Security Tool +### Data center Security Testing Tool ------------------------ -### http://www.guardicore.com/the-infected-chaos-monkey/ +Welcome to the Infection Monkey! -The Infection Monkey is a security tool which tests your Data Center's ability to withstand perimeter breaches and internal server infection. It uses various methods to propagate through a data center, and reports its success to a centralized C&C server. +The Infection Monkey is an open source security tool for testing a data center's resiliency to perimeter breaches and internal server infection. The Monkey uses various methods to self propagate across a data center and reports success to a centralized C&C server. To read more about the Monkey, visit https://www.guardicore.com/infectionmonkey/ + +### http://www.guardicore.com/the-infected-chaos-monkey/ Features include: @@ -32,52 +34,52 @@ The Monkey itself has been tested on Windows XP, 7, 8.1 and 10. The Linux build ### Installation -For off the shelf use, download our pre-compiled binaries from our website, to setup the C&C server follow the instructions in [Monkey Island readme](monkey_island/readme.txt). If you with to compile the binaries yourself, follow the build instructions later on in this readme. +For off-the-shelf use, download our pre-compiled binaries from our website. To set up the C&C server follow the instructions on [Monkey Island readme](monkey_island/readme.txt). If you wish to compile the binaries yourself, follow the instructions under Building the Monkey from Source. ### Initial configuration. -Whether by downloading or building from source, the Infection Monkey is basically 4 executable files for different platforms and a default configuration file. +Whether you're downloading or building the Monkey from source, the Infection Monkey is comprised of 4 executable files for different platforms plus a default configuration file. Monkey configuration is stored in two places: -1. By default, the monkey uses a local configuration file (usually, config.bin). This configuration file must include the address of the Monkey's C&C server. +1. By default, the Monkey uses a local configuration file (usually, config.bin). This configuration file must include the address of the Monkey's C&C server. 2. After successfully connecting to the C&C server, the monkey downloads a new configuration from the server and discards the local configuration. It is possible to change the default configuration from the C&C server's UI. -In both cases the command server hostname should be modified to point at your local instance of the Monkey Island (note this doesn't require connectivity right off the bat). In addition, to improve the Monkey's chances of spreading, you can pre-seed it with credentials and usernames commonly used. +In both cases the command server hostname should be modified to point to your local instance of the Monkey Island (note that this doesn't require connectivity right off the bat). In addition, to improve the Monkey's chances of spreading, you can pre-seed it with credentials and usernames commonly used. Both configuration options use a JSON format for specifying options; see "Options" below for details. ### Running the C&C Server -Running the C&C Server is as simple as installing our infected monkey debian package on a specific server. The initial infected machine doesn not require a direct link to this server. +To run the C&C Server, install our infected Monkey debian package on a specific server. The initial infected machine doesn't require a direct link to this server. ### Unleashing the Monkey -Once configured, run the monkey using ```./monkey-linux-64 m0nk3y -c config.bin -s 41.50.73.31:5000``` (Windows is identical). This can be done at multiple points in the network at once. +Once configured, run the monkey using ```./monkey-linux-64 m0nk3y -c config.bin -s 41.50.73.31:5000``` (Windows is identical). This can be done at multiple points in the network simultaneously. Command line options include: * `-c`, `--config`: set configuration file. JSON file with configuration values, will override compiled configuration. * `-p`, `--parent`: set monkey’s parent uuid, allows better recognition of exploited monkeys in c&c -* `-t`, `--tunnel`: ip:port, set default tunnel for monkey when connecting to c&c. -* `-d`, `--depth` : sets the monkeys current operation depth. +* `-t`, `--tunnel`: ip:port, set default tunnel for Monkey when connecting to c&c. +* `-d`, `--depth` : sets the Monkey's current operation depth. -Monkey Modus Operandi +How the Monkey works --------------------- -1. Wakeup connection to c&c, sends basic info of the current machine and the configuration the monkey uses to the c&c. +1. Wakeup connection to c&c, sends basic info of the current machine and the configuration the monkey uses to the c&c. 1. First try direct connection to c&c. 2. If direct connection fails, try connection through a tunnel, a tunnel is found according to specified parameter (the default tunnel) or by sending a multicast query and waiting for another monkey to answer. 3. If no connection can be made to c&c, continue without it. 2. If a firewall app is running on the machine (supports Windows Firewall for Win XP and Windows Advanced Firewall for Win 7+), try to add a rule to allow all our traffic. -3. Startup of tunnel for other monkeys (if connection to c&c works). - 1. firewall is checked to allow listening sockets (if we failed to add a rule to windows firewall for example, the tunnel will not be created) - 2. will answer multicast requests from other monkeys in search of a tunnel. +3. Startup of tunnel for other Monkeys (if connection to c&c works). + 1. Firewall is checked to allow listening sockets (if we failed to add a rule to Windows firewall for example, the tunnel will not be created) + 2. Will answer multicast requests from other Monkeys in search of a tunnel. 4. Running exploitation sessions, will run x sessions according to configuration: 1. Connect to c&c and get the latest configuration 2. Scan ip ranges according to configuration. - 3. Try fingerprinting each host that answer, using the classes defined in the configuration (SMBFinger, SSHFinger, etc) + 3. Try fingerprinting each host that answers, using the classes defined in the configuration (SMBFinger, SSHFinger, etc) 4. Try exploitation on each host found, for each exploit class in configuration: 1. check exploit class supports target host (can be disabled by configuration) - 2. each exploitation class will use the data acquired in fingerprinting, or during the exploit, to find the suitable monkey executable for the host from the c&c. + 2. each exploitation class will use the data acquired in fingerprinting, or during the exploit, to find the suitable Monkey executable for the host from the c&c. 1. If c&c connection fails, and the source monkey’s executable is suitable, we use it. 2. If a suitable executable isn’t found, exploitation will fail. 3. Executables are cached in memory. @@ -129,7 +131,7 @@ ssh_passwords | list of strings | list of passwords to use when trying to exploi Building the Monkey from source ------------------------------- -If you want to build the monkey from source and not use our provided packages, look at the readme files under [chaos_monkey](chaos_monkey) and [monkey_island](monkey_island). +If you want to build the monkey from source instead of using our provided packages, follow the instructions at the readme files under [chaos_monkey](chaos_monkey) and [monkey_island](monkey_island). License diff --git a/chaos_monkey/config.py b/chaos_monkey/config.py index 76ed1480b..659fade3d 100644 --- a/chaos_monkey/config.py +++ b/chaos_monkey/config.py @@ -51,6 +51,8 @@ class Configuration(object): continue if key in ["name", "id", "current_server"]: continue + if self._depth_from_commandline and key=="depth": + continue try: default_value = getattr(Configuration, key) except AttributeError: @@ -83,6 +85,8 @@ class Configuration(object): return result + _depth_from_commandline = False + ########################### # logging config ########################### diff --git a/chaos_monkey/control.py b/chaos_monkey/control.py index d262a78ee..f8f3e3ee0 100644 --- a/chaos_monkey/control.py +++ b/chaos_monkey/control.py @@ -22,7 +22,7 @@ class ControlClient(object): proxies = {} @staticmethod - def wakeup(parent=None, default_tunnel=None): + def wakeup(parent=None, default_tunnel=None, has_internet_access=None): LOG.debug("Trying to wake up with C&C servers list: %r" % WormConfiguration.command_servers) if parent or default_tunnel: LOG.debug("parent: %s, default_tunnel: %s" % (parent, default_tunnel)) @@ -30,6 +30,9 @@ class ControlClient(object): if not parent: parent = GUID + if has_internet_access is None: + has_internet_access = check_internet_access(WormConfiguration.internet_services) + for server in WormConfiguration.command_servers: try: WormConfiguration.current_server = server @@ -38,7 +41,7 @@ class ControlClient(object): 'hostname': hostname, 'ip_addresses': local_ips(), 'description': " ".join(platform.uname()), - 'internet_access': check_internet_access(WormConfiguration.internet_services), + 'internet_access': has_internet_access, 'config': WormConfiguration.as_dict(), 'parent': parent} @@ -69,7 +72,7 @@ class ControlClient(object): proxy_address, proxy_port = proxy_find LOG.info("Found tunnel at %s:%s" % (proxy_address, proxy_port)) ControlClient.proxies['https'] = 'https://%s:%s' % (proxy_address, proxy_port) - ControlClient.wakeup(parent=parent) + ControlClient.wakeup(parent=parent, has_internet_access=has_internet_access) else: LOG.info("No tunnel found") diff --git a/chaos_monkey/example.conf b/chaos_monkey/example.conf index 14fb05ee0..6fc61261f 100644 --- a/chaos_monkey/example.conf +++ b/chaos_monkey/example.conf @@ -1,9 +1,8 @@ { "command_servers": [ - "russian-mail-brides.com:5000", "41.50.73.31:5000" ], - "internet_services": = [ + "internet_services": [ "monkey.guardicore.com", "www.google.com" ], @@ -29,15 +28,18 @@ ], "alive": true, "collect_system_info": true, - "local_network_scan": true, + "depth": 2, + "dropper_date_reference_path": "/bin/sh", "dropper_log_path_windows": "%temp%\\~df1562.tmp", "dropper_log_path_linux": "/tmp/user-1562", "dropper_set_date": true, "dropper_target_path": "C:\\Windows\\monkey.exe", "dropper_target_path_linux": "/bin/monkey", - "kill_path_linux": "/var/run/monkey.not", - "kill_path_windows": "%windir%\monkey.not", + + + "kill_file_path_linux": "/var/run/monkey.not", + "kill_file_path_windows": "%windir%\monkey.not", "dropper_try_move_first": false, "exploiter_classes": [ "SSHExploiter", @@ -63,7 +65,7 @@ "rdp_use_vbs_download": true, "retry_failed_explotation": true, "scanner_class": "TcpScanner", - "self_delete_in_cleanup": false, + "self_delete_in_cleanup": true, "serialize_config": false, "singleton_mutex_name": "{2384ec59-0df8-4ab9-918c-843740924a28}", "skip_exploit_if_file_exist": true, diff --git a/chaos_monkey/monkey.py b/chaos_monkey/monkey.py index 482211b81..c7c3824a4 100644 --- a/chaos_monkey/monkey.py +++ b/chaos_monkey/monkey.py @@ -52,6 +52,7 @@ class ChaosMonkey(object): self._default_server = opts.server if opts.depth: WormConfiguration.depth = int(opts.depth) + WormConfiguration._depth_from_commandline = True self._keep_running = True self._network = NetworkScanner() self._dropper_path = sys.argv[0] diff --git a/monkey_island/cc/admin/ui/index.html b/monkey_island/cc/admin/ui/index.html index 2392e988b..c39a1072b 100644 --- a/monkey_island/cc/admin/ui/index.html +++ b/monkey_island/cc/admin/ui/index.html @@ -59,7 +59,7 @@
- Telemetries + Telemetry Feed
@@ -193,10 +193,14 @@
- Stop Test + Test Management
+