The original problem was that when filtering two levels up in
inheritance chain, Django optimized the join generation so that the
middle model was skipped. But then Django generated joins from top
to middle to bottom for SELECT clause, and thus there was one extra
join (top->middle->bottom + top -> bottom).
This case is fixed in master as the filtering optimization is gone.
This has the side effect that in some cases there is still extra join
if the SELECT clause doesn't contain anything from middle or bottom.
Model.save() will use UPDATE - if not updated - INSERT instead of
SELECT - if found UPDATE else INSERT. This should save a query when
updating, but will cost a little when inserting model with PK set.
Also fixed#17341 -- made sure .save() commits transactions only after
the whole model has been saved. This wasn't the case in model
inheritance situations.
The save_base implementation was refactored into multiple methods.
A typical chain for inherited save is:
save_base()
_save_parents(self)
for each parent:
_save_parents(parent)
_save_table(parent)
_save_table(self)
Thanks Anssi for haggling until I implemented this.
This change alleviates the need for atomic_if_autocommit. When
autocommit is disabled for a database, atomic will simply create and
release savepoints, and not commit anything. This honors the contract of
not doing any transaction management.
This change also makes the hack to allow using atomic within the legacy
transaction management redundant.
None of the above will work with SQLite, because of a flaw in the design
of the sqlite3 library. This is a known limitation that cannot be lifted
without unacceptable side effects eg. triggering arbitrary commits.
The sql/query.py add_q method did a lot of where/having tree hacking to
get complex queries to work correctly. The logic was refactored so that
it should be simpler to understand. The new logic should also produce
leaner WHERE conditions.
The changes cascade somewhat, as some other parts of Django (like
add_filter() and WhereNode) expect boolean trees in certain format or
they fail to work. So to fix the add_q() one must fix utils/tree.py,
some things in add_filter(), WhereNode and so on.
This commit also fixed add_filter to see negate clauses up the path.
A query like .exclude(Q(reversefk__in=a_list)) didn't work similarly to
.filter(~Q(reversefk__in=a_list)). The reason for this is that only
the immediate parent negate clauses were seen by add_filter, and thus a
tree like AND: (NOT AND: (AND: condition)) will not be handled
correctly, as there is one intermediary AND node in the tree. The
example tree is generated by .exclude(~Q(reversefk__in=a_list)).
Still, aggregation lost connectors in OR cases, and F() objects and
aggregates in same filter clause caused GROUP BY problems on some
databases.
Fixed#17600, fixed#13198, fixed#17025, fixed#17000, fixed#11293.
Before there was need to have both .relabel_aliases() and .clone() for
many structs. Now there is only relabeled_clone() for those structs
where alias is the only mutable attribute.
Replaced them with per-database options, for proper multi-db support.
Also toned down the recommendation to tie transactions to HTTP requests.
Thanks Jeremy for sharing his experience.
Since "unless managed" now means "if database-level autocommit",
committing or rolling back doesn't have any effect.
Restored transactional integrity in a few places that relied on
automatically-started transactions with a transitory API.
For users who didn't activate autocommit in their database options, this
is backwards-incompatible in "non-managed" aka "auto" transaction state.
This state now uses database-level autocommit instead of ORM-level
autocommit.
Also removed the uses_autocommit feature which lost its purpose.
Autocommit cannot be manipulated independently from an open connection.
This commit introduces a minor change in behavior: entering transaction
management forces opening a databasse connection. This shouldn't be
backwards incompatible in any practical use case.
enter_transaction_management() was nearly always followed by managed().
In three places it wasn't, but they will all be refactored eventually.
The "forced" keyword argument avoids introducing behavior changes until
then.
This is mostly backwards-compatible, except, of course, for managed
itself. There's a minor difference in _enter_transaction_management:
the top self.transaction_state now contains the new 'managed' state
rather than the previous one. Django doesn't access
self.transaction_state in _enter_transaction_management.
There were a couple of errors in ._dirty flag handling:
* It started as None, but was never reset to None.
* The _dirty flag was sometimes used to indicate if the connection
was inside transaction management, but this was not done
consistently. This also meant the flag had three separate values.
* The None value had a special meaning, causing for example inability
to commit() on new connection unless enter/leave tx management was
done.
* The _dirty was tracking "connection in transaction" state, but only
in managed transactions.
* Some tests never reset the transaction state of the used connection.
* And some additional less important changes.
This commit has some potential for regressions, but as the above list
shows, the current situation isn't perfect either.
Fixes#19584.
This implies stop storing file path command line arguments in envvars as
a security measure to start relying on with Popen's shell=False instead,
and addition of an 'utils' module.
Thanks kmichel_wgs for the report.
If Django was symlinked into site-packages the previous approach to discover
the tests subdirectory would fail. The revised version now always points to
the location of the source and not the import path.
The content of ifchanged template tag was rendered twice: first time, to
compare it with the previous value and the second time, to return the
rendered output.
Previously, the ifchanged node stored state on `self._last_seen`,
thereby giving undesired results when the node is reused by another
thread at the same time (e.g. globally caching a Template object).
Thanks to akaihola for the report and Diederik van der Boor and
Bas Peschier for the patch.
Changed the ip_address field for Comment to GenericIPAddressField. Added
instructions to the release notes on how to update the schema of existing
databases.
Change patch from https://code.djangoproject.com/ticket/5568
to work on modern Django.
Add special case for MySQL which has different syntax for DROP INDEX.
Add unit tests for the new functionality.
When iteration over a queryset raised an exception, the result cache
remained initialized with an empty list, so subsequent iterations returned
an empty list instead of raising an exception
Querying the reverse side of nullable to_field relation, where both
sides can contain null values resulted in incorrect results. The reason
was not detecting '' as NULL.
Refs #17541
There was a regression in case two models inherited the same parent,
and one contained a foreign key to other. When select_related travelled
the foreign key the other model reused the parent join made by the
first model. This was likely caused by Query.join_parent_model()
addition in commit 68985db482.
Thanks to Trac alias loic84 for report & tests.
The admin_widgets tests were issuing click() to the browser but
didn't wait for the effects of those clicks. This caused the resulting
request to be processed concurrently with the test case. When using
in-memory SQLite this caused weird failures.
Also added wait_page_loaded() to admin selenium tests for code
reuse.
Fixed#19856
The join promote=True was over-aggressive in select_related handling.
After that was removed, the only other user was query.combine(). That
use case is very easy to handle locally, so there is no more need for
the join(promote=True) flag.
Refs #19849.
This controls whether or not a database level cosntraint is created. This is useful in a few specialized circumstances, but in general should not be used!
The refactoring mainly concentrates on making sure the inner and outer
query agree about the split position. The split position is where the
multijoin happens, and thus the split position also determines the
columns used in the "WHERE col1 IN (SELECT col2 from ...)" condition.
This commit fixes a regression caused by #10790 and commit
69597e5bcc. The regression was caused
by wrong cols in the split position.
Django used to check the version of MySQL before handling the first
request, which required:
- opening a connection
- closing it, to avoid holding it idle until the first request.
This code isn't necessary any longer since Django dropped support for
some versions of MySQL, and other database backends don't implement a
similar dance. For consistency and maintenability, remove it.
Reverts 4423757c0c.
Closes#18135.
* Avoided calling BaseHttpResponse.close(). The test client take care of
that since acc5396e.
* Disconnected the request_finished signal when this method must be
called. The test client has a similar implementation since bacb097a.
Thanks Carl Meyer for the review.
Squashed commit of the following:
commit 4f290bdb60
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Wed Feb 13 21:21:30 2013 +0100
Used '0:00' instead of 'UTC' which doesn't always exist in Oracle.
Thanks Ian Kelly for the suggestion.
commit 01b6366f3c
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Wed Feb 13 13:38:43 2013 +0100
Made tzname a parameter of datetime_extract/trunc_sql.
This is required to work around a bug in Oracle.
commit 924a144ef8
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Wed Feb 13 14:47:44 2013 +0100
Added support for parameters in SELECT clauses.
commit b4351d2890
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Mon Feb 11 22:30:22 2013 +0100
Documented backwards incompatibilities in the two previous commits.
commit 91ef84713c
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Mon Feb 11 09:42:31 2013 +0100
Used QuerySet.datetimes for the admin's date_hierarchy.
commit 0d0de288a5
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Mon Feb 11 09:29:38 2013 +0100
Used QuerySet.datetimes in date-based generic views.
commit 9c0859ff7c
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 21:43:25 2013 +0100
Implemented QuerySet.datetimes on Oracle.
commit 68ab511a4f
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 21:43:14 2013 +0100
Implemented QuerySet.datetimes on MySQL.
commit 22d52681d3
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 21:42:29 2013 +0100
Implemented QuerySet.datetimes on SQLite.
commit f6800fd04c
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 21:43:03 2013 +0100
Implemented QuerySet.datetimes on PostgreSQL.
commit 0c829c23f4
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 21:41:08 2013 +0100
Added datetime-handling infrastructure in the ORM layers.
commit 104d82a777
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Mon Feb 11 10:05:55 2013 +0100
Updated null_queries tests to avoid clashing with the __second lookup.
commit c01bbb3235
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 23:07:41 2013 +0100
Updated tests of .dates().
Replaced .dates() by .datetimes() for DateTimeFields.
Replaced dates with datetimes in the expected output for DateFields.
commit 50fb7a5246
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 21:40:09 2013 +0100
Updated and added tests for QuerySet.datetimes.
commit a8451a5004
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 22:34:46 2013 +0100
Documented the new time lookups and updated the date lookups.
commit 29413eab2b
Author: Aymeric Augustin <aymeric.augustin@m4x.org>
Date: Sun Feb 10 16:15:49 2013 +0100
Documented QuerySet.datetimes and updated QuerySet.dates.
For languages with non-breaking space as thousand separator,
standard space input should also be allowed, as few people know
how to enter non-breaking space on keyboards. Refs #17217.
Thanks Alexey Boriskin for the report and initial patch.
Wrap the Parser.compile_filter method call with a try/except and call the
newly added Parser.compile_filter_error(). Overwrite this method in the
DebugParser to throw the correct error.
Since this error was otherwise catched by the compile_function try/except
block the debugger highlighted the wrong line.
The reason was that the except clause needed to remove a connection
from the django.db.connections dict, but other parts of Django do not
expect this to happen. In addition the except clause was silently
swallowing the exception messages.
Refs #19707, special thanks to Carl Meyer for pointing out that this
approach should be taken.
When a query had a complex where condition (a condition targeting more
than the base table) a subquery was used for deletion. However, the
query had default ordering from the model's meta and Oracle doesn't
work with ordered subqueries.
The regression was caused by fast-path deletion code introduced in
1cd6e04cd4 for fixing #18676.
Thanks to Dylan Klomparens for the report.
Also, according to the comments on the ticket and its duplicates, added
tests execising saving an instance of a model with a GFK to:
* An unsaved object -- This actually doesn't generate the same failure
but another ORM-level exception. The test verifies it's the case.
* An instance of a model with a __nonzero__() method thant returns False
for it. This doesn't fail because that code path isn't executed.
* An instance of a model with a CharField PK and an empty value for it.
This doesn't fail.
They are handled independently now and the latter can be influenced by
the new BaseCommand.leave_locale_alone internal option.
Thanks chrischambers for the report, Claude, lpiatek, neaf and gabooo for
their work on a patch, originally on refs. #17379.
They are simply ignored now. This allows for a more correct behavior when
they are placed before translatable constructs on the same line.
Previously, the latter were wrongly ignored because the former were
preserved when converting template code to the internal Python-syntax
form later fed to xgettext but Python has no ``/* ... */``-style
comments.
Also, special comments directed to translators are now only taken in
account when they are located at the end of a line. e.g.::
{# Translators: ignored #}{% trans "Literal A" %}{# Translators: valid, associated with "Literal B" below #}
{% trans "Literal B" %}
Behavior of ``{% comment %}...{% endcomment %}``tags remains unchanged.
Thanks juneih at redpill-linpro dot com for the report and Claude for
his work on the issue.
The main cleanup was removal of non-necessary __unicode__ method. The
tests didn't break on py3 as the string representation was never used
in the tests.
Refs #17813. Thanks to Simon Charette for spotting this issue.
Thanks a lot to everybody participating in developing this feature.
The patch was developed by multiple people, at least Trac aliases
tonnzor, jimmysong, Fandekasp and slurms.
Stylistic changes added by committer.
It creates a `locale/django.pot` file once instead of one
`locale/<locale_code>/django.pot` file for every locale involved.
Thanks Michal Čihař for the report and patch.
Anssi Kääriäinen
Aymeric Augustin
Claude Paroz
Florian Apolloner
Jacob Kaplan-Moss
Baptiste Mispelon
Ramiro Morales
Loic Bistuer
Alex Gaynor
Igor Támara
Preston Holmes
Juan Pedro Fisanotti
Javier Mansilla
matiasb
Simon Charette
Łukasz Langa
Carl Meyer
Florian Hahn
Julien Phalip
Christopher Medrela
Diederik van der Boor
Zbigniew Siciarz
Tomek Paczkowski
Erik Romijn
Bas Peschier
Wiktor Kolodziej
Honza Král
Tomasz Rybak
George Song
Marcin Biernat
Aleksandra Sendecka
Klaas van Schelven
Grzegorz Nosek
Konrad Hałas
Lennart Regebro
Vladimir A Filonov
Michael van Tellingen
Hiroki Kiyohara
Nick Sandford
Alexey Boriskin
Matt Robenolt
Tim Graham
Craig Blaszczyk