Preparing release version 4.1.0

CHANGELOG.rst

@@ -18,6 +18,232 @@ with advance notice in the **Deprecations** section of releases.
 
 .. towncrier release notes start
 
+pytest 4.1.0 (2019-01-05)
+=========================
+
+Removals
+--------
+
+- `#2169 <https://github.com/pytest-dev/pytest/issues/2169>`_: ``pytest.mark.parametrize``: in previous versions, errors raised by id functions were suppressed and changed into warnings. Now the exceptions are propagated, along with a pytest message informing the node, parameter value and index where the exception occurred.
+
+
+- `#3078 <https://github.com/pytest-dev/pytest/issues/3078>`_: Remove legacy internal warnings system: ``config.warn``, ``Node.warn``. The ``pytest_logwarning`` now issues a warning when implemented.
+
+  See our `docs <https://docs.pytest.org/en/latest/deprecations.html#config-warn-and-node-warn>`__ on information on how to update your code.
+
+
+- `#3079 <https://github.com/pytest-dev/pytest/issues/3079>`_: Removed support for yield tests - they are fundamentally broken because they don't support fixtures properly since collection and test execution were separated.
+
+  See our `docs <https://docs.pytest.org/en/latest/deprecations.html#yield-tests>`__ on information on how to update your code.
+
+
+- `#3082 <https://github.com/pytest-dev/pytest/issues/3082>`_: Removed support for applying marks directly to values in ``@pytest.mark.parametrize``. Use ``pytest.param`` instead.
+
+  See our `docs <https://docs.pytest.org/en/latest/deprecations.html#marks-in-pytest-mark-parametrize>`__ on information on how to update your code.
+
+
+- `#3083 <https://github.com/pytest-dev/pytest/issues/3083>`_: Removed ``Metafunc.addcall``. This was the predecessor mechanism to ``@pytest.mark.parametrize``.
+
+  See our `docs <https://docs.pytest.org/en/latest/deprecations.html#metafunc-addcall>`__ on information on how to update your code.
+
+
+- `#3085 <https://github.com/pytest-dev/pytest/issues/3085>`_: Removed support for passing strings to ``pytest.main``. Now, always pass a list of strings instead.
+
+  See our `docs <https://docs.pytest.org/en/latest/deprecations.html#passing-command-line-string-to-pytest-main>`__ on information on how to update your code.
+
+
+- `#3086 <https://github.com/pytest-dev/pytest/issues/3086>`_: ``[pytest]`` section in **setup.cfg** files is not longer supported, use ``[tool:pytest]`` instead. ``setup.cfg`` files
+  are meant for use with ``distutils``, and a section named ``pytest`` has notoriously been a source of conflicts and bugs.
+
+  Note that for **pytest.ini** and **tox.ini** files the section remains ``[pytest]``.
+
+
+- `#3616 <https://github.com/pytest-dev/pytest/issues/3616>`_: Removed the deprecated compat properties for ``node.Class/Function/Module`` - use ``pytest.Class/Function/Module`` now.
+
+  See our `docs <https://docs.pytest.org/en/latest/deprecations.html#internal-classes-accessed-through-node>`__ on information on how to update your code.
+
+
+- `#4421 <https://github.com/pytest-dev/pytest/issues/4421>`_: Removed the implementation of the ``pytest_namespace`` hook.
+
+  See our `docs <https://docs.pytest.org/en/latest/deprecations.html#pytest-namespace>`__ on information on how to update your code.
+
+
+- `#4489 <https://github.com/pytest-dev/pytest/issues/4489>`_: Removed ``request.cached_setup``. This was the predecessor mechanism to modern fixtures.
+
+  See our `docs <https://docs.pytest.org/en/latest/deprecations.html#cached-setup>`__ on information on how to update your code.
+
+
+- `#4535 <https://github.com/pytest-dev/pytest/issues/4535>`_: Removed the deprecated ``PyCollector.makeitem`` method. This method was made public by mistake a long time ago.
+
+
+- `#4543 <https://github.com/pytest-dev/pytest/issues/4543>`_: Removed support to define fixtures using the ``pytest_funcarg__`` prefix. Use the ``@pytest.fixture`` decorator instead.
+
+  See our `docs <https://docs.pytest.org/en/latest/deprecations.html#pytest-funcarg-prefix>`__ on information on how to update your code.
+
+
+- `#4545 <https://github.com/pytest-dev/pytest/issues/4545>`_: Calling fixtures directly is now always an error instead of a warning.
+
+  See our `docs <https://docs.pytest.org/en/latest/deprecations.html#calling-fixtures-directly>`__ on information on how to update your code.
+
+
+- `#4546 <https://github.com/pytest-dev/pytest/issues/4546>`_: Remove ``Node.get_marker(name)`` the return value was not usable for more than a existence check.
+
+  Use ``Node.get_closest_marker(name)`` as a replacement.
+
+
+- `#4547 <https://github.com/pytest-dev/pytest/issues/4547>`_: The deprecated ``record_xml_property`` fixture has been removed, use the more generic ``record_property`` instead.
+
+  See our `docs <https://docs.pytest.org/en/latest/deprecations.html#record-xml-property>`__ for more information.
+
+
+- `#4548 <https://github.com/pytest-dev/pytest/issues/4548>`_: An error is now raised if the ``pytest_plugins`` variable is defined in a non-top-level ``conftest.py`` file (i.e., not residing in the ``rootdir``).
+
+  See our `docs <https://docs.pytest.org/en/latest/deprecations.html#pytest-plugins-in-non-top-level-conftest-files>`__ for more information.
+
+
+- `#891 <https://github.com/pytest-dev/pytest/issues/891>`_: Remove ``testfunction.markername`` attributes - use ``Node.iter_markers(name=None)`` to iterate them.
+
+
+
+Deprecations
+------------
+
+- `#3050 <https://github.com/pytest-dev/pytest/issues/3050>`_: Deprecated the ``pytest.config`` global.
+
+  See https://docs.pytest.org/en/latest/deprecations.html#pytest-config-global for rationale.
+
+
+- `#3974 <https://github.com/pytest-dev/pytest/issues/3974>`_: Passing the ``message`` parameter of ``pytest.raises`` now issues a ``DeprecationWarning``.
+
+  It is a common mistake to think this parameter will match the exception message, while in fact
+  it only serves to provide a custom message in case the ``pytest.raises`` check fails. To avoid this
+  mistake and because it is believed to be little used, pytest is deprecating it without providing
+  an alternative for the moment.
+
+  If you have concerns about this, please comment on `issue #3974 <https://github.com/pytest-dev/pytest/issues/3974>`__.
+
+
+- `#4435 <https://github.com/pytest-dev/pytest/issues/4435>`_: Deprecated ``raises(..., 'code(as_a_string)')`` and ``warns(..., 'code(as_a_string)')``.
+
+  See https://docs.pytest.org/en/latest/deprecations.html#raises-warns-exec for rationale and examples.
+
+
+
+Features
+--------
+
+- `#3191 <https://github.com/pytest-dev/pytest/issues/3191>`_: A warning is now issued when assertions are made for ``None``.
+
+  This is a common source of confusion among new users, which write:
+
+  .. code-block:: python
+
+      assert mocked_object.assert_called_with(3, 4, 5, key="value")
+
+  When they should write:
+
+  .. code-block:: python
+
+      mocked_object.assert_called_with(3, 4, 5, key="value")
+
+  Because the ``assert_called_with`` method of mock objects already executes an assertion.
+
+  This warning will not be issued when ``None`` is explicitly checked. An assertion like:
+
+  .. code-block:: python
+
+      assert variable is None
+
+  will not issue the warning.
+
+
+- `#3632 <https://github.com/pytest-dev/pytest/issues/3632>`_: Richer equality comparison introspection on ``AssertionError`` for objects created using `attrs <http://www.attrs.org/en/stable/>`_ or `dataclasses <https://docs.python.org/3/library/dataclasses.html>`_ (Python 3.7+, `backported to 3.6 <https://pypi.org/project/dataclasses>`_).
+
+
+- `#4278 <https://github.com/pytest-dev/pytest/issues/4278>`_: ``CACHEDIR.TAG`` files are now created inside cache directories.
+
+  Those files are part of the `Cache Directory Tagging Standard <http://www.bford.info/cachedir/spec.html>`__, and can
+  be used by backup or synchronization programs to identify pytest's cache directory as such.
+
+
+- `#4292 <https://github.com/pytest-dev/pytest/issues/4292>`_: ``pytest.outcomes.Exit`` is derived from ``SystemExit`` instead of ``KeyboardInterrupt``. This allows us to better handle ``pdb`` exiting.
+
+
+- `#4371 <https://github.com/pytest-dev/pytest/issues/4371>`_: Updated the ``--collect-only`` option to display test descriptions when ran using ``--verbose``.
+
+
+- `#4386 <https://github.com/pytest-dev/pytest/issues/4386>`_: Restructured ``ExceptionInfo`` object construction and ensure incomplete instances have a ``repr``/``str``.
+
+
+- `#4416 <https://github.com/pytest-dev/pytest/issues/4416>`_: pdb: added support for keyword arguments with ``pdb.set_trace``.
+
+  It handles ``header`` similar to Python 3.7 does it, and forwards any
+  other keyword arguments to the ``Pdb`` constructor.
+
+  This allows for ``__import__("pdb").set_trace(skip=["foo.*"])``.
+
+
+- `#4483 <https://github.com/pytest-dev/pytest/issues/4483>`_: Added ini parameter ``junit_duration_report`` to optionally report test call durations, excluding setup and teardown times.
+
+  The JUnit XML specification and the default pytest behavior is to include setup and teardown times in the test duration
+  report. You can include just the call durations instead (excluding setup and teardown) by adding this to your ``pytest.ini`` file:
+
+  .. code-block:: ini
+
+      [pytest]
+      junit_duration_report = call
+
+
+- `#4532 <https://github.com/pytest-dev/pytest/issues/4532>`_: ``-ra`` now will show errors and failures last, instead of as the first items in the summary.
+
+  This makes it easier to obtain a list of errors and failures to run tests selectively.
+
+
+- `#4599 <https://github.com/pytest-dev/pytest/issues/4599>`_: ``pytest.importorskip`` now supports a ``reason`` parameter, which will be shown when the
+  requested module cannot be imported.
+
+
+
+Bug Fixes
+---------
+
+- `#3532 <https://github.com/pytest-dev/pytest/issues/3532>`_: ``-p`` now accepts its argument without a space between the value, for example ``-pmyplugin``.
+
+
+- `#4327 <https://github.com/pytest-dev/pytest/issues/4327>`_: ``approx`` again works with more generic containers, more precisely instances of ``Iterable`` and ``Sized`` instead of more restrictive ``Sequence``.
+
+
+- `#4397 <https://github.com/pytest-dev/pytest/issues/4397>`_: Ensure that node ids are printable.
+
+
+- `#4435 <https://github.com/pytest-dev/pytest/issues/4435>`_: Fixed ``raises(..., 'code(string)')`` frame filename.
+
+
+- `#4458 <https://github.com/pytest-dev/pytest/issues/4458>`_: Display actual test ids in ``--collect-only``.
+
+
+
+Improved Documentation
+----------------------
+
+- `#4557 <https://github.com/pytest-dev/pytest/issues/4557>`_: Markers example documentation page updated to support latest pytest version.
+
+
+- `#4558 <https://github.com/pytest-dev/pytest/issues/4558>`_: Update cache documentation example to correctly show cache hit and miss.
+
+
+- `#4580 <https://github.com/pytest-dev/pytest/issues/4580>`_: Improved detailed summary report documentation.
+
+
+
+Trivial/Internal Changes
+------------------------
+
+- `#4447 <https://github.com/pytest-dev/pytest/issues/4447>`_: Changed the deprecation type of ``--result-log`` to ``PytestDeprecationWarning``.
+
+  It was decided to remove this feature at the next major revision.
+
+
 pytest 4.0.2 (2018-12-13)
 =========================
 

changelog/2169.removal.rst

@@ -1 +0,0 @@
-``pytest.mark.parametrize``: in previous versions, errors raised by id functions were suppressed and changed into warnings. Now the exceptions are propagated, along with a pytest message informing the node, parameter value and index where the exception occurred.

changelog/3050.deprecation.rst

@@ -1,3 +0,0 @@
-Deprecated the ``pytest.config`` global.
-
-See https://docs.pytest.org/en/latest/deprecations.html#pytest-config-global for rationale.

changelog/3078.removal.rst

@@ -1,3 +0,0 @@
-Remove legacy internal warnings system: ``config.warn``, ``Node.warn``. The ``pytest_logwarning`` now issues a warning when implemented.
-
-See our `docs <https://docs.pytest.org/en/latest/deprecations.html#config-warn-and-node-warn>`__ on information on how to update your code.

changelog/3079.removal.rst

@@ -1,3 +0,0 @@
-Removed support for yield tests - they are fundamentally broken because they don't support fixtures properly since collection and test execution were separated.
-
-See our `docs <https://docs.pytest.org/en/latest/deprecations.html#yield-tests>`__ on information on how to update your code.

changelog/3082.removal.rst

@@ -1,3 +0,0 @@
-Removed support for applying marks directly to values in ``@pytest.mark.parametrize``. Use ``pytest.param`` instead.
-
-See our `docs <https://docs.pytest.org/en/latest/deprecations.html#marks-in-pytest-mark-parametrize>`__ on information on how to update your code.

changelog/3083.removal.rst

@@ -1,3 +0,0 @@
-Removed ``Metafunc.addcall``. This was the predecessor mechanism to ``@pytest.mark.parametrize``.
-
-See our `docs <https://docs.pytest.org/en/latest/deprecations.html#metafunc-addcall>`__ on information on how to update your code.

changelog/3085.removal.rst

@@ -1,3 +0,0 @@
-Removed support for passing strings to ``pytest.main``. Now, always pass a list of strings instead.
-
-See our `docs <https://docs.pytest.org/en/latest/deprecations.html#passing-command-line-string-to-pytest-main>`__ on information on how to update your code.

changelog/3086.removal.rst

@@ -1,4 +0,0 @@
-``[pytest]`` section in **setup.cfg** files is not longer supported, use ``[tool:pytest]`` instead. ``setup.cfg`` files
-are meant for use with ``distutils``, and a section named ``pytest`` has notoriously been a source of conflicts and bugs.
-
-Note that for **pytest.ini** and **tox.ini** files the section remains ``[pytest]``.

changelog/3191.feature.rst

@@ -1,23 +0,0 @@
-A warning is now issued when assertions are made for ``None``.
-
-This is a common source of confusion among new users, which write:
-
-.. code-block:: python
-
-    assert mocked_object.assert_called_with(3, 4, 5, key="value")
-
-When they should write:
-
-.. code-block:: python
-
-    mocked_object.assert_called_with(3, 4, 5, key="value")
-
-Because the ``assert_called_with`` method of mock objects already executes an assertion.
-
-This warning will not be issued when ``None`` is explicitly checked. An assertion like:
-
-.. code-block:: python
-
-    assert variable is None
-
-will not issue the warning.

changelog/3532.bugfix.rst

@@ -1 +0,0 @@
-``-p`` now accepts its argument without a space between the value, for example ``-pmyplugin``.

changelog/3616.removal.rst

@@ -1,3 +0,0 @@
-Removed the deprecated compat properties for ``node.Class/Function/Module`` - use ``pytest.Class/Function/Module`` now.
-
-See our `docs <https://docs.pytest.org/en/latest/deprecations.html#internal-classes-accessed-through-node>`__ on information on how to update your code.

changelog/3632.feature.rst

@@ -1 +0,0 @@
-Richer equality comparison introspection on ``AssertionError`` for objects created using `attrs <http://www.attrs.org/en/stable/>`_ or `dataclasses <https://docs.python.org/3/library/dataclasses.html>`_ (Python 3.7+, `backported to 3.6 <https://pypi.org/project/dataclasses>`_).

changelog/3974.deprecation.rst

@@ -1,8 +0,0 @@
-Passing the ``message`` parameter of ``pytest.raises`` now issues a ``DeprecationWarning``.
-
-It is a common mistake to think this parameter will match the exception message, while in fact
-it only serves to provide a custom message in case the ``pytest.raises`` check fails. To avoid this
-mistake and because it is believed to be little used, pytest is deprecating it without providing
-an alternative for the moment.
-
-If you have concerns about this, please comment on `issue #3974 <https://github.com/pytest-dev/pytest/issues/3974>`__.

changelog/4278.feature.rst

@@ -1,4 +0,0 @@
-``CACHEDIR.TAG`` files are now created inside cache directories.
-
-Those files are part of the `Cache Directory Tagging Standard <http://www.bford.info/cachedir/spec.html>`__, and can
-be used by backup or synchronization programs to identify pytest's cache directory as such.

changelog/4292.feature.rst

@@ -1 +0,0 @@
-``pytest.outcomes.Exit`` is derived from ``SystemExit`` instead of ``KeyboardInterrupt``. This allows us to better handle ``pdb`` exiting.

changelog/4327.bugfix.rst

@@ -1 +0,0 @@
-``approx`` again works with more generic containers, more precisely instances of ``Iterable`` and ``Sized`` instead of more restrictive ``Sequence``.

changelog/4371.feature.rst

@@ -1 +0,0 @@
-Updated the ``--collect-only`` option to display test descriptions when ran using ``--verbose``.

changelog/4386.feature.rst

@@ -1 +0,0 @@
-Restructured ``ExceptionInfo`` object construction and ensure incomplete instances have a ``repr``/``str``.

changelog/4397.bugfix.rst

@@ -1 +0,0 @@
-Ensure that node ids are printable.

changelog/4416.feature.rst

@@ -1,6 +0,0 @@
-pdb: added support for keyword arguments with ``pdb.set_trace``.
-
-It handles ``header`` similar to Python 3.7 does it, and forwards any
-other keyword arguments to the ``Pdb`` constructor.
-
-This allows for ``__import__("pdb").set_trace(skip=["foo.*"])``.

changelog/4421.removal.rst

@@ -1,3 +0,0 @@
-Removed the implementation of the ``pytest_namespace`` hook.
-
-See our `docs <https://docs.pytest.org/en/latest/deprecations.html#pytest-namespace>`__ on information on how to update your code.

changelog/4435.bugfix.rst

@@ -1 +0,0 @@
-Fixed ``raises(..., 'code(string)')`` frame filename.

changelog/4435.deprecation.rst

@@ -1,3 +0,0 @@
-Deprecated ``raises(..., 'code(as_a_string)')`` and ``warns(..., 'code(as_a_string)')``.
-
-See https://docs.pytest.org/en/latest/deprecations.html#raises-warns-exec for rationale and examples.

changelog/4447.trivial.rst

@@ -1,3 +0,0 @@
-Changed the deprecation type of ``--result-log`` to ``PytestDeprecationWarning``.
-
-It was decided to remove this feature at the next major revision.

changelog/4458.bugfix.rst

@@ -1 +0,0 @@
-Display actual test ids in ``--collect-only``.

changelog/4483.feature.rst

@@ -1,9 +0,0 @@
-Added ini parameter ``junit_duration_report`` to optionally report test call durations, excluding setup and teardown times.
-
-The JUnit XML specification and the default pytest behavior is to include setup and teardown times in the test duration
-report. You can include just the call durations instead (excluding setup and teardown) by adding this to your ``pytest.ini`` file:
-
-.. code-block:: ini
-
-    [pytest]
-    junit_duration_report = call

changelog/4489.removal.rst

@@ -1,3 +0,0 @@
-Removed ``request.cached_setup``. This was the predecessor mechanism to modern fixtures.
-
-See our `docs <https://docs.pytest.org/en/latest/deprecations.html#cached-setup>`__ on information on how to update your code.

changelog/4532.feature.rst

@@ -1,3 +0,0 @@
-``-ra`` now will show errors and failures last, instead of as the first items in the summary.
-
-This makes it easier to obtain a list of errors and failures to run tests selectively.

changelog/4535.removal.rst

@@ -1 +0,0 @@
-Removed the deprecated ``PyCollector.makeitem`` method. This method was made public by mistake a long time ago.

changelog/4543.removal.rst

@@ -1,3 +0,0 @@
-Removed support to define fixtures using the ``pytest_funcarg__`` prefix. Use the ``@pytest.fixture`` decorator instead.
-
-See our `docs <https://docs.pytest.org/en/latest/deprecations.html#pytest-funcarg-prefix>`__ on information on how to update your code.

changelog/4545.removal.rst

@@ -1,3 +0,0 @@
-Calling fixtures directly is now always an error instead of a warning.
-
-See our `docs <https://docs.pytest.org/en/latest/deprecations.html#calling-fixtures-directly>`__ on information on how to update your code.

changelog/4546.removal.rst

@@ -1,3 +0,0 @@
-Remove ``Node.get_marker(name)`` the return value was not usable for more than a existence check.
-
-Use ``Node.get_closest_marker(name)`` as a replacement.

changelog/4547.removal.rst

@@ -1,3 +0,0 @@
-The deprecated ``record_xml_property`` fixture has been removed, use the more generic ``record_property`` instead.
-
-See our `docs <https://docs.pytest.org/en/latest/deprecations.html#record-xml-property>`__ for more information.

changelog/4548.removal.rst

@@ -1,3 +0,0 @@
-An error is now raised if the ``pytest_plugins`` variable is defined in a non-top-level ``conftest.py`` file (i.e., not residing in the ``rootdir``).
-
-See our `docs <https://docs.pytest.org/en/latest/deprecations.html#pytest-plugins-in-non-top-level-conftest-files>`__ for more information.

changelog/4557.doc.rst

@@ -1 +0,0 @@
-Markers example documentation page updated to support latest pytest version.

changelog/4558.doc.rst

@@ -1 +0,0 @@
-Update cache documentation example to correctly show cache hit and miss.

changelog/4580.doc.rst

@@ -1 +0,0 @@
-Improved detailed summary report documentation.

changelog/4599.feature.rst

@@ -1,2 +0,0 @@
-``pytest.importorskip`` now supports a ``reason`` parameter, which will be shown when the
-requested module cannot be imported.

changelog/891.removal.rst

@@ -1 +0,0 @@
-Remove ``testfunction.markername`` attributes - use ``Node.iter_markers(name=None)`` to iterate them.

doc/en/announce/index.rst

@@ -6,6 +6,7 @@ Release announcements
    :maxdepth: 2
 
 
+   release-4.1.0
    release-4.0.2
    release-4.0.1
    release-4.0.0

doc/en/announce/release-4.1.0.rst

@@ -0,0 +1,44 @@
+pytest-4.1.0
+=======================================
+
+The pytest team is proud to announce the 4.1.0 release!
+
+pytest is a mature Python testing tool with more than a 2000 tests
+against itself, passing on many different interpreters and platforms.
+
+This release contains a number of bugs fixes and improvements, so users are encouraged
+to take a look at the CHANGELOG:
+
+    https://docs.pytest.org/en/latest/changelog.html
+
+For complete documentation, please visit:
+
+    https://docs.pytest.org/en/latest/
+
+As usual, you can upgrade from pypi via:
+
+    pip install -U pytest
+
+Thanks to all who contributed to this release, among them:
+
+* Adam Johnson
+* Aly Sivji
+* Andrey Paramonov
+* Anthony Sottile
+* Bruno Oliveira
+* Daniel Hahler
+* David Vo
+* Hyunchel Kim
+* Jeffrey Rackauckas
+* Kanguros
+* Nicholas Devenish
+* Pedro Algarvio
+* Randy Barlow
+* Ronny Pfannschmidt
+* Tomer Keren
+* feuillemorte
+* wim glenn
+
+
+Happy testing,
+The Pytest Development Team

doc/en/builtin.rst

@@ -68,8 +68,6 @@ For information about fixtures, see :ref:`fixtures`. To see a complete list of a
 
             def test_function(record_property):
                 record_property("example_key", 1)
-    record_xml_property
-        (Deprecated) use record_property.
     record_xml_attribute
         Add extra xml attributes to the tag for the calling test.
         The fixture is callable with ``(name, value)``, with value being

doc/en/cache.rst

@@ -215,7 +215,9 @@ If you run this command for the first time, you can see the print statement:
     >       assert mydata == 23
     E       assert 42 == 23
 
-    test_caching.py:14: AssertionError
+    test_caching.py:17: AssertionError
+    -------------------------- Captured stdout setup ---------------------------
+    running expensive computation...
     1 failed in 0.12 seconds
 
 If you run it a second time the value will be retrieved from
@@ -234,7 +236,7 @@ the cache and nothing will be printed:
     >       assert mydata == 23
     E       assert 42 == 23
 
-    test_caching.py:14: AssertionError
+    test_caching.py:17: AssertionError
     1 failed in 0.12 seconds
 
 See the :ref:`cache-api` for more details.

doc/en/example/nonpython.rst

@@ -90,9 +90,9 @@ interesting to just look at the collection tree:
     platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
     rootdir: $REGENDOC_TMPDIR/nonpython, inifile:
     collected 2 items
-    <Package '$REGENDOC_TMPDIR/nonpython'>
+    <Package $REGENDOC_TMPDIR/nonpython>
-      <YamlFile 'test_simple.yml'>
+      <YamlFile test_simple.yml>
-        <YamlItem 'hello'>
+        <YamlItem hello>
-        <YamlItem 'ok'>
+        <YamlItem ok>
 
     ======================= no tests ran in 0.12 seconds =======================

doc/en/example/parametrize.rst

@@ -147,15 +147,15 @@ objects, they are still using the default pytest representation:
     platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
     rootdir: $REGENDOC_TMPDIR, inifile:
     collected 8 items
-    <Module 'test_time.py'>
+    <Module test_time.py>
-      <Function 'test_timedistance_v0[a0-b0-expected0]'>
+      <Function test_timedistance_v0[a0-b0-expected0]>
-      <Function 'test_timedistance_v0[a1-b1-expected1]'>
+      <Function test_timedistance_v0[a1-b1-expected1]>
-      <Function 'test_timedistance_v1[forward]'>
+      <Function test_timedistance_v1[forward]>
-      <Function 'test_timedistance_v1[backward]'>
+      <Function test_timedistance_v1[backward]>
-      <Function 'test_timedistance_v2[20011212-20011211-expected0]'>
+      <Function test_timedistance_v2[20011212-20011211-expected0]>
-      <Function 'test_timedistance_v2[20011211-20011212-expected1]'>
+      <Function test_timedistance_v2[20011211-20011212-expected1]>
-      <Function 'test_timedistance_v3[forward]'>
+      <Function test_timedistance_v3[forward]>
-      <Function 'test_timedistance_v3[backward]'>
+      <Function test_timedistance_v3[backward]>
 
     ======================= no tests ran in 0.12 seconds =======================
 
@@ -219,12 +219,12 @@ If you just collect tests you'll also nicely see 'advanced' and 'basic' as varia
     platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
     rootdir: $REGENDOC_TMPDIR, inifile:
     collected 4 items
-    <Module 'test_scenarios.py'>
+    <Module test_scenarios.py>
-      <Class 'TestSampleWithScenarios'>
+      <Class TestSampleWithScenarios>
-          <Function 'test_demo1[basic]'>
+          <Function test_demo1[basic]>
-          <Function 'test_demo2[basic]'>
+          <Function test_demo2[basic]>
-          <Function 'test_demo1[advanced]'>
+          <Function test_demo1[advanced]>
-          <Function 'test_demo2[advanced]'>
+          <Function test_demo2[advanced]>
 
     ======================= no tests ran in 0.12 seconds =======================
 
@@ -285,9 +285,9 @@ Let's first see how it looks like at collection time:
     platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
     rootdir: $REGENDOC_TMPDIR, inifile:
     collected 2 items
-    <Module 'test_backends.py'>
+    <Module test_backends.py>
-      <Function 'test_db_initialized[d1]'>
+      <Function test_db_initialized[d1]>
-      <Function 'test_db_initialized[d2]'>
+      <Function test_db_initialized[d2]>
 
     ======================= no tests ran in 0.12 seconds =======================
 
@@ -350,8 +350,8 @@ The result of this test will be successful:
     platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
     rootdir: $REGENDOC_TMPDIR, inifile:
     collected 1 item
-    <Module 'test_indirect_list.py'>
+    <Module test_indirect_list.py>
-      <Function 'test_indirect[a-b]'>
+      <Function test_indirect[a-b]>
 
     ======================= no tests ran in 0.12 seconds =======================
 

doc/en/example/pythoncollection.rst

@@ -134,10 +134,10 @@ The test collection would look like this:
     platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
     rootdir: $REGENDOC_TMPDIR, inifile: pytest.ini
     collected 2 items
-    <Module 'check_myapp.py'>
+    <Module check_myapp.py>
-      <Class 'CheckMyApp'>
+      <Class CheckMyApp>
-          <Function 'simple_check'>
+          <Function simple_check>
-          <Function 'complex_check'>
+          <Function complex_check>
 
     ======================= no tests ran in 0.12 seconds =======================
 
@@ -189,11 +189,11 @@ You can always peek at the collection tree without running tests like this:
     platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
     rootdir: $REGENDOC_TMPDIR, inifile: pytest.ini
     collected 3 items
-    <Module 'CWD/pythoncollection.py'>
+    <Module CWD/pythoncollection.py>
-      <Function 'test_function'>
+      <Function test_function>
-      <Class 'TestClass'>
+      <Class TestClass>
-          <Function 'test_method'>
+          <Function test_method>
-          <Function 'test_anothermethod'>
+          <Function test_anothermethod>
 
     ======================= no tests ran in 0.12 seconds =======================
 

doc/en/example/reportingdemo.rst

@@ -15,9 +15,9 @@ get on the terminal - we are working on that):
     =========================== test session starts ============================
     platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
     rootdir: $REGENDOC_TMPDIR/assertion, inifile:
-    collected 42 items
+    collected 44 items
 
-    failure_demo.py FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF           [100%]
+    failure_demo.py FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF         [100%]
 
     ================================= FAILURES =================================
     ___________________________ test_generative[3-6] ___________________________
@@ -289,6 +289,36 @@ get on the terminal - we are working on that):
     E         ?           ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
     failure_demo.py:99: AssertionError
+    ______________ TestSpecialisedExplanations.test_eq_dataclass _______________
+
+    self = <failure_demo.TestSpecialisedExplanations object at 0xdeadbeef>
+
+        def test_eq_dataclass(self):
+    >       from dataclasses import dataclass
+    E       ModuleNotFoundError: No module named 'dataclasses'
+
+    failure_demo.py:102: ModuleNotFoundError
+    ________________ TestSpecialisedExplanations.test_eq_attrs _________________
+
+    self = <failure_demo.TestSpecialisedExplanations object at 0xdeadbeef>
+
+        def test_eq_attrs(self):
+            import attr
+
+            @attr.s
+            class Foo(object):
+                a = attr.ib()
+                b = attr.ib()
+
+            left = Foo(1, "b")
+            right = Foo(1, "c")
+    >       assert left == right
+    E       AssertionError: assert Foo(a=1, b='b') == Foo(a=1, b='c')
+    E         Omitting 1 identical items, use -vv to show
+    E         Differing attributes:
+    E         b: 'b' != 'c'
+
+    failure_demo.py:123: AssertionError
     ______________________________ test_attribute ______________________________
 
         def test_attribute():
@@ -300,7 +330,7 @@ get on the terminal - we are working on that):
     E       assert 1 == 2
     E        +  where 1 = <failure_demo.test_attribute.<locals>.Foo object at 0xdeadbeef>.b
 
-    failure_demo.py:107: AssertionError
+    failure_demo.py:131: AssertionError
     _________________________ test_attribute_instance __________________________
 
         def test_attribute_instance():
@@ -312,7 +342,7 @@ get on the terminal - we are working on that):
     E        +  where 1 = <failure_demo.test_attribute_instance.<locals>.Foo object at 0xdeadbeef>.b
     E        +    where <failure_demo.test_attribute_instance.<locals>.Foo object at 0xdeadbeef> = <class 'failure_demo.test_attribute_instance.<locals>.Foo'>()
 
-    failure_demo.py:114: AssertionError
+    failure_demo.py:138: AssertionError
     __________________________ test_attribute_failure __________________________
 
         def test_attribute_failure():
@@ -325,7 +355,7 @@ get on the terminal - we are working on that):
             i = Foo()
     >       assert i.b == 2
 
-    failure_demo.py:125:
+    failure_demo.py:149:
     _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 
     self = <failure_demo.test_attribute_failure.<locals>.Foo object at 0xdeadbeef>
@@ -334,7 +364,7 @@ get on the terminal - we are working on that):
     >       raise Exception("Failed to get attrib")
     E       Exception: Failed to get attrib
 
-    failure_demo.py:120: Exception
+    failure_demo.py:144: Exception
     _________________________ test_attribute_multiple __________________________
 
         def test_attribute_multiple():
@@ -351,31 +381,26 @@ get on the terminal - we are working on that):
     E        +  and   2 = <failure_demo.test_attribute_multiple.<locals>.Bar object at 0xdeadbeef>.b
     E        +    where <failure_demo.test_attribute_multiple.<locals>.Bar object at 0xdeadbeef> = <class 'failure_demo.test_attribute_multiple.<locals>.Bar'>()
 
-    failure_demo.py:135: AssertionError
+    failure_demo.py:159: AssertionError
     __________________________ TestRaises.test_raises __________________________
 
     self = <failure_demo.TestRaises object at 0xdeadbeef>
 
         def test_raises(self):
-            s = "qwe"  # NOQA
+            s = "qwe"
-    >       raises(TypeError, "int(s)")
+    >       raises(TypeError, int, s)
+    E       ValueError: invalid literal for int() with base 10: 'qwe'
 
-    failure_demo.py:145:
+    failure_demo.py:169: ValueError
-    _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
-
-    >   int(s)
-    E   ValueError: invalid literal for int() with base 10: 'qwe'
-
-    <0-codegen $REGENDOC_TMPDIR/assertion/failure_demo.py:145>:1: ValueError
     ______________________ TestRaises.test_raises_doesnt _______________________
 
     self = <failure_demo.TestRaises object at 0xdeadbeef>
 
         def test_raises_doesnt(self):
-    >       raises(IOError, "int('3')")
+    >       raises(IOError, int, "3")
     E       Failed: DID NOT RAISE <class 'OSError'>
 
-    failure_demo.py:148: Failed
+    failure_demo.py:172: Failed
     __________________________ TestRaises.test_raise ___________________________
 
     self = <failure_demo.TestRaises object at 0xdeadbeef>
@@ -384,7 +409,7 @@ get on the terminal - we are working on that):
     >       raise ValueError("demo error")
     E       ValueError: demo error
 
-    failure_demo.py:151: ValueError
+    failure_demo.py:175: ValueError
     ________________________ TestRaises.test_tupleerror ________________________
 
     self = <failure_demo.TestRaises object at 0xdeadbeef>
@@ -393,7 +418,7 @@ get on the terminal - we are working on that):
     >       a, b = [1]  # NOQA
     E       ValueError: not enough values to unpack (expected 2, got 1)
 
-    failure_demo.py:154: ValueError
+    failure_demo.py:178: ValueError
     ______ TestRaises.test_reinterpret_fails_with_print_for_the_fun_of_it ______
 
     self = <failure_demo.TestRaises object at 0xdeadbeef>
@@ -404,7 +429,7 @@ get on the terminal - we are working on that):
     >       a, b = items.pop()
     E       TypeError: 'int' object is not iterable
 
-    failure_demo.py:159: TypeError
+    failure_demo.py:183: TypeError
     --------------------------- Captured stdout call ---------------------------
     items is [1, 2, 3]
     ________________________ TestRaises.test_some_error ________________________
@@ -415,7 +440,7 @@ get on the terminal - we are working on that):
     >       if namenotexi:  # NOQA
     E       NameError: name 'namenotexi' is not defined
 
-    failure_demo.py:162: NameError
+    failure_demo.py:186: NameError
     ____________________ test_dynamic_compile_shows_nicely _____________________
 
         def test_dynamic_compile_shows_nicely():
@@ -430,14 +455,14 @@ get on the terminal - we are working on that):
             sys.modules[name] = module
     >       module.foo()
 
-    failure_demo.py:180:
+    failure_demo.py:204:
     _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 
         def foo():
     >    assert 1 == 0
     E    AssertionError
 
-    <2-codegen 'abc-123' $REGENDOC_TMPDIR/assertion/failure_demo.py:177>:2: AssertionError
+    <0-codegen 'abc-123' $REGENDOC_TMPDIR/assertion/failure_demo.py:201>:2: AssertionError
     ____________________ TestMoreErrors.test_complex_error _____________________
 
     self = <failure_demo.TestMoreErrors object at 0xdeadbeef>
@@ -451,7 +476,7 @@ get on the terminal - we are working on that):
 
     >       somefunc(f(), g())
 
-    failure_demo.py:191:
+    failure_demo.py:215:
     _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
     failure_demo.py:13: in somefunc
         otherfunc(x, y)
@@ -473,7 +498,7 @@ get on the terminal - we are working on that):
     >       a, b = items
     E       ValueError: not enough values to unpack (expected 2, got 0)
 
-    failure_demo.py:195: ValueError
+    failure_demo.py:219: ValueError
     ____________________ TestMoreErrors.test_z2_type_error _____________________
 
     self = <failure_demo.TestMoreErrors object at 0xdeadbeef>
@@ -483,7 +508,7 @@ get on the terminal - we are working on that):
     >       a, b = items
     E       TypeError: 'int' object is not iterable
 
-    failure_demo.py:199: TypeError
+    failure_demo.py:223: TypeError
     ______________________ TestMoreErrors.test_startswith ______________________
 
     self = <failure_demo.TestMoreErrors object at 0xdeadbeef>
@@ -496,7 +521,7 @@ get on the terminal - we are working on that):
     E        +  where False = <built-in method startswith of str object at 0xdeadbeef>('456')
     E        +    where <built-in method startswith of str object at 0xdeadbeef> = '123'.startswith
 
-    failure_demo.py:204: AssertionError
+    failure_demo.py:228: AssertionError
     __________________ TestMoreErrors.test_startswith_nested ___________________
 
     self = <failure_demo.TestMoreErrors object at 0xdeadbeef>
@@ -515,7 +540,7 @@ get on the terminal - we are working on that):
     E        +      where '123' = <function TestMoreErrors.test_startswith_nested.<locals>.f at 0xdeadbeef>()
     E        +    and   '456' = <function TestMoreErrors.test_startswith_nested.<locals>.g at 0xdeadbeef>()
 
-    failure_demo.py:213: AssertionError
+    failure_demo.py:237: AssertionError
     _____________________ TestMoreErrors.test_global_func ______________________
 
     self = <failure_demo.TestMoreErrors object at 0xdeadbeef>
@@ -526,7 +551,7 @@ get on the terminal - we are working on that):
     E        +  where False = isinstance(43, float)
     E        +    where 43 = globf(42)
 
-    failure_demo.py:216: AssertionError
+    failure_demo.py:240: AssertionError
     _______________________ TestMoreErrors.test_instance _______________________
 
     self = <failure_demo.TestMoreErrors object at 0xdeadbeef>
@@ -537,7 +562,7 @@ get on the terminal - we are working on that):
     E       assert 42 != 42
     E        +  where 42 = <failure_demo.TestMoreErrors object at 0xdeadbeef>.x
 
-    failure_demo.py:220: AssertionError
+    failure_demo.py:244: AssertionError
     _______________________ TestMoreErrors.test_compare ________________________
 
     self = <failure_demo.TestMoreErrors object at 0xdeadbeef>
@@ -547,7 +572,7 @@ get on the terminal - we are working on that):
     E       assert 11 < 5
     E        +  where 11 = globf(10)
 
-    failure_demo.py:223: AssertionError
+    failure_demo.py:247: AssertionError
     _____________________ TestMoreErrors.test_try_finally ______________________
 
     self = <failure_demo.TestMoreErrors object at 0xdeadbeef>
@@ -558,7 +583,7 @@ get on the terminal - we are working on that):
     >           assert x == 0
     E           assert 1 == 0
 
-    failure_demo.py:228: AssertionError
+    failure_demo.py:252: AssertionError
     ___________________ TestCustomAssertMsg.test_single_line ___________________
 
     self = <failure_demo.TestCustomAssertMsg object at 0xdeadbeef>
@@ -573,7 +598,7 @@ get on the terminal - we are working on that):
     E       assert 1 == 2
     E        +  where 1 = <class 'failure_demo.TestCustomAssertMsg.test_single_line.<locals>.A'>.a
 
-    failure_demo.py:239: AssertionError
+    failure_demo.py:263: AssertionError
     ____________________ TestCustomAssertMsg.test_multiline ____________________
 
     self = <failure_demo.TestCustomAssertMsg object at 0xdeadbeef>
@@ -592,7 +617,7 @@ get on the terminal - we are working on that):
     E       assert 1 == 2
     E        +  where 1 = <class 'failure_demo.TestCustomAssertMsg.test_multiline.<locals>.A'>.a
 
-    failure_demo.py:246: AssertionError
+    failure_demo.py:270: AssertionError
     ___________________ TestCustomAssertMsg.test_custom_repr ___________________
 
     self = <failure_demo.TestCustomAssertMsg object at 0xdeadbeef>
@@ -614,5 +639,5 @@ get on the terminal - we are working on that):
     E       assert 1 == 2
     E        +  where 1 = This is JSON\n{\n  'foo': 'bar'\n}.a
 
-    failure_demo.py:259: AssertionError
+    failure_demo.py:283: AssertionError
-    ======================== 42 failed in 0.12 seconds =========================
+    ======================== 44 failed in 0.12 seconds =========================

doc/en/example/simple.rst

@@ -598,7 +598,7 @@ We can run this:
     file $REGENDOC_TMPDIR/b/test_error.py, line 1
       def test_root(db):  # no db here, will error out
     E       fixture 'db' not found
-    >       available fixtures: cache, capfd, capfdbinary, caplog, capsys, capsysbinary, doctest_namespace, monkeypatch, pytestconfig, record_property, record_xml_attribute, record_xml_property, recwarn, tmp_path, tmp_path_factory, tmpdir, tmpdir_factory
+    >       available fixtures: cache, capfd, capfdbinary, caplog, capsys, capsysbinary, doctest_namespace, monkeypatch, pytestconfig, record_property, record_xml_attribute, recwarn, tmp_path, tmp_path_factory, tmpdir, tmpdir_factory
     >       use 'pytest --fixtures [testpath]' for help on them.
 
     $REGENDOC_TMPDIR/b/test_error.py:1

doc/en/fixture.rst

@@ -628,7 +628,7 @@ So let's just do another run:
             response, msg = smtp_connection.ehlo()
             assert response == 250
     >       assert b"smtp.gmail.com" in msg
-    E       AssertionError: assert b'smtp.gmail.com' in b'mail.python.org\nPIPELINING\nSIZE 51200000\nETRN\nSTARTTLS\nAUTH DIGEST-MD5 NTLM CRAM-MD5\nENHANCEDSTATUSCODES\n8BITMIME\nDSN\nSMTPUTF8'
+    E       AssertionError: assert b'smtp.gmail.com' in b'mail.python.org\nPIPELINING\nSIZE 51200000\nETRN\nSTARTTLS\nAUTH DIGEST-MD5 NTLM CRAM-MD5\nENHANCEDSTATUSCODES\n8BITMIME\nDSN\nSMTPUTF8\nCHUNKING'
 
     test_module.py:5: AssertionError
     -------------------------- Captured stdout setup ---------------------------
@@ -703,19 +703,19 @@ Running the above tests results in the following test IDs being used:
    platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
    rootdir: $REGENDOC_TMPDIR, inifile:
    collected 10 items
-   <Module 'test_anothersmtp.py'>
+   <Module test_anothersmtp.py>
-     <Function 'test_showhelo[smtp.gmail.com]'>
+     <Function test_showhelo[smtp.gmail.com]>
-     <Function 'test_showhelo[mail.python.org]'>
+     <Function test_showhelo[mail.python.org]>
-   <Module 'test_ids.py'>
+   <Module test_ids.py>
-     <Function 'test_a[spam]'>
+     <Function test_a[spam]>
-     <Function 'test_a[ham]'>
+     <Function test_a[ham]>
-     <Function 'test_b[eggs]'>
+     <Function test_b[eggs]>
-     <Function 'test_b[1]'>
+     <Function test_b[1]>
-   <Module 'test_module.py'>
+   <Module test_module.py>
-     <Function 'test_ehlo[smtp.gmail.com]'>
+     <Function test_ehlo[smtp.gmail.com]>
-     <Function 'test_noop[smtp.gmail.com]'>
+     <Function test_noop[smtp.gmail.com]>
-     <Function 'test_ehlo[mail.python.org]'>
+     <Function test_ehlo[mail.python.org]>
-     <Function 'test_noop[mail.python.org]'>
+     <Function test_noop[mail.python.org]>
 
    ======================= no tests ran in 0.12 seconds =======================
 

doc/en/usage.rst

@@ -158,34 +158,9 @@ Example:
     =========================== test session starts ============================
     platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
     rootdir: $REGENDOC_TMPDIR, inifile:
-    collected 7 items
+    collected 0 items
 
-    test_examples.py ..FEsxX                                                 [100%]
+    ======================= no tests ran in 0.12 seconds =======================
-
-    ==================================== ERRORS ====================================
-    _________________________ ERROR at setup of test_error _________________________
-    file /Users/chainz/tmp/pytestratest/test_examples.py, line 17
-      def test_error(unknown_fixture):
-    E       fixture 'unknown_fixture' not found
-    >       available fixtures: cache, capfd, capfdbinary, caplog, capsys, capsysbinary, doctest_namespace, monkeypatch, pytestconfig, record_property, record_xml_attribute, record_xml_property, recwarn, tmp_path, tmp_path_factory, tmpdir, tmpdir_factory
-    >       use 'pytest --fixtures [testpath]' for help on them.
-
-    /Users/chainz/tmp/pytestratest/test_examples.py:17
-    =================================== FAILURES ===================================
-    __________________________________ test_fail ___________________________________
-
-        def test_fail():
-    >       assert 0
-    E       assert 0
-
-    test_examples.py:14: AssertionError
-    =========================== short test summary info ============================
-    FAIL test_examples.py::test_fail
-    ERROR test_examples.py::test_error
-    SKIP [1] test_examples.py:21: Example
-    XFAIL test_examples.py::test_xfail
-    XPASS test_examples.py::test_xpass
-    = 1 failed, 2 passed, 1 skipped, 1 xfailed, 1 xpassed, 1 error in 0.07 seconds =
 
 The ``-r`` options accepts a number of characters after it, with ``a`` used above meaning "all except passes".
 
@@ -208,22 +183,9 @@ More than one character can be used, so for example to only see failed and skipp
     =========================== test session starts ============================
     platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
     rootdir: $REGENDOC_TMPDIR, inifile:
-    collected 2 items
+    collected 0 items
 
-    test_examples.py Fs                                                      [100%]
+    ======================= no tests ran in 0.12 seconds =======================
-
-    =================================== FAILURES ===================================
-    __________________________________ test_fail ___________________________________
-
-        def test_fail():
-    >       assert 0
-    E       assert 0
-
-    test_examples.py:14: AssertionError
-    =========================== short test summary info ============================
-    FAIL test_examples.py::test_fail
-    SKIP [1] test_examples.py:21: Example
-    ===================== 1 failed, 1 skipped in 0.09 seconds ======================
 
 Using ``p`` lists the passing tests, whilst ``P`` adds an extra section "PASSES" with those tests that passed but had
 captured output:
@@ -234,18 +196,9 @@ captured output:
     =========================== test session starts ============================
     platform linux -- Python 3.x.y, pytest-4.x.y, py-1.x.y, pluggy-0.x.y
     rootdir: $REGENDOC_TMPDIR, inifile:
-    collected 2 items
+    collected 0 items
 
-    test_examples.py ..                                                      [100%]
+    ======================= no tests ran in 0.12 seconds =======================
-    =========================== short test summary info ============================
-    PASSED test_examples.py::test_pass
-    PASSED test_examples.py::test_pass_with_output
-
-    ==================================== PASSES ====================================
-    ____________________________ test_pass_with_output _____________________________
-    ----------------------------- Captured stdout call -----------------------------
-    Passing test
-    =========================== 2 passed in 0.04 seconds ===========================
 
 .. _pdb-option: