Run regendoc for 3.0.2 release

doc/en/assert.rst

@@ -26,7 +26,7 @@ you will see the return value of the function call::
 
     $ pytest test_assert1.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     
@@ -170,7 +170,7 @@ if you run this module::
 
     $ pytest test_assert2.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     

doc/en/cache.rst

@@ -80,7 +80,7 @@ If you then run it with ``--lf``::
 
     $ pytest --lf
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     run-last-failure: rerun last 2 failures
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 50 items
@@ -122,7 +122,7 @@ of ``FF`` and dots)::
 
     $ pytest --ff
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     run-last-failure: rerun last 2 failures first
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 50 items
@@ -227,14 +227,14 @@ You can always peek at the content of the cache using the
 
     $ py.test --cache-show
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     cachedir: $REGENDOC_TMPDIR/.cache
     ------------------------------- cache values -------------------------------
-    cache/lastfailed contains:
-      {'test_caching.py::test_function': True}
     example/value contains:
       42
+    cache/lastfailed contains:
+      {'test_caching.py::test_function': True}
     
     ======= no tests ran in 0.12 seconds ========
 

doc/en/capture.rst

@@ -64,7 +64,7 @@ of the failing function and hide the other one::
 
     $ pytest
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     

doc/en/doctest.rst

@@ -49,7 +49,7 @@ then you can just invoke ``pytest`` without command line options::
 
     $ pytest
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: pytest.ini
     collected 1 items
     

doc/en/example/markers.rst

@@ -31,7 +31,7 @@ You can then restrict a test run to only run tests marked with ``webtest``::
 
     $ pytest -v -m webtest
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -45,7 +45,7 @@ Or the inverse, running all tests except the webtest ones::
 
     $ pytest -v -m "not webtest"
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -66,7 +66,7 @@ tests based on their module, class, method, or function name::
 
     $ pytest -v test_server.py::TestClass::test_method
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 5 items
@@ -79,7 +79,7 @@ You can also select on the class::
 
     $ pytest -v test_server.py::TestClass
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -92,7 +92,7 @@ Or select multiple nodes::
 
   $ pytest -v test_server.py::TestClass test_server.py::test_send_http
   ======= test session starts ========
-  platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
+  platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
   cachedir: .cache
   rootdir: $REGENDOC_TMPDIR, inifile: 
   collecting ... collected 8 items
@@ -130,7 +130,7 @@ select tests based on their names::
 
     $ pytest -v -k http  # running with the above defined example module
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -144,7 +144,7 @@ And you can also run all tests except the ones that match the keyword::
 
     $ pytest -k "not send_http" -v
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -160,7 +160,7 @@ Or to select "http" and "quick" tests::
 
     $ pytest -k "http or quick" -v
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -352,7 +352,7 @@ the test needs::
 
     $ pytest -E stage2
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     
@@ -364,7 +364,7 @@ and here is one that specifies exactly the environment needed::
 
     $ pytest -E stage1
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     
@@ -485,7 +485,7 @@ then you will see two test skipped and two executed tests as expected::
 
     $ pytest -rs # this option reports skip reasons
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
     
@@ -499,7 +499,7 @@ Note that if you specify a platform via the marker-command line option like this
 
     $ pytest -m linux2
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
     
@@ -551,7 +551,7 @@ We can now use the ``-m option`` to select one set::
 
   $ pytest -m interface --tb=short
   ======= test session starts ========
-  platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+  platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
   rootdir: $REGENDOC_TMPDIR, inifile: 
   collected 4 items
   
@@ -573,7 +573,7 @@ or to select both "event" and "interface" tests::
 
   $ pytest -m "interface or event" --tb=short
   ======= test session starts ========
-  platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+  platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
   rootdir: $REGENDOC_TMPDIR, inifile: 
   collected 4 items
   

doc/en/example/nonpython.rst

@@ -27,7 +27,7 @@ now execute the test specification::
 
     nonpython $ pytest test_simple.yml
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR/nonpython, inifile: 
     collected 2 items
     
@@ -59,7 +59,7 @@ consulted when reporting in ``verbose`` mode::
 
     nonpython $ pytest -v
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR/nonpython, inifile: 
     collecting ... collected 2 items
@@ -81,7 +81,7 @@ interesting to just look at the collection tree::
 
     nonpython $ pytest --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR/nonpython, inifile: 
     collected 2 items
     <YamlFile 'test_simple.yml'>

doc/en/example/parametrize.rst

@@ -130,7 +130,7 @@ objects, they are still using the default pytest representation::
 
     $ pytest test_time.py --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 6 items
     <Module 'test_time.py'>
@@ -181,7 +181,7 @@ this is a fully self-contained example which you can run with::
 
     $ pytest test_scenarios.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
     
@@ -194,7 +194,7 @@ If you just collect tests you'll also nicely see 'advanced' and 'basic' as varia
 
     $ pytest --collect-only test_scenarios.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
     <Module 'test_scenarios.py'>
@@ -259,7 +259,7 @@ Let's first see how it looks like at collection time::
 
     $ pytest test_backends.py --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     <Module 'test_backends.py'>
@@ -320,7 +320,7 @@ The result of this test will be successful::
 
     $ pytest test_indirect_list.py --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     <Module 'test_indirect_list.py'>
@@ -447,7 +447,7 @@ If you run this with reporting for skips enabled::
 
     $ pytest -rs test_module.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     

doc/en/example/pythoncollection.rst

@@ -117,7 +117,7 @@ then the test collection looks like this::
 
     $ pytest --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: pytest.ini
     collected 2 items
     <Module 'check_myapp.py'>
@@ -163,7 +163,7 @@ You can always peek at the collection tree without running tests like this::
 
     . $ pytest --collect-only pythoncollection.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: pytest.ini
     collected 3 items
     <Module 'CWD/pythoncollection.py'>
@@ -230,7 +230,7 @@ will be left out::
 
     $ pytest --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: pytest.ini
     collected 0 items
     

doc/en/example/reportingdemo.rst

@@ -11,7 +11,7 @@ get on the terminal - we are working on that)::
 
     assertion $ pytest failure_demo.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR/assertion, inifile: 
     collected 42 items
     
@@ -359,7 +359,7 @@ get on the terminal - we are working on that)::
     >   int(s)
     E   ValueError: invalid literal for int() with base 10: 'qwe'
     
-    <0-codegen $PYTHON_PREFIX/lib/python3.5/site-packages/_pytest/python.py:1189>:1: ValueError
+    <0-codegen $PYTHON_PREFIX/lib/python3.5/site-packages/_pytest/python.py:1190>:1: ValueError
     _______ TestRaises.test_raises_doesnt ________
     
     self = <failure_demo.TestRaises object at 0xdeadbeef>

doc/en/example/simple.rst

@@ -113,7 +113,7 @@ directory with the above conftest.py::
 
     $ pytest
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 0 items
     
@@ -164,13 +164,13 @@ and when running it will see a skipped "slow" test::
 
     $ pytest -rs    # "-rs" means report details on the little 's'
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     
     test_module.py .s
     ======= short test summary info ========
-    SKIP [1] test_module.py:14: need --runslow option to run
+    SKIP [1] test_module.py:13: need --runslow option to run
     
     ======= 1 passed, 1 skipped in 0.12 seconds ========
 
@@ -178,7 +178,7 @@ Or run it including the ``slow`` marked test::
 
     $ pytest --runslow
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     
@@ -302,7 +302,7 @@ which will add the string to the test header accordingly::
 
     $ pytest
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     project deps: mylib-1.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 0 items
@@ -327,7 +327,7 @@ which will add info only when run with "--v"::
 
     $ pytest -v
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     info1: did you know that ...
     did you?
@@ -340,7 +340,7 @@ and nothing when run plainly::
 
     $ pytest
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 0 items
     
@@ -374,7 +374,7 @@ Now we can profile which test functions execute the slowest::
 
     $ pytest --durations=3
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 3 items
     
@@ -440,7 +440,7 @@ If we run this::
 
     $ pytest -rx
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
     
@@ -519,7 +519,7 @@ We can run this::
 
     $ pytest
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 7 items
     
@@ -627,7 +627,7 @@ and run them::
 
     $ pytest test_module.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     
@@ -721,7 +721,7 @@ and run it::
 
     $ pytest -s test_module.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 3 items
     

doc/en/fixture.rst

@@ -70,7 +70,7 @@ marked ``smtp`` fixture function.  Running the test looks like this::
 
     $ pytest test_smtpsimple.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     
@@ -188,7 +188,7 @@ inspect what is going on and can now run the tests::
 
     $ pytest test_module.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     
@@ -516,7 +516,7 @@ Running the above tests results in the following test IDs being used::
 
    $ pytest --collect-only
    ======= test session starts ========
-   platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+   platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
    rootdir: $REGENDOC_TMPDIR, inifile: 
    collected 11 items
    <Module 'test_anothersmtp.py'>
@@ -569,7 +569,7 @@ Here we declare an ``app`` fixture which receives the previously defined
 
     $ pytest -v test_appsetup.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 2 items
@@ -638,7 +638,7 @@ Let's run the tests in verbose mode and with looking at the print-output::
 
     $ pytest -v -s test_module.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 8 items

doc/en/getting-started.rst

@@ -26,8 +26,7 @@ Installation::
 To check your installation has installed the correct version::
 
     $ pytest --version
-    This is pytest version 3.0.1, imported from $PYTHON_PREFIX/lib/python3.5/site-packages/pytest.py
-
+    This is pytest version 3.0.2, imported from $PYTHON_PREFIX/lib/python3.5/site-packages/pytest.py
 
 .. _`simpletest`:
 
@@ -47,7 +46,7 @@ That's it. You can execute the test function now::
 
     $ pytest
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     

doc/en/index.rst

@@ -25,22 +25,23 @@ To execute it::
 
     $ pytest
     ======= test session starts ========
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
+    rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
-
+    
     test_sample.py F
-
+    
     ======= FAILURES ========
     _______ test_answer ________
-
+    
         def test_answer():
     >       assert func(3) == 5
     E       assert 4 == 5
     E        +  where 4 = func(3)
-
+    
     test_sample.py:5: AssertionError
     ======= 1 failed in 0.12 seconds ========
 
-
 Due to ``pytest``'s detailed assertion introspection, only plain ``assert`` statements are used.
 See :ref:`Getting Started <getstarted>` for more examples.
 

doc/en/parametrize.rst

@@ -55,7 +55,7 @@ them in turn::
 
     $ pytest
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 3 items
     
@@ -103,7 +103,7 @@ Let's run this::
 
     $ pytest
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 3 items
     

doc/en/skipping.rst

@@ -224,7 +224,7 @@ Running it with the report-on-xfail option gives this output::
 
     example $ pytest -rx xfail_demo.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR/example, inifile: 
     collected 7 items
     

doc/en/tmpdir.rst

@@ -29,7 +29,7 @@ Running this would result in a passed test except for the last
 
     $ pytest test_tmpdir.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     

doc/en/unittest.rst

@@ -96,7 +96,7 @@ the ``self.db`` values in the traceback::
 
     $ pytest test_unittest_db.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.1, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.5.2, pytest-3.0.2, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items