bfa53811d3
regen docs and bump version to 2.5.0
2013-12-11 12:20:19 +01:00
fa80b8ad17
add changelog: fix issue319 - correctly show unicode in assertion errors. Many
...
thanks to Floris Bruynooghe for the complete PR. Also means
we depend on py>=1.4.19 now.
2013-12-11 11:28:06 +01:00
9dec27371d
change metadata
2013-10-24 15:08:50 +02:00
cf9d345382
fix unicode handling with junitxml, fixes issue368.
2013-10-21 16:54:25 +02:00
a5d4c20905
make "--runxfail" turn imperative pytest.xfail calls into no ops
...
(it already did neutralize pytest.mark.xfail markers)
2013-10-09 22:55:20 +02:00
0335c6d750
bump version to 2.3.3.dev1
2013-10-05 21:39:16 +02:00
19a76337a4
add pluginmanager.do_configure(config) as a link to
...
config.do_configure() for plugin-compatibility
add some more plugins to plugin-test.sh
2013-10-04 11:36:45 +02:00
cb65c56037
fix issue365 and depend on a newer py versions which uses colorama
...
for coloring instead of its own ctypes hacks.
2013-10-03 17:46:36 +02:00
071960250f
avoid "IOError: Bad Filedescriptor" on pytest shutdown by not closing
...
the internal dupped stdout (fix is slightly hand-wavy but work).
2013-10-02 12:39:01 +02:00
2b8f4214c3
2.4.1 release preps
2013-10-02 09:16:51 +02:00
895d52471b
bump version to dev again, new CHANGELOG section for 2.4.1.dev.
2013-10-01 12:51:52 +02:00
f9927e457b
bump version to 2.4.0
2013-10-01 10:43:36 +02:00
2c7d00579b
bump version, some windows test fixes, prevent logging from raising exceptions at the end (finally), add py25 to tox.ini.
2013-09-30 16:09:26 +02:00
48838727ae
bump version
2013-09-27 12:43:49 +02:00
94ee37cdb3
- fix issue181: --pdb now also works on collect errors. This was
...
implemented by a slight internal refactoring and the introduction
of a new hook ``pytest_exception_interact`` hook.
- fix issue341: introduce new experimental hook for IDEs/terminals to
intercept debugging: ``pytest_exception_interact(node, call, report)``.
2013-09-06 11:56:04 +02:00
57f997b0b4
strike distribute dep
2013-08-11 18:19:58 +02:00
7d86827b5e
ref #322 cleanup all teardown calling to only happen when setup succeeded.
...
don't use autouse fixtures for now because it would cause a proliferation
and overhead for the execution of every test. Rather introduce a
node.addfinalizer(fin) to attach a finalizer to the respective node
and call it from node.setup() functions if the setup phase succeeded
(i.e. there is no setup function or it finished successfully)
2013-08-02 09:52:40 +02:00
1023390f53
fix issue334: don't recommend distribute but setuptools everywhere, also remove implicit distribute_setup support from setup.py.
2013-08-01 09:42:44 +02:00
2a7c79dbf5
make genscript provide information as to compatibility
...
(now that argparse is a dependency on python2.6)
2013-07-26 08:59:31 +02:00
6d145ac93a
bump version
2013-07-24 11:16:19 +02:00
1280add047
SO-17664702: call fixture finalizers even if the fixture function
...
partially failed (finalizers would not always be called before)
2013-07-17 10:29:11 +02:00
60a53c75a6
some python2.5/3.3 fixes of Brianna's parametrize improvements
2013-07-16 15:43:20 +02:00
c4c966683c
fix issue323 - parametrize() of many module-scoped params
2013-06-28 12:57:10 +02:00
f9720a38fe
mention added support for setUpModule/tearDownModule detection, thanks Brian Okken.
2013-06-23 09:24:48 +02:00
c294a417bd
allow to specify parametrize inputs as a comma-separated string
...
add Wouter to changelog and to authors
2013-05-28 10:32:54 +02:00
55cd3d8bf3
bump version
2013-05-07 21:39:30 +02:00
bbd265184d
support boolean condition expressions in skipif/xfail
...
change documentation to prefer it over string expressions
2013-05-07 18:40:26 +02:00
77d2f6adde
fix issue245 by depending on py-1.4.14 which fixes py.io.dupfile
...
to not assume file.mode is present.
2013-05-07 10:54:05 +02:00
51688270ac
implemented as context managers. Thanks Andreas Pelme,
...
ladimir Keleshev.
fix issue245 by depending on the released py-1.4.14
which fixes py.io.dupfile to work with files with no
mode. Thanks Jason R. Coombs.
2013-05-07 10:53:31 +02:00
56aa9962fc
allow fixture functions to be implemented as context managers:
...
@pytest.fixture
def myfix():
# setup
yield 1
# teardown
2013-05-05 14:48:37 +02:00
8e41ef5776
bump version
2013-05-05 14:48:17 +02:00
8c7ae7f7a5
release 2.3.5 packaging
2013-04-30 12:26:30 +02:00
b2cb93e06d
allow re-running of a test item (as exercised by the
...
pytest-rerunfailures plugins) by re-initializing and removing
request/funcargs information in runtestprotocol() - which is a slightly
odd place to add funcarg-related functionality but it allows all
pytest_runtest_setup/teardown hooks to properly see a valid
request/funcarg content on test items.
2013-04-22 10:35:48 +02:00
712898cfe1
- add release announce
2013-03-28 10:21:03 +01:00
3785f1aae3
make dev pytest depend on installing from pypi.testrun.org
2013-02-14 11:57:32 +01:00
456731ed0f
fix issue257 assertion-triggered compilation of source ending in a
...
comment line doesn't blow up in python2.5 (fixed through py>=1.4.13.dev6)
2013-02-12 22:43:33 +01:00
1e94d900f2
fixed versioning, thanks Arfrever
2012-12-09 09:19:33 +01:00
3d79e7060e
allow to specify prefixes starting with "_" when
...
customizing python_functions test discovery. (thanks Graham Horler)
2012-11-28 09:23:36 +01:00
68786a6434
fix bug where using capsys with pytest.set_trace() in a test
...
function would break when looking at capsys.readouterr()
2012-11-21 20:43:31 +01:00
03445913e0
reanme README.txt to README.rst
2012-11-20 14:37:39 +01:00
8580058ffb
move long description into README
2012-11-20 14:24:26 +01:00
1c9ef2443f
bump version, fix -k option help
2012-11-20 14:20:39 +01:00
b5955c5979
fix version number, final fixes
2012-11-20 14:01:31 +01:00
765b053984
bump version, add announcement, regen docs
2012-11-20 13:42:00 +01:00
d66ff7e63e
fix autouse invocation (off-by-one error), relates to issue in moinmoin test suite
2012-11-19 22:17:55 +01:00
b940ed11a0
fix issue226 - LIFO ordering for fixture-added teardowns
2012-11-16 10:03:51 +01:00
c64c567b75
fix issue224 - invocations with >256 char arguments now work
2012-11-12 10:15:43 +01:00
4ac465acfb
allow to pass expressions to "-k" option, just like with the "-m" option
2012-11-09 12:29:33 +01:00
a4909a0ae4
allow to dynamically define markers (e.g. during pytest_collection_modifyitems)
2012-11-09 12:07:41 +01:00
476d210d09
prolong workaround for jython AST bug http://bugs.jython.org/issue1497
...
to make pytest work for post-2.5.1 jython versions
2012-11-07 10:05:39 +01:00
eedc4242ef
mention that jython-2.5.1 works
2012-11-07 09:35:49 +01:00
d6f10d502c
fix py31 compat, amend setup.py long description
2012-11-06 15:36:11 +01:00
65d6ebe7d1
bump to 2.3.3, add release announce
2012-11-06 14:41:10 +01:00
33cd414420
fix issue127 improve pytest_addoption docs, add new config.getoption(name) method for consistency.
2012-11-06 14:09:12 +01:00
dba2a8bc64
fix issue217 - to support @mock.patch with pytest funcarg-fixtures, also split out python integration tests into python/integration.py and fix nose/mark tests
2012-11-06 11:04:11 +01:00
f203401964
amend changelog entries
2012-11-06 09:27:58 +01:00
c64699bba6
fix issue219 - add trove classifiers for py24-py33
2012-11-06 09:14:41 +01:00
002c5072af
addresses issue209 - avoid error messages from pip on python2.4 related to file, however, never be imported with this interpreter
2012-11-06 09:08:54 +01:00
d5ad91c64f
fix issue209 - depend on pylib dev version which again supports python2.4
2012-11-05 12:21:58 +01:00
fb173a97a8
extended - fix issue214 - ignore attribute-access errors with objects in test modules that can blow up (for example flask's request object)
2012-10-31 17:00:55 +01:00
6ad16936bb
bump version to 2.3.2, regen docs and changelog
2012-10-25 13:48:31 +02:00
bcb8dc71d2
fix issue208 and fix issue29 - avoid long pauses in traceback printing
...
by using the new getstatementrange() code of the py lib which uses
AST-parsing rather than the previous heuristic which had O(n^2) complexity
(with n = len(sourcelines))
- require new (in-dev) py version to
2012-10-25 12:08:11 +02:00
2637326782
improve support for trial a bit more: don't run trial's empty TestCase.runTest() method
2012-10-22 19:22:01 +02:00
aa79c0a4b9
fix unittest emulation: TestCase.runTest is now ignored
...
if there are test* methods.
2012-10-22 16:25:09 +02:00
05c86aeb28
make sure ihook uses a node's fspath - important for hooks
...
e.g. during a Module's collect to pick up conftest.py files
residing in the same dir
2012-10-22 16:12:22 +02:00
f28f073c7c
fix teardown-ordering for parametrized setups/teardowns
2012-10-22 12:16:54 +02:00
036557ac18
fix issue206 - unset PYTHONDONTWRITEBYTECODE in assertrewrite test
2012-10-22 11:14:18 +02:00
97f03edcd6
fix issue205 - nested conftest to pickup pycollect_makemodule - relates to the two
...
reports of a failing doc/en/example/py2py3.
2012-10-22 10:17:50 +02:00
d55fc611c4
properly handle non-existent PYTHONPATH
2012-10-20 17:39:15 +02:00
720fe3405b
allow to run self-tests with "python setup.py test" for pytest tests itself
2012-10-20 17:32:03 +02:00
c894b2b459
add tox.ini to distribution
2012-10-20 17:08:02 +02:00
289ee1c6ea
prepare a 2.3.1
2012-10-20 14:05:33 +02:00
9ed127b5da
fix issue203 - fixture functions with a scope=function should have a "self" that points to the actual instance with which the test functions run.
2012-10-20 09:59:20 +02:00
fae34ca5e3
proper version number (2.3.1.dev*)
2012-10-19 16:00:29 +02:00
0852e84d9f
skip pexpect using tests on freebsd
2012-10-19 15:59:29 +02:00
dca5fa2241
fixing links for 2.3 release, and fixing a windows32 failure on py3
2012-10-19 10:53:28 +02:00
586befb945
make usefixtures appear in py.test --markers output
2012-10-19 10:17:13 +02:00
b0b6695538
improve automatic id generation for parametrized tests
2012-10-19 10:07:13 +02:00
024df6e00b
some more finalization of docs
2012-10-19 10:07:11 +02:00
64544bee1a
fix trial tests
2012-10-18 15:09:20 +02:00
7c8755cc89
refine docs, fix a marker/keywords bit, and add a test that request.keywords points to node.keywords.
2012-10-18 15:06:55 +02:00
7d747a1cde
remove .markers attribute which was added in development and after 2.2.4
...
so never released. Rather extend keywords to also exist on nodes. Assigning
to node.keywords will make the value appear on all subchildren's
keywords.
2012-10-18 13:52:32 +02:00
67de2c53ac
fix issue198 - detection of fixtures from conftest.py files in deeper nested dir structures with certain invocations
2012-10-17 13:42:40 +02:00
20849a44f5
improve --fixtures output with per-plugin grouping and hiding underscore names in non-verbose mode, re-introduce --funcargs for compatibiliy
2012-10-17 12:57:05 +02:00
98513b995a
simplify/integrate fixturemapper into FixtureManager
...
also fix jstests test failures
2012-10-17 11:20:45 +02:00
cc2337af3a
refine parsefactories interface, fix two_classes test originally reported by Alex Okrushko, also add a few more tests to make sure autouse-fixtures are properly distinguished
2012-10-16 16:13:12 +02:00
f5d796b093
improve docs further, refine unittest docs, rename ``autoactive`` to ``autouse``
...
to better match ``@pytest.mark.usefixtures`` naming.
2012-10-12 14:52:36 +02:00
6eec2f5893
make tmpdir fixture always return a realpath()ed tmpdir and make a note
...
about it in the changed test. Currently, i don't see a reason why this
is a bad idea (tm)
2012-10-11 13:05:16 +02:00
0594265adc
fix output of --fixtures for @pytest.fixture defined functions.
2012-10-09 16:49:04 +02:00
d630d02c5b
remove pytest.setup usage
2012-10-08 08:34:21 +02:00
cda84fb566
- allow to use fixtures directly, i.e. without ()
...
- also allow scope to be determined by a dynamic function
2012-10-06 21:03:55 +02:00
4cbb2ab3b3
bump version
2012-10-05 14:35:16 +02:00
7bc7a9b702
add py33 to tox.ini, report pypy-1.9 as working as well
2012-10-01 10:31:04 +02:00
dbe66f468a
ensure proper calling of finalizers in case of parametrization on classes
2012-09-26 12:24:04 +02:00
465cfff6f9
don't call nose' setup methods if they are marked with pytest.setup
2012-09-22 00:23:36 +02:00
738f14a48a
improve the parametrization scenario example to sort by id, rather than by file-order, see also: http://stackoverflow.com/questions/12521924/pytest-running-scenarios-in-the-correct-order-in-the-class
2012-09-21 09:39:54 +02:00
22dc47d9f9
refine internal test support for unicode-related bits (used by a test in pytest-pep8)
2012-09-20 10:57:23 +02:00
a7c6688bd6
implement full @pytest.setup function unittest.TestCase interaction
2012-09-18 10:54:12 +02:00
a94bb0a8bb
introduce a new "markers" attribute to nodes and the request object. It is
...
a dynamic class making holdin
2012-09-17 17:32:23 +02:00
41ad7dbae1
fix issue185 monkeypatching time.time does not cause pytest to fail
2012-09-01 09:58:10 +02:00
dd268c1b2b
improve error representation for missing factory definitions
...
in recursive funcarg reconstruction
2012-08-08 11:48:53 +02:00
172505f703
fix/consolidate --junitxml=path construction with relative pathes
2012-08-04 10:33:43 +02:00
46dc7eeacb
move pytest.mark.factory/setup to pytest.factory/setup, as per flub 's suggestion
2012-08-02 12:41:46 +02:00
5fd84c35dd
reshuffle docs, try to get a bit closer to release-relevant documentation
2012-08-01 14:52:51 +02:00
449b55cc70
- enhance ordering of tests using parametrized resources
...
- introduce a refined way to perform finalization for setup functions
which does not use cached_setup() anymore
2012-08-01 09:07:32 +02:00
d68c65b493
minimize active parametrized non-function scoped resources by
...
- re-ordering at collection time
- modifying setup/teardown
2012-07-30 10:46:03 +02:00
fa61927c6b
introduce @pytest.mark.setup decorated function,
...
extend newexamples.txt and draft a V4 resources API doc.
2012-07-24 12:10:04 +02:00
6b0f0adf5b
implement a scope/parametrized examples using the so-far new features
...
also fix a bug with scoping/parametrization
2012-07-20 14:16:50 +02:00
ecec653e98
fix issue151 - heuristcally lookup conftest files on all command line arguments, not just the first existing dir/file
...
you can install the corresponding pytest-2.3.dev2 via
pip install -i http:/pypi.testrun.org -U pytest
2012-06-26 21:56:03 +02:00
91b6f2bda8
mid-scale refactoring to make request API available directly on items.
...
This commit was slightly tricky because i want to backward
compatibility especially for the oejskit plugin which
uses Funcarg-filling for non-Function objects.
2012-06-25 17:35:33 +02:00
6e0c30d67d
fix skip/xfail confusion, reported and discussed on
...
http://stackoverflow.com/questions/11105828/in-py-test-when-i-explicitly-skip-a-test-that-is-marked-as-xfail-how-can-i-get
2012-06-23 11:32:32 +02:00
ccc04b9fc4
some refinements to reporting and hook order
2012-06-21 11:07:22 +02:00
b2e87ce027
change pluginmanager.register API to raise ValueError if the plugin object or the name is already registered
2012-06-16 21:29:04 +02:00
3f17784386
fix issue128 - show captured output when capsys/capfd are in use
2012-06-03 21:01:27 +02:00
6c7ea8191f
fix wrong release version
2012-05-17 15:44:18 +02:00
0362aaba5a
require py-1.4.8
2012-05-17 08:47:50 +02:00
948dea8bb4
bump version to next release
2012-05-17 08:46:49 +02:00
6dd8405aed
bump version
2012-05-10 00:34:47 +02:00
58933aac2a
try to better handle @unittest.expectedFailure decorator
2012-03-19 22:53:52 -07:00
e643e99586
bump version number to dev version
2012-03-19 08:53:08 -07:00
4d21274a29
release 2.2.3 to fix package contents (2.2.2 contained too many files)
2012-02-05 23:38:31 -05:00
83505b790d
preparing release 2.2.2
2012-02-05 17:32:01 -05:00
dfa273dc25
fix issue177 - actually perform session scope finalization
2012-02-01 08:52:34 -05:00
303f49a5ad
bump version, mention "mp" also in the docs and changelog
2012-01-06 20:37:18 +00:00
c126cac98d
fix unittest/marker integration
2011-12-28 16:47:08 +00:00
e3a8b1e062
bump version
2011-12-28 15:49:35 +00:00
f2791988f9
fix issue102: report more useful errors and hints for when a
...
test directory was renamed and some pyc/__pycache__ remain
2011-12-20 12:20:59 +00:00
d5c3265763
fix issue101: wrong args to unittest.TestCase test function now
...
produce better output
2011-12-18 23:01:39 +00:00
40187ec9bb
robustify monkeypatch
2011-12-16 22:41:23 +00:00
3a3f69372f
regen docs, prepare release 2.2.1
2011-12-16 10:38:34 +00:00
82ba764bb6
fix unorderable types as reported by Ralf Schmitt
2011-12-14 10:56:51 +00:00
94e31e414a
bump version depend on new pylib
2011-12-12 12:45:28 +00:00
a94a6b4282
fix issue99 - internalerror with --resultlog now produce better output.
...
the fix depends on another change in the py lib which unifies
the output for native and non-native traceback formatting styles
2011-12-10 08:49:21 +00:00
8307270cec
yay! now that we have perfect teardowns we don't need some ugly internal hooks anymore.
2011-12-02 21:00:21 +00:00
c4fe622b82
fix issue93 - avoid "delayed" teardowns for distributed testing by
...
simplifying handling of teardowns.
2011-12-02 21:00:19 +00:00
826d1e6153
fix docstring for setup.py
2011-11-25 21:34:05 +00:00
6b4e6eee09
improve release announcement, shift and fix examples a bit. Bump version to 2.2.0
2011-11-18 18:32:11 +00:00
7bb7d1205c
finally fixing a bug that resulted in sometimes-failing duration tests (doh)
2011-11-18 17:35:23 +00:00
a1d41c6811
remove a hack that isn't needed because runtestprotocol now memorizes pending teardowns and thus dist-testing has "exact" teardowns as well
2011-11-18 16:58:21 +00:00
a5e7b2760d
fix issue90 - perform teardown after its actual test function/item. This is implemented by modifying the runtestprotocol to remember "pending" teardowns and call them before the setup of the next item.
2011-11-18 16:01:29 +00:00
ec0565fac5
introduce metafunc.parametrize() and @pytest.mark.parametrize with examples. deprecate metafunc.addcall()
2011-11-17 11:09:21 +00:00
36c42b5c15
introduce a new -m mark_expression option
2011-11-11 23:02:06 +00:00
bc8ee95e72
add ini-file "markers" option and a cmdline option "--markers" to show defined markers. Add "skipif", "xfail" etc. to the set of builtin markers shown with the --markers option.
2011-11-11 22:56:11 +00:00
99a1188287
simplify durations output, no percentage, no "remaining" bits
2011-11-08 20:57:19 +00:00
0b18b6094e
fix duration option in case of collection errors
2011-11-08 19:00:25 +00:00
ae53d04780
fix py3 compat
2011-11-08 18:37:08 +00:00
29bf205f3a
make --durations also show the execution times of setup/teardown calls. This requires a slight incompatibility - pytest_runtest_logreport now sees setup/teardown reports even if the tests passed.
2011-11-08 17:53:46 +00:00
3b9fd3abd8
introduce --durations=N showing slowest test executions
2011-11-08 17:20:56 +00:00
a2f4a11301
refine lsof/FD leakage testing and rework test setup and some of pytest own tests. Note that the actual diff to non-test code is small. Also remove some redundant tests (introduced by a copy-paste-error apparently in test_mark.py).
2011-11-07 18:08:41 +00:00
077c468589
don't remove symlinks from temporary directory path - should help with some standard OSX setups
2011-11-06 19:34:02 +00:00
holger krekel