From d8f89448ba47ed6f9f05d25053eb159d77796359 Mon Sep 17 00:00:00 2001 From: likailong Date: Fri, 2 Apr 2021 08:18:25 +0800 Subject: [PATCH] IssueNo: #I3EPPI Description: platform directory refactoring Sig: kernel Feature or Bugfix: Feature Binary Source: No --- arch/arm/Kconfig | 26 ++ arch/arm/arm.mk | 3 + .../arm/arm}/include/hal_timer.h | 0 .../arm/arm/src}/arm_generic_timer.c | 0 arch/arm/arm/src/los_hw_tick.c | 4 +- arch/arm/gic/Makefile | 48 ++ .../arm/interrupt => arch/arm}/gic/gic_v2.c | 1 + .../arm/interrupt => arch/arm}/gic/gic_v3.c | 1 + .../hw => arch/arm}/include/gic_common.h | 0 {platform/hw => arch/arm}/include/gic_v3.h | 0 {platform => arch/arm}/include/hal_hwi.h | 0 platform/Kconfig | 20 - platform/Makefile | 17 +- platform/bsp.mk | 43 +- .../arm/timer/arm_private/arm_private_timer.c | 141 ------ platform/hw/hisoc/hrtimer/hrtimer.c | 111 ----- platform/hw/hisoc/timer/timer.c | 409 ------------------ platform/uart/amba-pl011-lagacy/uart.c | 304 ------------- platform/uart/amba_pl011/amba_pl011.c | 203 --------- platform/uart/amba_pl011/amba_pl011.h | 68 --- platform/uart/dw-3.0.8a/uart.c | 215 --------- 21 files changed, 83 insertions(+), 1531 deletions(-) rename {platform => arch/arm/arm}/include/hal_timer.h (100%) rename {platform/hw/arm/timer/arm_generic => arch/arm/arm/src}/arm_generic_timer.c (100%) mode change 100755 => 100644 create mode 100755 arch/arm/gic/Makefile rename {platform/hw/arm/interrupt => arch/arm}/gic/gic_v2.c (99%) mode change 100755 => 100644 rename {platform/hw/arm/interrupt => arch/arm}/gic/gic_v3.c (99%) mode change 100755 => 100644 rename {platform/hw => arch/arm}/include/gic_common.h (100%) rename {platform/hw => arch/arm}/include/gic_v3.h (100%) mode change 100755 => 100644 rename {platform => arch/arm}/include/hal_hwi.h (100%) delete mode 100644 platform/hw/arm/timer/arm_private/arm_private_timer.c delete mode 100644 platform/hw/hisoc/hrtimer/hrtimer.c delete mode 100644 platform/hw/hisoc/timer/timer.c delete mode 100644 platform/uart/amba-pl011-lagacy/uart.c delete mode 100755 platform/uart/amba_pl011/amba_pl011.c delete mode 100644 platform/uart/amba_pl011/amba_pl011.h delete mode 100644 platform/uart/dw-3.0.8a/uart.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 59959f81..f7775a1e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -75,3 +75,29 @@ config ARCH_CORTEX_A7 config ARCH_CPU string default "cortex-a7" if ARCH_CORTEX_A7 + +# +# Supported GIC version +# + +choice + prompt "GIC version" + default PLATFORM_BSP_GIC_V2 + help + Interrupt Controller. + +config PLATFORM_BSP_GIC_V2 + bool "GIC Version 2" + help + This GIC(General Interrupt Controller) version 2 driver is compatatble with + GIC version 1 and version 2. + +config PLATFORM_BSP_GIC_V3 + bool "GIC Version 3" + depends on ARCH_ARM_V8A || ARCH_ARM_V8R + help + General Interrupt Controller version 3. + +endchoice + + diff --git a/arch/arm/arm.mk b/arch/arm/arm.mk index 6e765e9e..920b8026 100644 --- a/arch/arm/arm.mk +++ b/arch/arm/arm.mk @@ -42,7 +42,10 @@ LITEOS_ARCH_ARM := endif LITEOS_BASELIB += -l$(LOSCFG_ARCH_CPU) +LITEOS_BASELIB += -lgic + LIB_SUBDIRS += arch/arm/$(LITEOS_ARCH_ARM) +LIB_SUBDIRS += arch/arm/gic # CPU compile options ifeq ($(LOSCFG_ARCH_ARM_AARCH64), y) diff --git a/platform/include/hal_timer.h b/arch/arm/arm/include/hal_timer.h similarity index 100% rename from platform/include/hal_timer.h rename to arch/arm/arm/include/hal_timer.h diff --git a/platform/hw/arm/timer/arm_generic/arm_generic_timer.c b/arch/arm/arm/src/arm_generic_timer.c old mode 100755 new mode 100644 similarity index 100% rename from platform/hw/arm/timer/arm_generic/arm_generic_timer.c rename to arch/arm/arm/src/arm_generic_timer.c diff --git a/arch/arm/arm/src/los_hw_tick.c b/arch/arm/arm/src/los_hw_tick.c index b53bdfa2..f9972500 100644 --- a/arch/arm/arm/src/los_hw_tick.c +++ b/arch/arm/arm/src/los_hw_tick.c @@ -65,9 +65,9 @@ LITE_OS_SEC_TEXT_MINOR VOID LOS_GetCpuCycle(UINT32 *highCnt, UINT32 *lowCnt) LITE_OS_SEC_TEXT_MINOR UINT64 LOS_CurrNanosec(VOID) { - DOUBLE nanos; + UINT64 nanos; - nanos = (DOUBLE)HalClockGetCycles() * OS_SYS_NS_PER_SECOND / g_sysClock; + nanos = (UINT64)HalClockGetCycles() * 20; return (UINT64)nanos; } diff --git a/arch/arm/gic/Makefile b/arch/arm/gic/Makefile new file mode 100755 index 00000000..3a14bc14 --- /dev/null +++ b/arch/arm/gic/Makefile @@ -0,0 +1,48 @@ +# Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved. +# Copyright (c) 2020-2021 Huawei Device Co., Ltd. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without modification, +# are permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, this list of +# conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, this list +# of conditions and the following disclaimer in the documentation and/or other materials +# provided with the distribution. +# +# 3. Neither the name of the copyright holder nor the names of its contributors may be used +# to endorse or promote products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, +# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +include $(LITEOSTOPDIR)/config.mk + +MODULE_NAME := $(notdir $(shell pwd)) + +# LOCAL_SRCS := $(wildcard *.c) + +ifeq ($(LOSCFG_PLATFORM_BSP_GIC_V2), y) +LOCAL_SRCS := gic_v2.c +else ifeq ($(LOSCFG_PLATFORM_BSP_GIC_V3), y) +LOCAL_SRCS := gic_v3.c +endif + +LOCAL_INCLUDE := \ + -I $(LITEOSTOPDIR)/kernel/base/include \ + -I $(LITEOSTOPDIR)/arch/arm/include \ + -I $(LITEOSTOPDIR)/arch/arm/arm/src/include \ + +LOCAL_FLAGS := $(LOCAL_INCLUDE) +include $(MODULE) diff --git a/platform/hw/arm/interrupt/gic/gic_v2.c b/arch/arm/gic/gic_v2.c old mode 100755 new mode 100644 similarity index 99% rename from platform/hw/arm/interrupt/gic/gic_v2.c rename to arch/arm/gic/gic_v2.c index 463d20de..1b30d2db --- a/platform/hw/arm/interrupt/gic/gic_v2.c +++ b/arch/arm/gic/gic_v2.c @@ -30,6 +30,7 @@ */ #include "gic_common.h" +#include "los_hwi.h" #include "los_hwi_pri.h" #include "los_mp.h" diff --git a/platform/hw/arm/interrupt/gic/gic_v3.c b/arch/arm/gic/gic_v3.c old mode 100755 new mode 100644 similarity index 99% rename from platform/hw/arm/interrupt/gic/gic_v3.c rename to arch/arm/gic/gic_v3.c index 8451f108..61049f38 --- a/platform/hw/arm/interrupt/gic/gic_v3.c +++ b/arch/arm/gic/gic_v3.c @@ -32,6 +32,7 @@ #include "gic_common.h" #include "gic_v3.h" #include "los_typedef.h" +#include "los_hwi.h" #include "los_hwi_pri.h" #include "los_mp.h" diff --git a/platform/hw/include/gic_common.h b/arch/arm/include/gic_common.h similarity index 100% rename from platform/hw/include/gic_common.h rename to arch/arm/include/gic_common.h diff --git a/platform/hw/include/gic_v3.h b/arch/arm/include/gic_v3.h old mode 100755 new mode 100644 similarity index 100% rename from platform/hw/include/gic_v3.h rename to arch/arm/include/gic_v3.h diff --git a/platform/include/hal_hwi.h b/arch/arm/include/hal_hwi.h similarity index 100% rename from platform/include/hal_hwi.h rename to arch/arm/include/hal_hwi.h diff --git a/platform/Kconfig b/platform/Kconfig index 4982bcac..5f6e78c5 100755 --- a/platform/Kconfig +++ b/platform/Kconfig @@ -74,26 +74,6 @@ config TEE_ENABLE help ENABLE teeos in platform -choice - prompt "IRQCHIP" - default PLATFORM_BSP_GIC_V2 - help - Interrupt Controller. - -config PLATFORM_BSP_GIC_V2 - bool "GIC Version 2" - help - This GIC(General Interrupt Controller) version 2 driver is compatatble with - GIC version 1 and version 2. - -config PLATFORM_BSP_GIC_V3 - bool "GIC Version 3" - depends on ARCH_ARM_V8A || ARCH_ARM_V8R - help - General Interrupt Controller version 3. - -endchoice - config HRTIMER_ENABLE bool "HR TIMER enable" default y diff --git a/platform/Makefile b/platform/Makefile index 33e81e1a..940337fd 100755 --- a/platform/Makefile +++ b/platform/Makefile @@ -31,22 +31,11 @@ include $(LITEOSTOPDIR)/config.mk MODULE_NAME := bsp -LOCAL_SRCS = $(wildcard $(HWI_SRC)/*.c) \ - $(wildcard $(TIMER_SRC)/*.c) \ - $(wildcard $(UART_SRC)/*.c) \ - $(wildcard ./main.c) - -ifeq ($(LOSCFG_HRTIMER_ENABLE), y) -LOCAL_SRCS += $(wildcard $(HRTIMER_SRC)/*.c) -endif +LOCAL_SRCS = $(wildcard ./main.c) LOCAL_INCLUDE += -I $(LITEOSTOPDIR)/compat/posix/src \ -I $(LITEOSTOPDIR)/bsd/dev/random -MAIN_PLATFORMS := $(LOSCFG_PLATFORM_HI3518EV300) \ - $(LOSCFG_PLATFORM_HI3516DV300) \ - $(LOSCFG_PLATFORM_QEMU_ARM_VIRT_CA7) -ifeq ($(findstring y, $(MAIN_PLATFORMS)), y) LOCAL_SRCS += $(wildcard ../kernel/common/*.c) LOCAL_SRCS := $(filter-out ../kernel/common/los_rootfs.c, $(LOCAL_SRCS)) ifneq ($(LOSCFG_FS_VFS), y) @@ -55,10 +44,6 @@ endif ifneq ($(LOSCFG_BASE_CORE_HILOG), y) LOCAL_SRCS := $(filter-out ../kernel/common/los_hilog.c, $(LOCAL_SRCS)) endif -else -LOCAL_SRCS += $(wildcard ../kernel/common/los_config.c) -LOCAL_SRCS += $(wildcard ../kernel/common/los_printf.c) -endif ifeq ($(LOSCFG_KERNEL_TICKLESS), y) LOCAL_INCLUDE += -I $(LITEOSTOPDIR)/kernel/extended/include diff --git a/platform/bsp.mk b/platform/bsp.mk index 7f6640df..c937f81a 100755 --- a/platform/bsp.mk +++ b/platform/bsp.mk @@ -33,45 +33,13 @@ MMU_SRC := NET_SRC := TIMER_SRC := HRTIMER_SRC := -UART_SRC := USB_SRC := ############################# HI3516DV300 Options################################# -ifeq ($(LOSCFG_PLATFORM_HI3516DV300), y) - HWI_TYPE := arm/interrupt/gic - TIMER_TYPE := arm/timer/arm_generic - HRTIMER_TYPE := hisoc/hrtimer - NET_TYPE := hieth - UART_TYPE := amba_pl011 - USB_TYPE := usb3.0_hi3516dv300 - LITEOS_CMACRO_TEST += -DTEST3516DV300 ########################## HI3518EV300 Options############################## -else ifeq ($(LOSCFG_PLATFORM_HI3518EV300), y) - HWI_TYPE := arm/interrupt/gic - TIMER_TYPE := hisoc/timer - HRTIMER_TYPE := hisoc/hrtimer - NET_TYPE := hieth - UART_TYPE := amba_pl011 - USB_TYPE := usb3.0_hi3518ev300 - LITEOS_CMACRO_TEST += -DTEST3518EV300 ########################## Qemu ARM Virt Options############################## -else ifeq ($(LOSCFG_PLATFORM_QEMU_ARM_VIRT_CA7), y) - HWI_TYPE := arm/interrupt/gic - TIMER_TYPE := arm/timer/arm_generic - UART_TYPE := amba_pl011 - -endif - -ifeq ($(LOSCFG_HRTIMER_ENABLE), y) -HRTIMER_SRC := hw/$(HRTIMER_TYPE) -endif -HWI_SRC := hw/$(HWI_TYPE) -TIMER_SRC := hw/$(TIMER_TYPE) -NET_SRC := net/$(NET_TYPE) -UART_SRC := uart/$(UART_TYPE) -USB_SRC := usb/$(USB_TYPE) LITEOS_BASELIB += -lbsp @@ -84,16 +52,7 @@ PLATFORM_INCLUDE := -I $(LITEOSTOPDIR)/../../$(LOSCFG_BOARD_CONFIG_PATH) \ -I $(PLATFORM_BSP_BASE)/../kernel/common \ -I $(PLATFORM_BSP_BASE)/../../../drivers/liteos/platform/pm \ -I $(PLATFORM_BSP_BASE)/hw/include \ - -I $(PLATFORM_BSP_BASE)/include \ - -I $(PLATFORM_BSP_BASE)/$(UART_SRC) - -ifeq ($(LOSCFG_PLATFORM_PATCHFS), y) - PLATFORM_INCLUDE += -I $(PLATFORM_BSP_BASE)/../kernel/common/patchfs -endif - -ifeq ($(LOSCFG_FS_ZPFS), y) - PLATFORM_INCLUDE += -I $(PLATFORM_BSP_BASE)/../fs/zpfs -endif + -I $(PLATFORM_BSP_BASE)/include # #-include $(LITEOSTOPDIR)/platform/bsp/board/$(LITEOS_PLATFORM)/board.mk diff --git a/platform/hw/arm/timer/arm_private/arm_private_timer.c b/platform/hw/arm/timer/arm_private/arm_private_timer.c deleted file mode 100644 index c21dff1f..00000000 --- a/platform/hw/arm/timer/arm_private/arm_private_timer.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved. - * Copyright (c) 2020-2021 Huawei Device Co., Ltd. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this list of - * conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, this list - * of conditions and the following disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its contributors may be used - * to endorse or promote products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; - * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF - * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "asm/platform.h" -#include "los_hwi.h" -#include "los_sched_pri.h" -#include "los_tick_pri.h" - -#define OS_CYCLE_PER_TICK (TIMER_FREQ / LOSCFG_BASE_CORE_TICK_PER_SECOND) - -typedef struct { - UINT32 load; /* Private Timer Load Register */ - UINT32 count; /* Private Timer Counter Register */ - UINT32 control; /* Private Timer Control Register */ - UINT32 intStatus; /* Private Timer Interrupt Status Register */ -} PrivateTimer; - -typedef struct { - UINT32 low; /* Global Timer Counter Registers, low bits */ - UINT32 high; /* Global Timer Counter Registers, high bits */ - UINT32 control; /* Global Timer Control Register */ - UINT32 intStatus; /* Global Timer Interrupt Status Register */ - UINT32 compareLow; /* Comparator Value Registers, low bits */ - UINT32 compareHigh; /* Comparator Value Registers, high bits */ - UINT32 increment; /* Auto-increment Register */ -} GlobalTimer; - -PrivateTimer *g_privateTimer = (PrivateTimer *)PRVTIMER_BASE_ADDR; -GlobalTimer *g_globalTimer = (GlobalTimer *)GTIMER_BASE_ADDR; - -UINT32 HalClockFreqRead(VOID) -{ - return TIMER_FREQ; -} - -VOID HalClockFreqWrite(UINT32 freq) -{ - PRINT_WARN("private timer does not support setting frequency\n"); -} - -VOID HalClockStart(VOID) -{ - UINT32 ret = OsSchedSetTickTimerType(32); /* 32 bit tick timer */ - if (ret != LOS_OK) { - return; - } - - HalIrqUnmask(PRVTIMER_INT_NUM); - - g_privateTimer->load = OS_CYCLE_PER_TICK; - g_privateTimer->control = 0x06; /* IAE bits = 110, not eanbled yet */ - g_privateTimer->control |= 0x01; /* enable private timer */ -} - -VOID OsTickEntry(VOID) -{ - OsTickHandler(); - - /* clear private timer */ - g_privateTimer->intStatus = 0x01; -} - -VOID HalClockInit(VOID) -{ - UINT32 ret; - - ret = LOS_HwiCreate(PRVTIMER_INT_NUM, 0xa0, 0, OsTickEntry, NULL); - if (ret != LOS_OK) { - PRINT_ERR("%s, %d create tick irq failed, ret:0x%x\n", __FUNCTION__, __LINE__, ret); - } -} - -UINT64 HalClockGetCycles(VOID) -{ - UINT32 low, high; - - do { - high = g_globalTimer->high; - low = g_globalTimer->low; - } while (g_globalTimer->high != high); - - /* combine high and low into 8 bytes cycles */ - return (((UINT64)high << 32) | low); -} - -VOID HalDelayUs(UINT32 usecs) -{ - UINT64 tmo = LOS_CurrNanosec() + usecs * 1000; - - while (LOS_CurrNanosec() < tmo) { - __asm__ volatile ("nop"); - } -} - -UINT64 hi_sched_clock(VOID) -{ - return LOS_CurrNanosec(); -} - -UINT32 HalClockGetTickTimerCycles(VOID) -{ - return g_privateTimer->count; -} - -VOID HalClockTickTimerReload(UINT64 period) -{ - HalIrqUnmask(PRVTIMER_INT_NUM); - - /* set control counter regs to defaults */ - g_privateTimer->load = (UINT32)period; - g_privateTimer->control = 0x06; /* IAE bits = 110, not eanbled yet */ - g_privateTimer->control |= 0x01; /* reenable private timer */ -} diff --git a/platform/hw/hisoc/hrtimer/hrtimer.c b/platform/hw/hisoc/hrtimer/hrtimer.c deleted file mode 100644 index c85b5980..00000000 --- a/platform/hw/hisoc/hrtimer/hrtimer.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved. - * Copyright (c) 2020-2021 Huawei Device Co., Ltd. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this list of - * conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, this list - * of conditions and the following disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its contributors may be used - * to endorse or promote products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; - * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF - * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "los_hwi.h" - -#ifdef __cplusplus -#if __cplusplus -extern "C" { -#endif /* __cplusplus */ -#endif /* __cplusplus */ - -#define TIMER_ENABLE_BIT 7 -#define TIMER_COUNTING_MODE_BIT 6 -#define TIMER_INTERRUPT_ENABLE_BIT 5 -#define TIMER_SIZE_SELECT_BIT 1 -#define TIMER_ONESHOT_BIT 0 - -VOID HrtimerClockIrqClear(VOID) -{ - WRITE_UINT32(0x1, HRTIMER_TIMER_REG_BASE + TIMER_INT_CLR); -} - -VOID HrtimerClockInit(VOID) -{ - UINT32 temp; - - /* enable timer here */ - READ_UINT32(temp, SYS_CTRL_REG_BASE + REG_SC_CTRL); - temp |= HRTIMER_TIMER_ENABLE; - WRITE_UINT32(temp, SYS_CTRL_REG_BASE + REG_SC_CTRL); - - /* disable timer */ - WRITE_UINT32(0x0, HRTIMER_TIMER_REG_BASE + TIMER_CONTROL); - - /* - * Timing mode:oneshot [bit 0 set as 1] - * timersize:32bits [bit 1 set as 1] - * ticking with 1/1 clock frequency [bit 3 set as 0, bit 2 set as 0] - * interrupt enabled [bit 5 set as 1] - * timing circulary [bit 6 set as 1] - */ - temp = (1U << TIMER_COUNTING_MODE_BIT) | (1U << TIMER_INTERRUPT_ENABLE_BIT) | - (1U << TIMER_SIZE_SELECT_BIT) | (1U << TIMER_ONESHOT_BIT); - WRITE_UINT32(temp, HRTIMER_TIMER_REG_BASE + TIMER_CONTROL); -} - -VOID HrtimerClockStart(UINT32 period) -{ - UINT32 temp; - - /* set init value as period */ - WRITE_UINT32(period, HRTIMER_TIMER_REG_BASE + TIMER_LOAD); - - READ_UINT32(temp, HRTIMER_TIMER_REG_BASE + TIMER_CONTROL); - /* timer enabled [bit 7 set as 1] */ - temp |= 1U << TIMER_ENABLE_BIT; - WRITE_UINT32(temp, HRTIMER_TIMER_REG_BASE + TIMER_CONTROL); -} - -VOID HrtimerClockStop(VOID) -{ - UINT32 temp; - - READ_UINT32(temp, HRTIMER_TIMER_REG_BASE + TIMER_CONTROL); - /* timer disabled [bit 7 set as 0] */ - temp &= ~(1U << TIMER_ENABLE_BIT); - WRITE_UINT32(temp, HRTIMER_TIMER_REG_BASE + TIMER_CONTROL); -} - -UINT32 HrtimerClockValueGet(VOID) -{ - UINT32 temp; - - /* Read the current value of the timer3 */ - READ_UINT32(temp, HRTIMER_TIMER_REG_BASE + TIMER_VALUE); - return temp; -} - -#ifdef __cplusplus -#if __cplusplus -} -#endif /* __cplusplus */ -#endif /* __cplusplus */ diff --git a/platform/hw/hisoc/timer/timer.c b/platform/hw/hisoc/timer/timer.c deleted file mode 100644 index f78882fc..00000000 --- a/platform/hw/hisoc/timer/timer.c +++ /dev/null @@ -1,409 +0,0 @@ -/* - * Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved. - * Copyright (c) 2020-2021 Huawei Device Co., Ltd. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this list of - * conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, this list - * of conditions and the following disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its contributors may be used - * to endorse or promote products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; - * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF - * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "los_timer_pri.h" -#include "los_tick_pri.h" -#include "los_sched_pri.h" -#include "los_sys_pri.h" -#include "los_hwi.h" -#include "los_swtmr.h" - -#ifdef __cplusplus -#if __cplusplus -extern "C" { -#endif /* __cplusplus */ -#endif /* __cplusplus */ - -STATIC_ASSERT(LOSCFG_KERNEL_SMP != YES, "hisoc timer does not suppot on SMP mode!"); -STATIC_ASSERT(LOSCFG_BASE_CORE_TICK_HW_TIME == YES, "hisoc timer needs to turn on hw time!"); - -#define TIMER_ENABLE_BIT 7 -#define TIMER_COUNTING_MODE_BIT 6 -#define TIMER_INTERRUPT_ENABLE_BIT 5 -#define TIMER_FREQUENCY_DIV_BIT 3 -#define TIMER_SIZE_SELECT_BIT 1 -#define TIMER_ONESHOT_BIT 0 - -#define READ_TIMER (*(volatile UINT32 *)(TIMER_TICK_REG_BASE + TIMER_VALUE)) -#define US_PER_MS 1000 -#define MS_PER_S 1000 - -STATIC UINT32 g_timeStamp __attribute__((section(".data.init"))); -STATIC UINT32 g_lastDec __attribute__((section(".data.init"))); - -STATIC volatile UINT64 g_schedClockNanosec = 0; -STATIC volatile UINT64 g_schedClockCycle = 0; -STATIC volatile UINT32 g_timeClkLast = 0; -STATIC UINT16 g_swtmrID; - -VOID HalClockTickTimerReload(UINT64 period) -{ - UINT32 cycle = (UINT32)period; - WRITE_UINT32(cycle, TIMER_TICK_REG_BASE + TIMER_LOAD); - WRITE_UINT32(cycle, TIMER_TICK_REG_BASE + TIMER_BGLOAD); - - HalClockIrqClear(); - HalIrqClear(NUM_HAL_INTERRUPT_TIMER); -} - -VOID ResetTimerMasked(VOID) -{ - g_lastDec = READ_TIMER; - g_timeStamp = 0; -} - -UINT32 GetTimerMasked(VOID) -{ - UINT32 now = READ_TIMER; - - if (g_lastDec >= now) { - /* not roll back */ - g_timeStamp += g_lastDec - now; - } else { - /* rollback */ - g_timeStamp += g_lastDec + (g_sysClock / LOSCFG_BASE_CORE_TICK_PER_SECOND) - now; - } - - g_lastDec = now; - return g_timeStamp; -} - -UINT32 TimeClockRead(VOID) -{ - UINT32 value; - - READ_UINT32(value, TIMER_TIME_REG_BASE + TIMER_VALUE); - value = TIMER_MAXLOAD - value; - - return value; -} - -UINT32 ArchTimerRollback(VOID) -{ - UINT32 flag; - - READ_UINT32(flag, TIMER_TICK_REG_BASE + TIMER_RIS); - return flag; -} - -/* this func is start timer2 for start time */ -VOID HalClockInitStart(VOID) -{ - UINT32 temp; - /* - * enable timer2 here, - * but only time0 is used for system clock. - */ - READ_UINT32(temp, SYS_CTRL_REG_BASE + REG_SC_CTRL); - temp |= TIMER2_ENABLE; - WRITE_UINT32(temp, SYS_CTRL_REG_BASE + REG_SC_CTRL); - - /* init the timestamp and lastdec value */ - ResetTimerMasked(); - - /* disable timer2 */ - WRITE_UINT32(0x0, TIMER2_REG_BASE + TIMER_CONTROL); - /* set init value as period */ - WRITE_UINT32(TIMER_MAXLOAD, TIMER2_REG_BASE + TIMER_LOAD); - - /* - * Timing mode: 32bits [bit 1 set as 1] - * ticking with 1/256 clock frequency [bit 3 set as 1, bit 2 set as 0] - * timing circulary [bit 6 set as 1] - * timer enabled [bit 7 set as 1] - */ - temp = (1U << TIMER_ENABLE_BIT) | (1U << TIMER_COUNTING_MODE_BIT) | - (1U << TIMER_FREQUENCY_DIV_BIT) | (1U << TIMER_SIZE_SELECT_BIT); - WRITE_UINT32(temp, TIMER2_REG_BASE + TIMER_CONTROL); -} - -UINT32 GetTimer2Value(VOID) -{ - UINT32 temp; - - READ_UINT32(temp, TIMER2_REG_BASE + TIMER_VALUE); - return temp; -} - -UINT32 HalClockGetTickTimerCycles(VOID) -{ - UINT32 temp; - - READ_UINT32(temp, TIMER_TICK_REG_BASE + TIMER_VALUE); - return temp; -} - -/* get the system ms clock since the system start */ -UINT32 HiGetMsClock(VOID) -{ - const UINT32 t32 = TIMER_MAXLOAD - GetTimer2Value(); - UINT64 t64 = (UINT64)t32 << 0x8; /* Timer2 is divided by 256, left shift 8 to recover sys clock */ - UINT64 temp = OS_TIME_TIMER_CLOCK / MS_PER_S; - - return (UINT32)(t64 / temp); -} - -VOID HalClockInit(VOID) -{ - UINT32 temp; - UINT32 period = g_sysClock / LOSCFG_BASE_CORE_TICK_PER_SECOND; - /* - * enable time0, timer1 here, - * but only time0 is used for system clock. - */ - READ_UINT32(temp, SYS_CTRL_REG_BASE + REG_SC_CTRL); - temp |= TIMER_TICK_ENABLE | TIMER_TIME_ENABLE; - WRITE_UINT32(temp, SYS_CTRL_REG_BASE + REG_SC_CTRL); - - /* disable first */ - WRITE_UINT32(0x0, TIMER_TICK_REG_BASE + TIMER_CONTROL); - - /* set init value as period */ - WRITE_UINT32(period, TIMER_TICK_REG_BASE + TIMER_LOAD); - - /* - * Timing mode: 32bits [bit 1 set as 1] - * ticking with 1/1 clock frequency [bit 3 set as 0, bit 2 set as 0] - * interrupt enabled [bit 5 set as 1] - * timing circulary [bit 6 set as 1] - */ - temp = (1U << 6) | (1U << 5) | (1U << 1); - WRITE_UINT32(temp, TIMER_TICK_REG_BASE + TIMER_CONTROL); - - /* init the timestamp and lastdec value */ - ResetTimerMasked(); - - /* disable timer1 */ - WRITE_UINT32(0x0, TIMER_TIME_REG_BASE + TIMER_CONTROL); - /* set init value as period */ - WRITE_UINT32(0xffffffff, TIMER_TIME_REG_BASE + TIMER_LOAD); - - /* - * Timing mode: 32bits [bit 1 set as 1] - * ticking with 1/1 clock frequency [bit 3 set as 0, bit 2 set as 0] - * timing circulary [bit 6 set as 1] - * timer enabled [bit 7 set as 1] - */ - temp = (1U << 7) | (1U << 6) | (1U << 1); - WRITE_UINT32(temp, TIMER_TIME_REG_BASE + TIMER_CONTROL); - - (void)LOS_HwiCreate(NUM_HAL_INTERRUPT_TIMER, 0xa0, 0, OsTickHandler, 0); -} - -VOID HalClockIrqClear(VOID) -{ - WRITE_UINT32(1, TIMER_TICK_REG_BASE + TIMER_INT_CLR); -} - -VOID HalClockEnable(VOID) -{ - UINT32 val; - val = GET_UINT32(TIMER_TICK_REG_BASE + TIMER_CONTROL); - - /* timer enabled [bit 7 set as 1] */ - val |= 1U << TIMER_ENABLE_BIT; - WRITE_UINT32(val, TIMER_TICK_REG_BASE + TIMER_CONTROL); -} - -/* Delay for some number of micro-seconds */ -UINT32 GetTimer(UINT32 base) -{ - return GetTimerMasked() - base; -} - -VOID HalClockDelayUs(UINT32 usecs) -{ - UINT32 tmo = 0; - UINT32 tmp; - UINT32 intSave = LOS_IntLock(); - - /* part of usecs >= 1ms */ - if (usecs >= US_PER_MS) { - tmo = usecs / US_PER_MS; /* start to normalize for usec to cycles per sec */ - tmo *= (g_sysClock / MS_PER_S); /* largest msecond 1374389 */ - usecs -= (usecs / US_PER_MS * US_PER_MS); /* get value of usecs < 1ms */ - } - - /* part of usecs < 1ms */ - if (usecs) { - tmo += (usecs * (g_sysClock / MS_PER_S)) / US_PER_MS; /* translate us into sys_clock, prevent u32 overflow */ - } - - /* reset "advancing" timestamp to 0, set lastdec value */ - ResetTimerMasked(); - - tmp = GetTimer(0); /* get current timestamp */ - - /* set advancing stamp wake up time */ - tmo += tmp; - - while (GetTimerMasked() < tmo) {} - LOS_IntRestore(intSave); -} - -VOID HalClockFreqWrite(UINT32 freq) -{ - PRINT_WARN("hisoc timer does not support setting frequency\n"); -} - -STATIC UINT32 UpdateTimeClk(UINT32 *timeClk) -{ - UINT32 timeClkNow; - - timeClkNow = TimeClockRead(); - if (timeClkNow >= g_timeClkLast) { - *timeClk = timeClkNow - g_timeClkLast; - } else { - *timeClk = timeClkNow + (TIMER_MAXLOAD - g_timeClkLast); - } - return timeClkNow; -} - -VOID UpdateSchedClock(VOID) -{ - UINT32 timeClk; - UINT32 intSave; - - intSave = LOS_IntLock(); - g_timeClkLast = UpdateTimeClk(&timeClk); - g_schedClockCycle += (UINT64)timeClk; - g_schedClockNanosec += (UINT64)CYCLE_TO_NS(timeClk); - OsAdjTime(); - LOS_IntRestore(intSave); -} - -STATIC UINT64 GetSchedClock(VOID) -{ - UINT32 timeClk; - - (VOID)UpdateTimeClk(&timeClk); - - return (g_schedClockNanosec + (UINT64)CYCLE_TO_NS(timeClk)); -} - -STATIC UINT64 SchedClock(VOID) -{ - UINT32 intSave; - UINT64 timeClk64; - - intSave = LOS_IntLock(); - timeClk64 = GetSchedClock(); - LOS_IntRestore(intSave); - - return timeClk64; -} - -UINT64 hi_sched_clock(VOID) -{ - return SchedClock(); -} - -VOID SchedClockSwtmr(VOID) -{ - UINT32 ret; - ret = LOS_SwtmrCreate(SCHED_CLOCK_INTETRVAL_TICKS, LOS_SWTMR_MODE_PERIOD, - (SWTMR_PROC_FUNC)UpdateSchedClock, &g_swtmrID, 0); - if (ret != LOS_OK) { - PRINT_ERR("LOS_SwtmrCreate error %u\n", ret); - return; - } - ret = LOS_SwtmrStart(g_swtmrID); - if (ret != LOS_OK) { - PRINT_ERR("LOS_SwtmrStart error %u\n", ret); - return; - } -} - -LITE_OS_SEC_TEXT_INIT VOID HalClockStart(VOID) -{ - UINT32 ret = OsSchedSetTickTimerType(32); /* 32 bit tick timer */ - if (ret != LOS_OK) { - return; - } - - HalIrqUnmask(NUM_HAL_INTERRUPT_TIMER); - HalClockEnable(); - - /* start adjusting swtmer */ - SchedClockSwtmr(); - - g_cycle2NsScale = ((double)OS_SYS_NS_PER_SECOND / ((long)OS_TIME_TIMER_CLOCK)); -} - -UINT64 HalClockGetCycles(VOID) -{ - UINT32 timeClk; - UINT32 intSave; - UINT64 cycle; - - intSave = LOS_IntLock(); - (VOID)UpdateTimeClk(&timeClk); - cycle = g_schedClockCycle + (UINT64)timeClk; - LOS_IntRestore(intSave); - - return cycle; -} - -VOID HalDelayUs(UINT32 usecs) -{ - UINT32 tmo = 0; - UINT32 tmp; - UINT32 intSave = LOS_IntLock(); - - /* part of usecs >= 1ms */ - if (usecs >= US_PER_MS) { - tmo = usecs / US_PER_MS; /* start to normalize for usec to cycles per sec */ - tmo *= (g_sysClock / MS_PER_S); /* largest msecond 1374389 */ - usecs -= (usecs / US_PER_MS * US_PER_MS); /* get value of usecs < 1ms */ - } - - /* part of usecs < 1ms */ - if (usecs) { - tmo += (usecs * (g_sysClock / MS_PER_S)) / US_PER_MS; /* translate us into sys_clock, prevent u32 overflow */ - } - - /* reset "advancing" timestamp to 0, set lastdec value */ - ResetTimerMasked(); - - tmp = GetTimer(0); /* get current timestamp */ - - /* set advancing stamp wake up time */ - tmo += tmp; - - while (GetTimerMasked() < tmo) {} - LOS_IntRestore(intSave); -} - -#ifdef __cplusplus -#if __cplusplus -} -#endif /* __cplusplus */ -#endif /* __cplusplus */ diff --git a/platform/uart/amba-pl011-lagacy/uart.c b/platform/uart/amba-pl011-lagacy/uart.c deleted file mode 100644 index 25adc557..00000000 --- a/platform/uart/amba-pl011-lagacy/uart.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - * Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved. - * Copyright (c) 2020-2021 Huawei Device Co., Ltd. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this list of - * conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, this list - * of conditions and the following disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its contributors may be used - * to endorse or promote products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; - * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF - * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "los_event.h" -#include "los_task.h" -#include "hisoc/uart.h" -#include "los_printf.h" -EVENT_CB_S g_uartEvent; - -#ifdef LOSCFG_PLATFORM_UART_WITHOUT_VFS -#ifdef LOSCFG_SHELL -#define UART_BUF 128 -static UINT8 g_uart_buf[UART_BUF]; -extern void shellCmdLineParse(CHAR c, pf_OUTPUT pf_put); -static channel_data_t smdk_ser_channels[2] = { - {(UINT32)UART0_REG_BASE, 1000, NUM_HAL_INTERRUPT_UART0}, - {(UINT32)UART1_REG_BASE, 1000, NUM_HAL_INTERRUPT_UART1} -}; -#endif -#endif -#ifdef LOSCFG_GDB -extern int gdb_is_enter(void); -#endif - -UINT8 uart_getc(void) -{ - UINT8 ch = 0; - UINT32 base = UART_REG_BASE; -#ifdef LOSCFG_GDB - if (gdb_is_enter()) { - // nothing to do when using gdb, you can't read from serial. - } else { -#endif - UINT32 status; - READ_UINT32(status, base + UART_FR); - /* Wait until there is data in the FIFO */ - while (status & 0x10) { - READ_UINT32(status, base + UART_FR); - (VOID)LOS_TaskDelay(1); - } - - READ_UINT8(ch, UART_REG_BASE + UART_DR); -#ifdef LOSCFG_GDB - } -#endif - - return ch; /*lint !e438*/ -} /*lint !e550*/ - -#if defined(LOSCFG_COREDUMP) || defined(LOSCFG_LLTSER) -UINT8 uart_getc_interrupt(void) -{ - UINT8 ch = 0; - UINT32 status; - UINT32 base = UART_REG_BASE; - READ_UINT32(status, base + UART_FR); - - while (status & 0x10) { /*lint !e40*/ - READ_UINT32(status, base + UART_FR); - } - /* receive one char */ - READ_UINT8(ch, UART_REG_BASE + UART_DR); - return ch; -} -#endif - -#ifdef LOSCFG_GDB -static char gdb_log_buf[1024 * 8]; -static int gdb_log_buf_write_pos = 0; -static int gdb_log_buf_read_pos = 0; -const static int gdb_log_buf_size = sizeof(gdb_log_buf); - -#endif - -char uart_putc(char c) -{ -#ifdef LOSCFG_GDB - if (gdb_is_enter()) { - // if buf full - if (((gdb_log_buf_write_pos + 1) % gdb_log_buf_size) == gdb_log_buf_read_pos) { - // buffer is full, u can do others - } else { - // when using gdb, we should save log data temporarily. - gdb_log_buf[gdb_log_buf_write_pos] = c; - gdb_log_buf_write_pos = (gdb_log_buf_write_pos + 1) % gdb_log_buf_size; - } - } else { -#endif - UINT32 status = 0; - - /* Wait for Tx FIFO not full */ - do { - READ_UINT32(status, UART_REG_BASE + UART_FR); - } while (status & 0x20); - - WRITE_UINT8(c, UART_REG_BASE + UART_DR); -#ifdef LOSCFG_GDB - } -#endif - - return c; -} - -unsigned int g_uart_fputc_en __attribute__ ((section(".data"))) = 1; -char uart_fputc(char c, void *f) -{ - if (g_uart_fputc_en == 1) { - if (c == '\n') { - uart_putc('\r'); /*lint !e534*/ - } - return (uart_putc(c)); - } else { - return 0; - } -} - -#ifdef LOSCFG_PLATFORM_UART_WITHOUT_VFS -#ifdef LOSCFG_SHELL -static void uart_notice_adapt(void) -{ - LOS_EventWrite(&g_uartEvent, 0x112); -} -void uart_get_raw(void) -{ - UINT8 ch; - static int cnt_ii = 0; - if (cnt_ii == 0) { - (VOID)memset_s(g_uart_buf, UART_BUF, 0, UART_BUF); - } - ch = uart_getc(); - g_uart_buf[cnt_ii] = ch; - cnt_ii++; - switch (cnt_ii) { - case 1: // only one char - if (ch != 27) { // un special - uart_notice_adapt(); - cnt_ii = 0; - } - break; - case 2: - if (ch != 91) { - uart_notice_adapt(); - cnt_ii = 0; - } - break; - case 3: - switch (ch) { - default: - case 'A': - case 'B': - case 'C': - case 'D': - uart_notice_adapt(); - cnt_ii = 0; - break; - case 51: - case 49: - case 52: - break; - } - break; - case 4: - uart_notice_adapt(); - cnt_ii = 0; - break; - - default: - uart_notice_adapt(); - cnt_ii = 0; - break; - } -} -extern void dprintf(const char *fmt, ...); - -static void uart_irqhandle(void) -{ - shellCmdLineParse(0, dprintf); - WRITE_UINT32((1 << 4) | (1 << 6), UART_REG_BASE + UART_CLR); -} - -int uart_hwiCreate(void) -{ - UINT32 uwRet = 0; - if (uwRet != LOS_HwiCreate(NUM_HAL_INTERRUPT_UART, 0xa0, 0, uart_irqhandle, 0)) { - return uwRet; - } - uart_interrupt_unmask(); - return 0; -} -#endif /* LOSCFG_SHELL */ -#endif /* LOSCFG_PLATFORM_UART_WITHOUT_VFS */ - -void uart_init(void) -{ - UINT32 uwBaudRate; - UINT32 divider; - UINT32 remainder; - UINT32 fraction; - -#if defined LOSCFG_PLATFORM_HI3519 || defined LOSCFG_PLATFORM_HI3519V101 || defined LOSCFG_PLATFORM_HI3559 - uart_pin_mux_cfg(CONSOLE_UART); /*lint !e506*/ - uart_clk_cfg(CONSOLE_UART, true); /*lint !e506*/ -#endif - - /* First, disable everything */ - WRITE_UINT32(0x0, UART_REG_BASE + UART_CR); - - /* set baud rate */ - uwBaudRate = 16 * CONSOLE_UART_BAUDRATE; - divider = CONFIG_UART_CLK_INPUT / uwBaudRate; - remainder = CONFIG_UART_CLK_INPUT % uwBaudRate; - uwBaudRate = (8 * remainder) / CONSOLE_UART_BAUDRATE; - fraction = (uwBaudRate >> 1) + (uwBaudRate & 1); - - WRITE_UINT32(divider, UART_REG_BASE + UART_IBRD); - WRITE_UINT32(fraction, UART_REG_BASE + UART_FBRD); - - /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. */ - WRITE_UINT32((3 << 5) | (1 << 4), UART_REG_BASE + UART_LCR_H); - - /* set the fifo threshold of recv interrupt >= 1/8 full */ - WRITE_UINT32((2 << 3) | (4 << 0), UART_REG_BASE + UART_IFLS); - - /* set nonblock of recv interrupt and recv timeout interrupt */ - WRITE_UINT32((1 << 4) | (1 << 6), UART_REG_BASE + UART_IMSC); - /* enable the UART */ - WRITE_UINT32((1 << 0) | (1 << 8) | (1 << 9), UART_REG_BASE + UART_CR); - - (VOID)LOS_EventInit(&g_uartEvent); -} - -#ifdef LOSCFG_GDB -UINT8 gdb_uart_getc(void) -{ - UINT8 ch = 0; - UINT32 status; - - UINT32 base = UART_REG_BASE; - READ_UINT32(status, base + UART_FR); - - /* Wait until there is data in the FIFO */ - while (status & 0x10) { /*lint !e40*/ - READ_UINT32(status, base + UART_FR); - } - - READ_UINT8(ch, UART_REG_BASE + UART_DR); - return ch; /*lint !e438*/ -} - -char gdb_uart_putc(char c) -{ - UINT32 status = 0; - - /* Wait for Tx FIFO not full */ - do { - READ_UINT32(status, UART_REG_BASE + UART_FR); - } while (status & 0x20); - - WRITE_UINT8(c, UART_REG_BASE + UART_DR); - return c; -} - -void gdb_log_flush(void) -{ - while (gdb_log_buf_read_pos != gdb_log_buf_write_pos) { - gdb_uart_putc(gdb_log_buf[gdb_log_buf_read_pos]); - gdb_log_buf_read_pos = (gdb_log_buf_read_pos + 1) % gdb_log_buf_size; - } -} - -#endif - -void uart_interrupt_unmask(void) -{ - HalIrqUnmask(NUM_HAL_INTERRUPT_UART); -} diff --git a/platform/uart/amba_pl011/amba_pl011.c b/platform/uart/amba_pl011/amba_pl011.c deleted file mode 100755 index 7978ec14..00000000 --- a/platform/uart/amba_pl011/amba_pl011.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved. - * Copyright (c) 2020-2021 Huawei Device Co., Ltd. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this list of - * conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, this list - * of conditions and the following disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its contributors may be used - * to endorse or promote products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; - * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF - * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "amba_pl011.h" -#include "los_event.h" -#include "los_task_pri.h" - -EVENT_CB_S g_stShellEvent; - -CHAR g_inputCmd[CMD_LENGTH]; -INT32 g_inputIdx = 0; -#ifdef LOSCFG_QUICK_START -__attribute__ ((section(".data"))) UINT32 g_uart_fputc_en = 0; -#else -__attribute__ ((section(".data"))) UINT32 g_uart_fputc_en = 1; -#endif - -#define REG32(addr) ((volatile UINT32 *)(UINTPTR)(addr)) -#define UARTREG(base, reg) (*REG32((base) + (reg))) -#define UART_FR_TXFF (0x1U << 5) - -STATIC VOID UartPutcReg(UINTPTR base, CHAR c) -{ - /* Spin while fifo is full */ - while (UARTREG(base, UART_FR) & UART_FR_TXFF) {} - UARTREG(base, UART_DR) = c; -} - -STATIC INLINE UINTPTR uart_to_ptr(UINTPTR n) -{ - (VOID)n; - return UART_REG_BASE; -} - -INT32 uart_putc(INT32 port, CHAR c) -{ - UINTPTR base = uart_to_ptr((UINT32)port); - UartPutcReg(base, c); - return 1; -} - -CHAR uart_fputc(CHAR c, VOID *f) -{ - (VOID)f; - if (g_uart_fputc_en == 1) { - if (c == '\n') { - (VOID)uart_putc(0, '\r'); - } - return (uart_putc(0, (c))); - } else { - return 0; - } -} - -LITE_OS_SEC_BSS STATIC SPIN_LOCK_INIT(g_uartOutputSpin); - -STATIC VOID UartPutStr(UINTPTR base, const CHAR *s, UINT32 len) -{ - UINT32 i; - - for (i = 0; i < len; i++) { - if (*(s + i) == '\n') { - UartPutcReg(base, '\r'); - } - UartPutcReg(base, *(s + i)); - } -} - -UINT32 UartPutsReg(UINTPTR base, const CHAR *s, UINT32 len, BOOL isLock) -{ - UINT32 intSave; - - if (g_uart_fputc_en == 0) { - return 0; - } - - if (isLock) { - LOS_SpinLockSave(&g_uartOutputSpin, &intSave); - UartPutStr(base, s, len); - LOS_SpinUnlockRestore(&g_uartOutputSpin, intSave); - } else { - UartPutStr(base, s, len); - } - - return len; -} - -VOID UartPuts(const CHAR *s, UINT32 len, BOOL isLock) -{ - UINTPTR base = uart_to_ptr(0); - (VOID)UartPutsReg(base, s, len, isLock); -} - -INT32 uart_puts(const CHAR *s, UINTPTR len, VOID *state) -{ - (VOID)state; - UINTPTR i; - - for (i = 0; i < len; i++) { - if (*(s + i) != '\0') { - if (*(s + i) == '\n') { - (VOID)uart_fputc('\r', NULL); - } - - (VOID)uart_fputc(*(s + i), NULL); - } - } - - return (INT32)len; -} - -VOID uart_handler(VOID) -{ - CHAR c; - UINTPTR base = uart_to_ptr(0); - - c = UARTREG(base, UART_DR); - - switch (c) { - case '\r': - case '\n': - if (g_inputIdx < CMD_LENGTH - 1) { - g_inputCmd[g_inputIdx++] = '\0'; - LOS_EventWrite(&g_stShellEvent, 0x1); - (VOID)uart_putc(0, '\r'); - (VOID)uart_putc(0, '\n'); - } - break; - case 0x8: /* backspace */ - case 0x7f: /* delete */ - if (g_inputIdx > 0) { - g_inputIdx--; - (VOID)uart_putc(0, '\b'); - (VOID)uart_putc(0, ' '); - (VOID)uart_putc(0, '\b'); - } - break; - default: - if (g_inputIdx < CMD_LENGTH - 1) { - (VOID)uart_putc(0, c); - g_inputCmd[g_inputIdx++] = c; - } - } -} - -VOID uart_early_init(VOID) -{ - /* enable uart transmit */ - UARTREG(UART_REG_BASE, UART_CR) = (1 << 8) | (1 << 0); -} - -VOID uart_init(VOID) -{ - UINT32 ret; - - /* uart interrupt priority should be the highest in interrupt preemption mode */ - ret = LOS_HwiCreate(NUM_HAL_INTERRUPT_UART, 0, 0, (HWI_PROC_FUNC)uart_handler, NULL); - if (ret != LOS_OK) { - PRINT_ERR("%s,%d, uart interrupt created error:%x\n", __FUNCTION__, __LINE__, ret); - } else { - /* clear all irqs */ - UARTREG(UART_REG_BASE, UART_ICR) = 0x3ff; - - /* set fifo trigger level */ - UARTREG(UART_REG_BASE, UART_IFLS) = 0; - - /* enable rx interrupt */ - UARTREG(UART_REG_BASE, UART_IMSC) = (1 << 4 | 1 << 6); - - /* enable receive */ - UARTREG(UART_REG_BASE, UART_CR) |= (1 << 9); - - HalIrqUnmask(NUM_HAL_INTERRUPT_UART); - } -} diff --git a/platform/uart/amba_pl011/amba_pl011.h b/platform/uart/amba_pl011/amba_pl011.h deleted file mode 100644 index 6de19dec..00000000 --- a/platform/uart/amba_pl011/amba_pl011.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved. - * Copyright (c) 2020-2021 Huawei Device Co., Ltd. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this list of - * conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, this list - * of conditions and the following disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its contributors may be used - * to endorse or promote products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; - * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF - * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _AMBA_PL011_UART_H -#define _AMBA_PL011_UART_H - -#include "los_typedef.h" - -#ifdef __cplusplus -#if __cplusplus -extern "C" { -#endif /* __cplusplus */ -#endif /* __cplusplus */ - -#define UART_DR 0x0 /* data register */ -#define UART_RSR 0x04 -#define UART_FR 0x18 /* flag register */ -#define UART_CLR 0x44 /* interrupt clear register */ -#define UART_CR 0x30 /* control register */ -#define UART_IBRD 0x24 /* interge baudrate register */ -#define UART_FBRD 0x28 /* decimal baudrate register */ -#define UART_LCR_H 0x2C -#define UART_IFLS 0x34 /* fifo register */ -#define UART_IMSC 0x38 /* interrupt mask register */ -#define UART_RIS 0x3C /* base interrupt state register */ -#define UART_MIS 0x40 /* mask interrupt state register */ -#define UART_ICR 0x44 -#define UART_DMACR 0x48 /* DMA control register */ - -#define CMD_LENGTH 128 - -extern CHAR g_inputCmd[CMD_LENGTH]; -extern INT32 g_inputIdx; - -#ifdef __cplusplus -#if __cplusplus -} -#endif /* __cplusplus */ -#endif /* __cplusplus */ -#endif diff --git a/platform/uart/dw-3.0.8a/uart.c b/platform/uart/dw-3.0.8a/uart.c deleted file mode 100644 index bd03df9e..00000000 --- a/platform/uart/dw-3.0.8a/uart.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved. - * Copyright (c) 2020-2021 Huawei Device Co., Ltd. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this list of - * conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, this list - * of conditions and the following disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its contributors may be used - * to endorse or promote products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; - * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF - * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "los_event.h" -#include "hisoc/uart.h" - - -EVENT_CB_S g_uartEvent; -#ifdef LOSCFG_PLATFORM_UART_WITHOUT_VFS -#ifdef LOSCFG_SHELL -#define UART_BUF 128 -static UINT8 g_uart_buf[UART_BUF]; -extern void shellCmdLineParse(CHAR c, pf_OUTPUT pf_put); -#endif -#endif -UINT8 uart_getc(void) -{ - UINT8 ch = 0; - - while (!(GET_UINT32(UART_REG_BASE + UART_USR) & 0x08)) { /*lint !e40*/ - LOS_Msleep(100); - } - /* receive one char */ - READ_UINT8(ch, UART_REG_BASE + UART_DR); - return ch; -} - -#if defined(LOSCFG_COREDUMP) || defined(LOSCFG_LLTSER) -UINT8 uart_getc_interrupt(void) -{ - UINT8 ch = 0; - - while (!(GET_UINT32(UART_REG_BASE + UART_USR) & 0x08)) { /*lint !e40*/ - } - /* receive one char */ - READ_UINT8(ch, UART_REG_BASE + UART_DR); - return ch; -} -#endif -/* send */ -char uart_putc (char c) -{ - /* Wait until THRE is empyt */ - while (!(GET_UINT32(UART_REG_BASE + UART_USR) & 0x02)); /*lint !e40*/ - /* send one char */ - WRITE_UINT8(c, UART_REG_BASE + UART_DR); - return c; -} - -unsigned int g_uart_fputc_en __attribute__ ((section(".data"))) = 1; -char uart_fputc(char c, void *f) -{ - if (g_uart_fputc_en == 1) { - if (c == '\n') { - uart_putc('\r'); /*lint !e534*/ - } - return (uart_putc(c)); - } else { - return 0; - } -} - -#ifdef LOSCFG_PLATFORM_UART_WITHOUT_VFS -#ifdef LOSCFG_SHELL -static void uart_notice_adapt(void) -{ - LOS_EventWrite(&g_uartEvent, 0x112); -} - -void uart_get_raw(void) -{ - UINT8 ch; - static int cnt_ii = 0; - if (cnt_ii == 0) { - (VOID)memset_s(g_uart_buf, UART_BUF, 0, UART_BUF); - } - ch = uart_getc(); - g_uart_buf[cnt_ii] = ch; - cnt_ii++; - switch (cnt_ii) { - case 1: // only one char - if (ch != 27) { // un special - uart_notice_adapt(); - cnt_ii = 0; - } - break; - case 2: - if (ch != 91) { - uart_notice_adapt(); - cnt_ii = 0; - } - break; - case 3: - switch (ch) { - default: - case 'A': - case 'B': - case 'C': - case 'D': - { - uart_notice_adapt(); - cnt_ii = 0; - } - break; - case 51: - case 49: - case 52: - break; - } - break; - case 4: - { - uart_notice_adapt(); - cnt_ii = 0; - } - break; - default: - { - uart_notice_adapt(); - cnt_ii = 0; - } - break; - } -} -extern void dprintf(const char *fmt, ...); - -static void uart_irqhandle(void) -{ - UINT8 ch; - shellCmdLineParse(0, dprintf); -} - -int uart_hwiCreate(void) -{ - UINT32 uwRet = 0; - if (uwRet != LOS_HwiCreate(NUM_HAL_INTERRUPT_UART, 0xa0, 0, uart_irqhandle, 0)) { - return uwRet; - } - uart_interrupt_unmask(); - return 0; -} - -#endif -#endif -void uart_init() -{ - unsigned int temp; - unsigned int divider; - unsigned char dividerH, dividerL; - - /* disable UART1 FIFO */ - WRITE_UINT32(0, UART_REG_BASE + UART_FCR); /*lint !e40*/ - - /* reset and enable UART1 FIFO */ - WRITE_UINT32(0x7, UART_REG_BASE + UART_FCR); /*lint !e40*/ - - /* disable UART1 interrupt */ - WRITE_UINT32(0, UART_REG_BASE + UART_IER); /*lint !e40*/ - - /* enable DLL and DLH */ - WRITE_UINT32(0x80, UART_REG_BASE + UART_LCR); /*lint !e40*/ - /* Caculate devide */ - temp = 16 * CONSOLE_UART_BAUDRATE; - divider = CONFIG_UART_CLK_INPUT / temp; - dividerH = ((divider) & 0xff00) >> 8; - dividerL = ((divider) & 0x00ff); - - /* configure DLL and DLH */ - WRITE_UINT32(dividerL, UART_REG_BASE + UART_DLL); /*lint !e40*/ - WRITE_UINT32(dividerH, UART_REG_BASE + UART_DLH); /*lint !e40*/ - - /* disable DLL and DLH */ - WRITE_UINT32(0x0, UART_REG_BASE + UART_LCR); /*lint !e40*/ - - /* 8bit data, 1bit stop,even parity */ - WRITE_UINT32(0x1b, UART_REG_BASE + UART_LCR); /*lint !e40*/ - - /* enable UART1 */ - WRITE_UINT32(0x1, UART_REG_BASE + UART_IER); /*lint !e40*/ - - (VOID)LOS_EventInit(&g_uartEvent); -} - -void uart_interrupt_unmask(void) -{ - HalIrqUnmask(NUM_HAL_INTERRUPT_UART); -}