/* * Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved. * Copyright (c) 2020-2021 Huawei Device Co., Ltd. All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this list of * conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright notice, this list * of conditions and the following disclaimer in the documentation and/or other materials * provided with the distribution. * * 3. Neither the name of the copyright holder nor the names of its contributors may be used * to endorse or promote products derived from this software without specific prior written * permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef TFTPC_H #define TFTPC_H #include "types_adapt.h" #if LWIP_TFTP /* don't build if not configured for use in lwipopts.h */ #if defined (__cplusplus) && __cplusplus extern "C" { #endif #define TFTP_NULL_UINT32 ((u32_t)0xffffffffUL) #define TFTP_NULL_INT32 -1 /** @cond liteos * @defgroup TFTP_Interfaces * @ingroup Enums * * This section contains the TFTP enums. */ /** * * This Enum is used to specify the transfer mode of the file to be handled by TFTP client. */ typedef enum tagTFTPC_TransferMode { TRANSFER_MODE_ASCII = 0, /**< Indicates that the mode of transfer is ASCII. */ TRANSFER_MODE_BINARY, /**< Indicates that the mode of transfer is Binary */ TRANSFER_MODE_BUTT /**< Indicates invalid transfer mode.*/ } TFTPC_TRANSFER_MODE_E; /** * This Enum is used to specify the transfer mode to be handled by TFTP client * This Enum indicates the TFTP client transfer mode of the file */ typedef enum tagTFTPC_ErrCode { TFTPC_SOCKET_FAILURE = 1, /**< Error while creating UDP socket. */ TFTPC_BIND_FAILURE = 2, /**< Error while binding to the UDP socket. */ TFTPC_SELECT_ERROR = 3, /**< Error returned by select() system call. */ TFTPC_RECVFROM_ERROR = 4, /**< Error while receiving data from the peer. */ TFTPC_SENDTO_ERROR = 5, /**< Error while sending data to the peer. */ TFTPC_FILE_NOT_FOUND = 6, /**< Requested file is not found. */ /**< This is the error sent by the server when host name cannot be resolved. */ TFTPC_CANNOT_RESOLVE_HOSTNAME = 7, TFTPC_INVALID_PARAVALUE = 8, /**< Input parameters passed to TFTP interfaces are invalid. */ /**< Error detected in TFTP packet or the error received from the TFTP server. */ TFTPC_PROTO_ERROR = 9, /**< Error during packet synchronization while sending or unexpected packet is received. */ TFTPC_SYNC_FAILURE = 10, /**< File size limit crossed, Max block can be 0xFFFF, each block containing 512 bytes. */ TFTPC_FILE_TOO_BIG = 11, TFTPC_SRC_FILENAME_LENGTH_ERROR = 12, /**< File name length greater than 256. */ TFTPC_IP_NOT_WITHIN_RANGE = 13, /**< Host name IP is not valid. */ TFTPC_ACCESS_ERROR = 14, /**< TFTP server returned file access error. */ /**< TFTP server returned error signifying that the DISK is full to write. */ TFTPC_DISK_FULL = 15, TFTPC_FILE_EXISTS = 16, /**< TFTP server returned error signifying that the file exists. */ /**< tftp_put_file_by_filename returned error signifying that the source file name do not exist. */ TFTPC_FILE_NOT_EXIST = 17, TFTPC_MEMALLOC_ERROR = 18, /**< Memory allocation failed in TFTP client. */ TFTPC_FILEOPEN_ERROR = 19, /**< File open failed. */ TFTPC_FILEREAD_ERROR = 20, /**< File read error. */ TFTPC_FILECREATE_ERROR = 21, /**< File create error. */ TFTPC_FILEWRITE_ERROR = 22, /**< File write error. */ TFTPC_TIMEOUT_ERROR = 23, /**< Max time expired while waiting for file to be received. */ /**< Error when the received packet is less than 4 bytes (error length) or greater than 512 bytes. */ TFTPC_PKT_SIZE_ERROR = 24, TFTPC_ERROR_NOT_DEFINED = 25, /**< Returned by TFTP server for protocol user error. */ TFTPC_DEST_PATH_LENGTH_ERROR = 26, /**< If the destination file path length is greater than 256. */ TFTPC_UNKNOWN_TRANSFER_ID = 27, /**< Returned by TFTP server for undefined transfer ID. */ /**< IOCTL function failed at TFTP client while setting the socket to non-block. */ TFTPC_IOCTLSOCKET_FAILURE = 28, TFTPC_MEMCPY_FAILURE = 29 /**< TFTP memcpy failure. */ } TFTPC_ERR_CODE_E; typedef enum tagTFTPC_OpCode { TFTPC_OP_RRQ = 1, /* read request */ TFTPC_OP_WRQ, /* write request */ TFTPC_OP_DATA, /* data packet */ TFTPC_OP_ACK, /* acknowledgement */ TFTPC_OP_ERROR, /* error code */ TFTPC_OP_OPT /* option code */ } TFTPC_OPCODE_E; typedef enum tagTFTPC_PROTOCOL_ErrCode { TFTPC_PROTOCOL_USER_DEFINED = 0, TFTPC_PROTOCOL_FILE_NOT_FOUND, TFTPC_PROTOCOL_ACCESS_ERROR, TFTPC_PROTOCOL_DISK_FULL, TFTPC_PROTOCOL_PROTO_ERROR, TFTPC_PROTOCOL_UNKNOWN_TRANSFER_ID, TFTPC_PROTOCOL_FILE_EXISTS, TFTPC_PROTOCOL_CANNOT_RESOLVE_HOSTNAME } TFTPC_PROT_ERRCODE_E; #ifndef TFTPC_MAX_SEND_REQ_ATTEMPTS #define TFTPC_MAX_SEND_REQ_ATTEMPTS 5 /* tftp max attempts */ #endif #ifndef TFTPC_TIMEOUT_PERIOD #define TFTPC_TIMEOUT_PERIOD 5 /* tftp timeout period,unit :s */ #endif #define TFTPC_SERVER_PORT 69 /* tftp server well known port no. */ /* MAX file size in TFTP is 32 MB. Reason for keeping 75 here , is ((75*512=38400bytes)/1024) = 37MB. So the recv/Send Loop can receive the complete MAX message from the network */ #define TFTPC_MAX_WAIT_IN_LOOP 75 #define TFTP_BLKSIZE 512 /* data block size (IEN-133) */ #define TFTP_HDRSIZE 4 /* TFTP header size */ #define TFTP_PKTSIZE (TFTP_BLKSIZE + TFTP_HDRSIZE) /* Packet size */ #define TFTP_MAX_MODE_SIZE 9 /* max size of mode string */ #define TFTP_MAXERRSTRSIZE 100 /* max size of error message string */ #define TFTP_MAX_PATH_LENGTH 256 /* Max path or filename length */ #define TFTP_MAX_BLK_NUM (0xFFFFL) /* MAximum block number */ /* IP address not including reserved IPs(0 and 127) and multicast addresses(Class D) */ #define TFTPC_IP_ADDR_MIN 0x01000000 #define TFTPC_IP_ADDR_EX_RESV 0x7effffff #define TFTPC_IP_ADDR_CLASS_B 0x80000000 #define TFTPC_IP_ADDR_EX_CLASS_DE 0xdfffffff #define TFTPC_FOUR 4 /* minimum packet size */ /****************************************************************************/ /* Structure definitions */ /****************************************************************************/ /* Tftp data packet */ typedef struct tagTFTPC_DATA { u16_t usBlknum; /* block number */ u8_t ucDataBuf[TFTP_BLKSIZE]; /* Actual data */ } TFTPC_DATA_S; /* TFTP error packet */ typedef struct tagTFTPC_ERROR { u16_t usErrNum; /* error number */ u8_t ucErrMesg[TFTP_MAXERRSTRSIZE]; /* error message */ } TFTPC_ERROR_S; /* TFTP packet format */ typedef struct tagTFTPC_PACKET { u16_t usOpcode; /* Opcode value */ union { /* it contains mode and filename */ s8_t ucName_Mode[TFTP_MAX_PATH_LENGTH + TFTP_MAX_MODE_SIZE]; u16_t usBlknum; /* Block Number */ TFTPC_DATA_S stTFTP_Data; /* Data Packet */ TFTPC_ERROR_S stTFTP_Err; /* Error Packet */ } u; } TFTPC_PACKET_S; /** @defgroup TFTP_Interfaces * This section contains the TFTP Interfaces */ /* Func Name: lwip_tftp_get_file_by_filename */ /** * @ingroup TFTP_Interfaces * @brief * This API gets the source file from the server. It then stores the received file in the destination path * on the client system. * * @param[in] ulHostAddr IP address of Host. This is the TFTP server IP. [NA] * @param[in] usTftpServPort TFTP server port. If the value is passed as 0 then the default TFTP * PORT 69 is used. [NA] * @param[in] ucTftpTransMode File transfer mode, either TRANSFER_MODE_BINARY or TRANSFER_MODE_ASCII. [NA] * @param[in] szSrcFileName Source file in the tftp server. [NA] * @param[in] szDestDirPath Destination file path in the in the client. [NA] * @param[out] [N/A] * * @return * ERR_OK: On success \n * TFTPC_ERR_CODE_E: On failure * * @note * \n * The behavior of this API is such that if the destination file already exists, it will be overwritten. */ u32_t lwip_tftp_get_file_by_filename(u32_t ulHostAddr, u16_t usTftpServPort, u8_t ucTftpTransMode, s8_t *szSrcFileName, s8_t *szDestDirPath); /* @defgroup TFTP_Interfaces * This section contains the TFTP Interfaces */ /* Func Name: lwip_tftp_put_file_by_filename */ /** * @ingroup TFTP_Interfaces * @brief * This API reads the contents of the source file on the client system and sends it to the server and * server then receives the data and stores it in the specified destination path. * * @param[in] ulHostAddr Indicates the IP address of Host. This is the TFTP server IP. * @param[in] usTftpServPort Indicates the TFTP server port. If the value is passed as 0 then the default TFTP * PORT 69 is used. * @param[in] ucTftpTransMode Indicates the file transfer mode, either TRANSFER_MODE_BINARY or TRANSFER_MODE_ASCII. * @param[in] szSrcFileName Indicates the source file in the client. * @param[in] szDestDirPath Indicates the destination file path on the tftp server. * * @return * ERR_OK: On success \n * TFTPC_ERR_CODE_E: On failure * */ u32_t lwip_tftp_put_file_by_filename(u32_t ulHostAddr, u16_t usTftpServPort, u8_t cTftpTransMode, s8_t *szSrcFileName, s8_t *szDestDirPath); #ifdef TFTP_TO_RAWMEM /* @defgroup TFTP_Interfaces * This section contains the TFTP Interfaces */ /* Func Name: lwip_tftp_get_file_by_filename_to_rawmem */ /** * @ingroup TFTP_Interfaces * @brief * This API gets the source file from the server. It then stores the received file in the target memory * on the client system. * * @param[in] ulHostAddr Indicates the IP address of the Host. This is the TFTP server IP. * @param[in] usTftpServPort Indicates the TFTP server port. If the value is passed as 0 then the default TFTP * PORT 69 is used. * @param[in] ucTftpTransMode Indicates the File transfer mode, either TRANSFER_MODE_BINARY or TRANSFER_MODE_ASCII. * @param[in] szSrcFileName Indicates the Source file in the TFTP server. * @param[in] szDestMemAddr Indicates the target memory address in the client. * @param[in/out] ulFileLength Indicates the target memory address can cache the size of the content, and The real size of the Source file. * * @return * ERR_OK: On success \n * TFTPC_ERR_CODE_E: On failure * @note * 1.You must define TFTP_TO_RAWMEM when using this API. \n * 2.The behavior of this API is such that if the destination file already exists, it will be overwritten. * @endcond */ u32_t lwip_tftp_get_file_by_filename_to_rawmem(u32_t ulHostAddr, u16_t usTftpServPort, u8_t ucTftpTransMode, s8_t *szSrcFileName, s8_t *szDestMemAddr, u32_t *ulFileLength); #endif #if defined (__cplusplus) && __cplusplus } #endif #endif /* LWIP_TFTP */ #endif /* TFTPC_H */