kernel_liteos_a/kernel/include/los_task.h

1075 lines
37 KiB
C
Executable File

/*
* Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved.
* Copyright (c) 2020-2021 Huawei Device Co., Ltd. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this list of
* conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice, this list
* of conditions and the following disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* @defgroup los_task Task
* @ingroup kernel
*/
#ifndef _LOS_TASK_H
#define _LOS_TASK_H
#include "los_base.h"
#include "los_list.h"
#include "los_sys.h"
#include "los_tick.h"
#include "los_event.h"
#include "los_memory.h"
#include "los_err.h"
#ifdef __cplusplus
#if __cplusplus
extern "C" {
#endif /* __cplusplus */
#endif /* __cplusplus */
#define CPUID_TO_AFFI_MASK(cpuid) (0x1u << (cpuid))
/**
* @ingroup los_task
* Flag that indicates the task or task control block status.
*
* The task is automatically deleted.
*/
#define LOS_TASK_STATUS_DETACHED 0x0800U
/**
* @ingroup los_task
* Task error code: Insufficient memory for task creation.
*
* Value: 0x03000200
*
* Solution: Allocate bigger memory partition to task creation.
*/
#define LOS_ERRNO_TSK_NO_MEMORY LOS_ERRNO_OS_FATAL(LOS_MOD_TSK, 0x00)
/**
* @ingroup los_task
* Task error code: Null parameter.
*
* Value: 0x02000201
*
* Solution: Check the parameter.
*/
#define LOS_ERRNO_TSK_PTR_NULL LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x01)
/**
* @ingroup los_task
* Task error code: The task stack is not aligned.
*
* Value: 0x02000202
*
* Solution: Align the task stack.
*/
#define LOS_ERRNO_TSK_STKSZ_NOT_ALIGN LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x02)
/**
* @ingroup los_task
* Task error code: Incorrect task priority.
*
* Value: 0x02000203
*
* Solution: Re-configure the task priority by referring to the priority range.
*/
#define LOS_ERRNO_TSK_PRIOR_ERROR LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x03)
/**
* @ingroup los_task
* Task error code: The task entrance is NULL.
*
* Value: 0x02000204
*
* Solution: Define the task entrance function.
*/
#define LOS_ERRNO_TSK_ENTRY_NULL LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x04)
/**
* @ingroup los_task
* Task error code: The task name is NULL.
*
* Value: 0x02000205
*
* Solution: Set the task name.
*/
#define LOS_ERRNO_TSK_NAME_EMPTY LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x05)
/**
* @ingroup los_task
* Task error code: The task stack size is too small.
*
* Value: 0x02000206
*
* Solution: Expand the task stack.
*/
#define LOS_ERRNO_TSK_STKSZ_TOO_SMALL LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x06)
/**
* @ingroup los_task
* Task error code: Invalid task ID.
*
* Value: 0x02000207
*
* Solution: Check the task ID.
*/
#define LOS_ERRNO_TSK_ID_INVALID LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x07)
/**
* @ingroup los_task
* Task error code: The task is already suspended.
*
* Value: 0x02000208
*
* Solution: Suspend the task after it is resumed.
*/
#define LOS_ERRNO_TSK_ALREADY_SUSPENDED LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x08)
/**
* @ingroup los_task
* Task error code: The task is not suspended.
*
* Value: 0x02000209
*
* Solution: Suspend the task.
*/
#define LOS_ERRNO_TSK_NOT_SUSPENDED LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x09)
/**
* @ingroup los_task
* Task error code: The task is not created.
*
* Value: 0x0200020a
*
* Solution: Create the task.
*/
#define LOS_ERRNO_TSK_NOT_CREATED LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x0a)
/**
* @ingroup los_task
* Task error code: The task is locked when it is being deleted.
*
* Value: 0x0300020b
*
* Solution: Unlock the task.
*/
#define LOS_ERRNO_TSK_DELETE_LOCKED LOS_ERRNO_OS_FATAL(LOS_MOD_TSK, 0x0b)
/**
* @ingroup los_task
* Task error code: The task message is nonzero.
*
* Value: 0x0200020c
*
* Solution: This error code is not in use temporarily.
*/
#define LOS_ERRNO_TSK_MSG_NONZERO LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x0c)
/**
* @ingroup los_task
* Task error code: The task delay occurs during an interrupt.
*
* Value: 0x0300020d
*
* Solution: Perform this operation after exiting from the interrupt.
*/
#define LOS_ERRNO_TSK_DELAY_IN_INT LOS_ERRNO_OS_FATAL(LOS_MOD_TSK, 0x0d)
/**
* @ingroup los_task
* Task error code: The task delay occurs when the task is locked.
*
* Value: 0x0200020e
*
* Solution: Perform this operation after unlocking the task.
*/
#define LOS_ERRNO_TSK_DELAY_IN_LOCK LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x0e)
/**
* @ingroup los_task
* Task error code: The task yeild occurs when the task is locked.
* Value: 0x0200020f
*
* Solution: Check the task.
*/
#define LOS_ERRNO_TSK_YIELD_IN_LOCK LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x0f)
/**
* @ingroup los_task
* Task error code: Only one task or no task is available for scheduling.
*
* Value: 0x02000210
*
* Solution: Increase the number of tasks.
*/
#define LOS_ERRNO_TSK_YIELD_NOT_ENOUGH_TASK LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x10)
/**
* @ingroup los_task
* Task error code: No free task control block is available.
*
* Value: 0x02000211
*
* Solution: Increase the number of task control blocks.
*/
#define LOS_ERRNO_TSK_TCB_UNAVAILABLE LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x11)
/**
* @ingroup los_task
* Task error code: The task hook function is not matchable.
*
* Value: 0x02000212
*
* Solution: This error code is not in use temporarily.
*/
#define LOS_ERRNO_TSK_HOOK_NOT_MATCH LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x12)
/**
* @ingroup los_task
* Task error code: The number of task hook functions exceeds the permitted upper limit.
*
* Value: 0x02000213
*
* Solution: This error code is not in use temporarily.
*/
#define LOS_ERRNO_TSK_HOOK_IS_FULL LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x13)
/**
* @ingroup los_task
* Task error code: The operation is performed on the system-level task.
* old usage: The operation is performed on the idle task (LOS_ERRNO_TSK_OPERATE_IDLE)
*
* Value: 0x02000214
*
* Solution: Check the task ID and do not operate on the system-level task.
*/
#define LOS_ERRNO_TSK_OPERATE_SYSTEM_TASK LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x14)
/**
* @ingroup los_task
* Task error code: The task that is being suspended is locked.
*
* Value: 0x03000215
*
* Solution: Suspend the task after unlocking the task.
*/
#define LOS_ERRNO_TSK_SUSPEND_LOCKED LOS_ERRNO_OS_FATAL(LOS_MOD_TSK, 0x15)
/**
* @ingroup los_task
* Task error code: The task stack fails to be freed.
*
* Value: 0x02000217
*
* Solution: This error code is not in use temporarily.
*/
#define LOS_ERRNO_TSK_FREE_STACK_FAILED LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x17)
/**
* @ingroup los_task
* Task error code: The task stack area is too small.
*
* Value: 0x02000218
*
* Solution: This error code is not in use temporarily.
*/
#define LOS_ERRNO_TSK_STKAREA_TOO_SMALL LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x18)
/**
* @ingroup los_task
* Task error code: The task fails to be activated.
*
* Value: 0x03000219
*
* Solution: Perform task switching after creating an idle task.
*/
#define LOS_ERRNO_TSK_ACTIVE_FAILED LOS_ERRNO_OS_FATAL(LOS_MOD_TSK, 0x19)
/**
* @ingroup los_task
* Task error code: Too many task configuration items.
*
* Value: 0x0200021a
*
* Solution: This error code is not in use temporarily.
*/
#define LOS_ERRNO_TSK_CONFIG_TOO_MANY LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x1a)
/**
* @ingroup los_task
* Task error code:
*
* Value: 0x0200021b
*
* Solution: This error code is not in use temporarily.
*/
#define LOS_ERRNO_TSK_CP_SAVE_AREA_NOT_ALIGN LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x1b)
/**
* @ingroup los_task
* Task error code:
*
* Value: 0x0200021d
*
* Solution: This error code is not in use temporarily.
*/
#define LOS_ERRNO_TSK_MSG_Q_TOO_MANY LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x1d)
/**
* @ingroup los_task
* Task error code:
*
* Value: 0x0200021e
*
* Solution: This error code is not in use temporarily.
*/
#define LOS_ERRNO_TSK_CP_SAVE_AREA_NULL LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x1e)
/**
* @ingroup los_task
* Task error code:
*
* Value: 0x0200021f
*
* Solution: This error code is not in use temporarily.
*/
#define LOS_ERRNO_TSK_SELF_DELETE_ERR LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x1f)
/**
* @ingroup los_task
* Task error code: The task stack size is too large.
*
* Value: 0x02000220
*
* Solution: shrink the task stack size parameter.
*/
#define LOS_ERRNO_TSK_STKSZ_TOO_LARGE LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x20)
/**
* @ingroup los_task
* Task error code: Suspending software timer task is not allowed.
*
* Value: 0x02000221
*
* Solution: Check the task ID and do not suspend software timer task.
*/
#define LOS_ERRNO_TSK_SUSPEND_SWTMR_NOT_ALLOWED LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x21)
/**
* @ingroup los_task
* Task error code: The task delay occurs in software timer task.
*
* Value: 0x03000222
*
* Solution: Don't call Los_TaskDelay in software timer callback.
*/
#define LOS_ERRNO_TSK_DELAY_IN_SWTMR_TSK LOS_ERRNO_OS_FATAL(LOS_MOD_TSK, 0x22)
/**
* @ingroup los_task
* Task error code: The cpu affinity mask is incorrect.
*
* Value: 0x03000223
*
* Solution: Please set the correct cpu affinity mask.
*/
#define LOS_ERRNO_TSK_CPU_AFFINITY_MASK_ERR LOS_ERRNO_OS_FATAL(LOS_MOD_TSK, 0x23)
/**
* @ingroup los_task
* Task error code: Task yeild in int is not permited, which will result in unexpected result.
*
* Value: 0x02000224
*
* Solution: Don't call LOS_TaskYield in Interrupt.
*/
#define LOS_ERRNO_TSK_YIELD_IN_INT LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x24)
/**
* @ingroup los_task
* Task error code: Task sync resource (semaphore) allocated failed.
*
* Value: 0x02000225
*
* Solution: Expand LOSCFG_BASE_IPC_SEM_LIMIT.
*/
#define LOS_ERRNO_TSK_MP_SYNC_RESOURCE LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x25)
/**
* @ingroup los_task
* Task error code: Task sync failed on operating running task across cores.
*
* Value: 0x02000226
*
* Solution: Check task delete can be handled in user's scenario.
*/
#define LOS_ERRNO_TSK_MP_SYNC_FAILED LOS_ERRNO_OS_ERROR(LOS_MOD_TSK, 0x26)
/**
* @ingroup los_task
* Task error code: Task wait and timeout.
*
* Value: 0x02000227
*
* Solution: Returns the timeout.
*/
#define LOS_ERRNO_TSK_TIMEOUT LOS_ERRNO_OS_FATAL(LOS_MOD_TSK, 0x27)
/**
* @ingroup los_task
* Task error code: A task that is not in the current process.
*
* Value: 0x02000228
*
* Solution: tasks that are not part of the current process are not allowed to operate.
*/
#define LOS_ERRNO_TSK_NOT_SELF_PROCESS LOS_ERRNO_OS_FATAL(LOS_MOD_TSK, 0x28)
/**
* @ingroup los_task
* @brief Define the type of a task entrance function.
*
* @par Description:
* This API is used to define the type of a task entrance function and call it after a task is created and triggered.
* @attention None.
*
* @param param1 [IN] Type #UINTPTR The first parameter passed to the task handling function.
* @param param2 [IN] Type #UINTPTR The second parameter passed to the task handling function.
* @param param3 [IN] Type #UINTPTR The third parameter passed to the task handling function.
* @param param4 [IN] Type #UINTPTR The fourth parameter passed to the task handling function.
*
* @retval None.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see
*/
typedef VOID *(*TSK_ENTRY_FUNC)(UINTPTR param1,
UINTPTR param2,
UINTPTR param3,
UINTPTR param4);
/**
* @ingroup los_task
* You are not allowed to add any fields and adjust fields to the structure
*/
typedef struct {
UINTPTR userArea;
UINTPTR userSP;
UINTPTR userMapBase;
UINT32 userMapSize;
} UserTaskParam;
/**
* @ingroup los_task
* Define the structure of the parameters used for task creation.
*
* Information of specified parameters passed in during task creation.
*/
typedef struct tagTskInitParam {
TSK_ENTRY_FUNC pfnTaskEntry; /**< Task entrance function */
UINT16 usTaskPrio; /**< Task priority */
UINT16 policy; /**< Task policy */
UINTPTR auwArgs[4]; /**< Task parameters, of which the maximum number is four */
UINT32 uwStackSize; /**< Task stack size */
CHAR *pcName; /**< Task name */
#if (LOSCFG_KERNEL_SMP == YES)
UINT16 usCpuAffiMask; /**< Task cpu affinity mask */
#endif
UINT32 uwResved; /**< It is automatically deleted if set to LOS_TASK_STATUS_DETACHED.
It is unable to be deleted if set to 0. */
UINT16 consoleID; /**< The console id of task belongs */
UINT32 processID;
UserTaskParam userParam;
} TSK_INIT_PARAM_S;
/**
* @ingroup los_task
* Task name length
*
*/
#define LOS_TASK_NAMELEN 32
/**
* @ingroup los_task
* Task information structure.
*
*/
typedef struct tagTskInfo {
CHAR acName[LOS_TASK_NAMELEN]; /**< Task entrance function */
UINT32 uwTaskID; /**< Task ID */
UINT16 usTaskStatus; /**< Task status */
UINT16 usTaskPrio; /**< Task priority */
VOID *pTaskSem; /**< Semaphore pointer */
VOID *pTaskMux; /**< Mutex pointer */
VOID *taskEvent; /**< Event */
UINT32 uwEventMask; /**< Event mask */
UINT32 uwStackSize; /**< Task stack size */
UINTPTR uwTopOfStack; /**< Task stack top */
UINTPTR uwBottomOfStack; /**< Task stack bottom */
UINTPTR uwSP; /**< Task SP pointer */
UINT32 uwCurrUsed; /**< Current task stack usage */
UINT32 uwPeakUsed; /**< Task stack usage peak */
BOOL bOvf; /**< Flag that indicates whether a task stack overflow occurs */
} TSK_INFO_S;
/**
* @ingroup los_task
* @brief Create a task and suspend.
*
* @par Description:
* This API is used to create a task and suspend it. This task will not be added to the queue of ready tasks
* before resume it.
*
* @attention
* <ul>
* <li>During task creation, the task control block and task stack of the task that is previously automatically deleted
* are deallocated.</li>
* <li>The task name is a pointer and is not allocated memory.</li>
* <li>If the size of the task stack of the task to be created is 0, configure #LOSCFG_BASE_CORE_TSK_DEFAULT_STACK_SIZE
* to specify the default task stack size. The stack size should be a reasonable value, if the size is too large, may
* cause memory exhaustion.</li>
* <li>The task stack size must be aligned on the boundary of 8 bytes. The size is determined by whether it is big
* enough to avoid task stack overflow.</li>
* <li>Less parameter value indicates higher task priority.</li>
* <li>The task name cannot be null.</li>
* <li>The pointer to the task executing function cannot be null.</li>
* <li>The two parameters of this interface is pointer, it should be a correct value, otherwise, the system may be
* abnormal.</li>
* </ul>
*
* @param taskID [OUT] Type #UINT32 * Task ID.
* @param initParam [IN] Type #TSK_INIT_PARAM_S * Parameter for task creation.
*
* @retval #LOS_ERRNO_TSK_ID_INVALID Invalid Task ID, param taskID is NULL.
* @retval #LOS_ERRNO_TSK_PTR_NULL Param initParam is NULL.
* @retval #LOS_ERRNO_TSK_NAME_EMPTY The task name is NULL.
* @retval #LOS_ERRNO_TSK_ENTRY_NULL The task entrance is NULL.
* @retval #LOS_ERRNO_TSK_PRIOR_ERROR Incorrect task priority.
* @retval #LOS_ERRNO_TSK_STKSZ_TOO_LARGE The task stack size is too large.
* @retval #LOS_ERRNO_TSK_STKSZ_TOO_SMALL The task stack size is too small.
* @retval #LOS_ERRNO_TSK_TCB_UNAVAILABLE No free task control block is available.
* @retval #LOS_ERRNO_TSK_NO_MEMORY Insufficient memory for task creation.
* @retval #LOS_OK The task is successfully created.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* <ul><li>los_config.h: the header file that contains system configuration items.</li></ul>
* @see LOS_TaskDelete
*/
extern UINT32 LOS_TaskCreateOnly(UINT32 *taskID, TSK_INIT_PARAM_S *initParam);
/**
* @ingroup los_task
* @brief Create a task.
*
* @par Description:
* This API is used to create a task. If the priority of the task created after system initialized is higher than
* the current task and task scheduling is not locked, it is scheduled for running.
* If not, the created task is added to the queue of ready tasks.
*
* @attention
* <ul>
* <li>During task creation, the task control block and task stack of the task that is previously automatically
* deleted are deallocated.</li>
* <li>The task name is a pointer and is not allocated memory.</li>
* <li>If the size of the task stack of the task to be created is 0, configure #LOSCFG_BASE_CORE_TSK_DEFAULT_STACK_SIZE
* to specify the default task stack size.</li>
* <li>The task stack size must be aligned on the boundary of 8 bytes. The size is determined by whether it is big
* enough to avoid task stack overflow.</li>
* <li>Less parameter value indicates higher task priority.</li>
* <li>The task name cannot be null.</li>
* <li>The pointer to the task executing function cannot be null.</li>
* <li>The two parameters of this interface is pointer, it should be a correct value, otherwise, the system may be
* abnormal.</li>
* </ul>
*
* @param taskID [OUT] Type #UINT32 * Task ID.
* @param initParam [IN] Type #TSK_INIT_PARAM_S * Parameter for task creation.
*
* @retval #LOS_ERRNO_TSK_ID_INVALID Invalid Task ID, param taskID is NULL.
* @retval #LOS_ERRNO_TSK_PTR_NULL Param initParam is NULL.
* @retval #LOS_ERRNO_TSK_NAME_EMPTY The task name is NULL.
* @retval #LOS_ERRNO_TSK_ENTRY_NULL The task entrance is NULL.
* @retval #LOS_ERRNO_TSK_PRIOR_ERROR Incorrect task priority.
* @retval #LOS_ERRNO_TSK_STKSZ_TOO_LARGE The task stack size is too large.
* @retval #LOS_ERRNO_TSK_STKSZ_TOO_SMALL The task stack size is too small.
* @retval #LOS_ERRNO_TSK_TCB_UNAVAILABLE No free task control block is available.
* @retval #LOS_ERRNO_TSK_NO_MEMORY Insufficient memory for task creation.
* @retval #LOS_OK The task is successfully created.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* <ul><li>los_config.h: the header file that contains system configuration items.</li></ul>
* @see LOS_TaskDelete
*/
extern UINT32 LOS_TaskCreate(UINT32 *taskID, TSK_INIT_PARAM_S *initParam);
/**
* @ingroup los_task
* @brief Resume a task.
*
* @par Description:
* This API is used to resume a suspended task.
*
* @attention
* <ul>
* <li>If the task is delayed or blocked, resume the task without adding it to the queue of ready tasks.</li>
* <li>If the priority of the task resumed after system initialized is higher than the current task and task scheduling
* is not locked, it is scheduled for running.</li>
* </ul>
*
* @param taskID [IN] Type #UINT32 Task ID. The task id value is obtained from task creation.
*
* @retval #LOS_ERRNO_TSK_ID_INVALID Invalid Task ID
* @retval #LOS_ERRNO_TSK_NOT_CREATED The task is not created.
* @retval #LOS_ERRNO_TSK_NOT_SUSPENDED The task is not suspended.
* @retval #LOS_OK The task is successfully resumed.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see LOS_TaskSuspend
*/
extern UINT32 LOS_TaskResume(UINT32 taskID);
/**
* @ingroup los_task
* @brief Suspend a task.
*
* @par Description:
* This API is used to suspend a specified task, and the task will be removed from the queue of ready tasks.
*
* @attention
* <ul>
* <li>The task that is running and locked cannot be suspended.</li>
* <li>The idle task and swtmr task cannot be suspended.</li>
* </ul>
*
* @param taskID [IN] Type #UINT32 Task ID. The task id value is obtained from task creation.
*
* @retval #LOS_ERRNO_TSK_OPERATE_IDLE Check the task ID and do not operate on the idle task.
* @retval #LOS_ERRNO_TSK_SUSPEND_SWTMR_NOT_ALLOWED Check the task ID and do not operate on the swtmr task.
* @retval #LOS_ERRNO_TSK_ID_INVALID Invalid Task ID
* @retval #LOS_ERRNO_TSK_NOT_CREATED The task is not created.
* @retval #LOS_ERRNO_TSK_ALREADY_SUSPENDED The task is already suspended.
* @retval #LOS_ERRNO_TSK_SUSPEND_LOCKED The task being suspended is current task and task scheduling
* is locked.
* @retval #LOS_OK The task is successfully suspended.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see LOS_TaskResume
*/
extern UINT32 LOS_TaskSuspend(UINT32 taskID);
/**
* @ingroup los_task
* @brief Delete a task.
*
* @par Description:
* This API is used to delete a specified task and release the resources for its task stack and task control block.
*
* @attention
* <ul>
* <li>The idle task and swtmr task cannot be deleted.</li>
* <li>If delete current task maybe cause unexpected error.</li>
* <li>If a task get a mutex is deleted or automatically deleted before release this mutex, other tasks pended
* this mutex maybe never be shchduled.</li>
* </ul>
*
* @param taskID [IN] Type #UINT32 Task ID. The task id value is obtained from task creation.
*
* @retval #LOS_ERRNO_TSK_OPERATE_IDLE Check the task ID and do not operate on the idle task.
* @retval #LOS_ERRNO_TSK_SUSPEND_SWTMR_NOT_ALLOWED Check the task ID and do not operate on the swtmr task.
* @retval #LOS_ERRNO_TSK_ID_INVALID Invalid Task ID
* @retval #LOS_ERRNO_TSK_NOT_CREATED The task is not created.
* @retval #LOS_ERRNO_TSK_DELETE_LOCKED The task being deleted is current task and task scheduling
* is locked.
* @retval #LOS_OK The task is successfully deleted.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see LOS_TaskCreate | LOS_TaskCreateOnly
*/
extern UINT32 LOS_TaskDelete(UINT32 taskID);
/**
* @ingroup los_task
* @brief Delay a task.
*
* @par Description:
* This API is used to delay the execution of the current task. The task is able to be scheduled after it is delayed
* for a specified number of Ticks.
*
* @attention
* <ul>
* <li>The task fails to be delayed if it is being delayed during interrupt processing or it is locked.</li>
* <li>If 0 is passed in and the task scheduling is not locked, execute the next task in the queue of tasks with
* the same priority of the current task.
* If no ready task with the priority of the current task is available, the task scheduling will not occur, and the
* current task continues to be executed.</li>
* <li>Using the interface before system initialized is not allowed.</li>
* <li>DO NOT call this API in software timer callback. </li>
* </ul>
*
* @param tick [IN] Type #UINT32 Number of Ticks for which the task is delayed.
*
* @retval #LOS_ERRNO_TSK_DELAY_IN_INT The task delay occurs during an interrupt.
* @retval #LOS_ERRNO_TSK_DELAY_IN_LOCK The task delay occurs when the task scheduling is locked.
* @retval #LOS_ERRNO_TSK_ID_INVALID Invalid Task ID
* @retval #LOS_ERRNO_TSK_YIELD_NOT_ENOUGH_TASK No tasks with the same priority is available for scheduling.
* @retval #LOS_OK The task is successfully delayed.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see
*/
extern UINT32 LOS_TaskDelay(UINT32 tick);
/**
* @ingroup los_task
* @brief Lock the task scheduling.
*
* @par Description:
* This API is used to lock the task scheduling. Task switching will not occur if the task scheduling is locked.
*
* @attention
* <ul>
* <li>If the task scheduling is locked, but interrupts are not disabled, tasks are still able to be interrupted.</li>
* <li>One is added to the number of task scheduling locks if this API is called. The number of locks is decreased by
* one if the task scheduling is unlocked. Therefore, this API should be used together with LOS_TaskUnlock.</li>
* </ul>
*
* @param None.
*
* @retval None.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see LOS_TaskUnlock
*/
extern VOID LOS_TaskLock(VOID);
/**
* @ingroup los_task
* @brief Unlock the task scheduling.
*
* @par Description:
* This API is used to unlock the task scheduling. Calling this API will decrease the number of task locks by one.
* If a task is locked more than once, the task scheduling will be unlocked only when the number of locks becomes zero.
*
* @attention
* <ul>
* <li>The number of locks is decreased by one if this API is called. One is added to the number of task scheduling
* locks if the task scheduling is locked. Therefore, this API should be used together with LOS_TaskLock.</li>
* </ul>
*
* @param None.
*
* @retval None.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see LOS_TaskLock
*/
extern VOID LOS_TaskUnlock(VOID);
/**
* @ingroup los_task
* @brief Set a task priority.
*
* @par Description:
* This API is used to set the priority of a specified task.
*
* @attention
* <ul>
* <li>If the set priority is higher than the priority of the current running task, task scheduling
* probably occurs.</li>
* <li>Changing the priority of the current running task also probably causes task scheduling.</li>
* <li>Using the interface to change the priority of software timer task and idle task is not allowed.</li>
* <li>Using the interface in the interrupt is not allowed.</li>
* </ul>
*
* @param taskID [IN] Type #UINT32 Task ID. The task id value is obtained from task creation.
* @param taskPrio [IN] Type #UINT16 Task priority.
*
* @retval #LOS_ERRNO_TSK_PRIOR_ERROR Incorrect task priority.Re-configure the task priority
* @retval #LOS_ERRNO_TSK_OPERATE_IDLE Check the task ID and do not operate on the idle task.
* @retval #LOS_ERRNO_TSK_ID_INVALID Invalid Task ID
* @retval #LOS_ERRNO_TSK_NOT_CREATED The task is not created.
* @retval #LOS_OK The task priority is successfully set to a specified priority.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see LOS_TaskPriSet
*/
extern UINT32 LOS_TaskPriSet(UINT32 taskID, UINT16 taskPrio);
/**
* @ingroup los_task
* @brief Set the priority of the current running task to a specified priority.
*
* @par Description:
* This API is used to set the priority of the current running task to a specified priority.
*
* @attention
* <ul>
* <li>Changing the priority of the current running task probably causes task scheduling.</li>
* <li>Using the interface to change the priority of software timer task and idle task is not allowed.</li>
* <li>Using the interface in the interrupt is not allowed.</li>
* </ul>
*
* @param taskPrio [IN] Type #UINT16 Task priority.
*
* @retval #LOS_ERRNO_TSK_PRIOR_ERROR Incorrect task priority.Re-configure the task priority
* @retval #LOS_ERRNO_TSK_OPERATE_IDLE Check the task ID and do not operate on the idle task.
* @retval #LOS_ERRNO_TSK_ID_INVALID Invalid Task ID
* @retval #LOS_ERRNO_TSK_NOT_CREATED The task is not created.
* @retval #LOS_OK The priority of the current running task is successfully set to a specified
* priority.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see LOS_TaskPriGet
*/
extern UINT32 LOS_CurTaskPriSet(UINT16 taskPrio);
/**
* @ingroup los_task
* @brief Change the scheduling sequence of tasks with the same priority.
*
* @par Description:
* This API is used to move current task in a queue of tasks with the same priority to the tail of the queue of ready
* tasks.
*
* @attention
* <ul>
* <li>At least two ready tasks need to be included in the queue of ready tasks with the same priority. If the
* less than two ready tasks are included in the queue, an error is reported.</li>
* </ul>
*
* @param None.
*
* @retval #LOS_ERRNO_TSK_ID_INVALID Invalid Task ID
* @retval #LOS_ERRNO_TSK_YIELD_NOT_ENOUGH_TASK No tasks with the same priority is available for scheduling.
* @retval #LOS_OK The scheduling sequence of tasks with same priority is
* successfully changed.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see
*/
extern UINT32 LOS_TaskYield(VOID);
/**
* @ingroup los_task
* @brief Obtain a task priority.
*
* @par Description:
* This API is used to obtain the priority of a specified task.
*
* @attention None.
*
* @param taskID [IN] Type #UINT32 Task ID. The task id value is obtained from task creation.
*
* @retval #OS_INVALID The task priority fails to be obtained.
* @retval #UINT16 The task priority.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see LOS_TaskPriSet
*/
extern UINT16 LOS_TaskPriGet(UINT32 taskID);
/**
* @ingroup los_task
* @brief Obtain current running task ID.
*
* @par Description:
* This API is used to obtain the ID of current running task.
*
* @attention
* <ul>
* <li> This interface should not be called before system initialized.</li>
* </ul>
*
* @retval #LOS_ERRNO_TSK_ID_INVALID Invalid Task ID.
* @retval #UINT32 Task ID.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see
*/
extern UINT32 LOS_CurTaskIDGet(VOID);
/**
* @ingroup los_task
* @brief Gets the maximum number of threads supported by the system.
*
* @par Description:
* This API is used to gets the maximum number of threads supported by the system.
*
* @attention
* <ul>
* <li> This interface should not be called before system initialized.</li>
* </ul>
*
* @retval None.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see
*/
extern UINT32 LOS_GetSystemTaskMaximum(VOID);
/**
* @ingroup los_task
* @brief Obtain a task information structure.
*
* @par Description:
* This API is used to obtain a task information structure.
*
* @attention
* <ul>
* <li>One parameter of this interface is a pointer, it should be a correct value, otherwise, the system may be
* abnormal.</li>
* </ul>
*
* @param taskID [IN] Type #UINT32 Task ID. The task id value is obtained from task creation.
* @param taskInfo [OUT] Type #TSK_INFO_S* Pointer to the task information structure to be obtained.
*
* @retval #LOS_ERRNO_TSK_PTR_NULL Null parameter.
* @retval #LOS_ERRNO_TSK_ID_INVALID Invalid task ID.
* @retval #LOS_ERRNO_TSK_NOT_CREATED The task is not created.
* @retval #LOS_OK The task information structure is successfully obtained.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see
*/
extern UINT32 LOS_TaskInfoGet(UINT32 taskID, TSK_INFO_S *taskInfo);
/**
* @ingroup los_task
* @brief Set the affinity mask of the task scheduling cpu.
*
* @par Description:
* This API is used to set the affinity mask of the task scheduling cpu.
*
* @attention
* <ul>
* <li>If any low LOSCFG_KERNEL_CORE_NUM bit of the mask is not setted, an error is reported.</li>
* </ul>
*
* @param uwTaskID [IN] Type #UINT32 Task ID. The task id value is obtained from task creation.
* @param usCpuAffiMask [IN] Type #UINT32 The scheduling cpu mask.The low to high bit of the mask corresponds to
* the cpu number, the high bit that exceeding the CPU number is ignored.
*
* @retval #LOS_ERRNO_TSK_ID_INVALID Invalid task ID.
* @retval #LOS_ERRNO_TSK_NOT_CREATED The task is not created.
* @retval #LOS_ERRNO_TSK_CPU_AFFINITY_MASK_ERR The task cpu affinity mask is incorrect.
* @retval #LOS_OK The task cpu affinity mask is successfully setted.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see LOS_TaskCpuAffiGet
*/
extern UINT32 LOS_TaskCpuAffiSet(UINT32 uwTaskID, UINT16 usCpuAffiMask);
/**
* @ingroup los_task
* @brief Get the affinity mask of the task scheduling cpu.
*
* @par Description:
* This API is used to get the affinity mask of the task scheduling cpu.
*
* @attention None.
*
* @param taskID [IN] Type #UINT32 Task ID. The task id value is obtained from task creation.
*
* @retval #0 The cpu affinity mask fails to be obtained.
* @retval #UINT16 The scheduling cpu mask. The low to high bit of the mask corresponds to the cpu number.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see LOS_TaskCpuAffiSet
*/
extern UINT16 LOS_TaskCpuAffiGet(UINT32 taskID);
/**
* @ingroup los_task
* @brief Get the scheduling policy for the task.
*
* @par Description:
* This API is used to get the scheduling policy for the task.
*
* @attention None.
*
* @param taskID [IN] Type #UINT32 Task ID. The task id value is obtained from task creation.
*
* @retval #-LOS_ESRCH Invalid task id.
* @retval #-LOS_EPERM The process is not currently running.
* @retval #INT32 the scheduling policy.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see LOS_SetTaskScheduler
*/
extern INT32 LOS_GetTaskScheduler(INT32 taskID);
/**
* @ingroup los_task
* @brief Set the scheduling policy and priority for the task.
*
* @par Description:
* This API is used to set the scheduling policy and priority for the task.
*
* @attention None.
*
* @param taskID [IN] Type #UINT32 Task ID. The task id value is obtained from task creation.
* @param policy [IN] Type #UINT16 Task scheduling policy.
* @param priority [IN] Type #UINT16 Task scheduling priority.
*
* @retval -LOS_ESRCH Invalid task id.
* @retval -LOS_EOPNOTSUPP Unsupported fields.
* @retval -LOS_EPERM The process is not currently running.
* @retval #0 Set up the success.
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
* @see LOS_GetTaskScheduler
*/
extern INT32 LOS_SetTaskScheduler(INT32 taskID, UINT16 policy, UINT16 priority);
/**
* @ingroup los_task
* @brief Trigger active task scheduling.
*
* @par Description:
* This API is used to trigger active task scheduling.
*
* @attention None.
*
* @param None
*
* @retval Nobe
* @par Dependency:
* <ul><li>los_task.h: the header file that contains the API declaration.</li></ul>
*/
extern VOID LOS_Schedule(VOID);
#ifdef __cplusplus
#if __cplusplus
}
#endif /* __cplusplus */
#endif /* __cplusplus */
#endif /* _LOS_TASK_H */