xiuos5/board/aiit-riscv64-board/third_party_driver/include/hardware_uarths.h

/* Copyright 2018 Canaan Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @file
 * @brief       Universal Asynchronous Receiver/Transmitter (UART)
 *
 *              The UART peripheral supports the following features:
 *
 *              - 8-N-1 and 8-N-2 formats: 8 data bits, no parity bit, 1 start
 *                bit, 1 or 2 stop bits
 *
 *               - 8-entry transmit and receive FIFO buffers with programmable
 *                watermark interrupts
 *
 *              - 16× Rx oversampling with 2/3 majority voting per bit
 *
 *              The UART peripheral does not support hardware flow control or
 *              other modem control signals, or synchronous serial data
 *              tranfesrs.
 *
 * @note        UART RAM Layout
 *
 * | Address   | Name     | Description                     |
 * |-----------|----------|---------------------------------|
 * | 0x000     | txdata   | Transmit data register          |
 * | 0x004     | rxdata   | Receive data register           |
 * | 0x008     | txctrl   | Transmit control register       |
 * | 0x00C     | rxctrl   | Receive control register        |
 * | 0x010     | ie       | UART interrupt enable           |
 * | 0x014     | ip       | UART Interrupt pending          |
 * | 0x018     | div      | Baud rate divisor               |
 *
 */

/**
* @file hardware_uarths.h
* @brief add from Canaan k210 SDK
*                https://canaan-creative.com/developer
* @version 1.0 
* @author AIIT XUOS Lab
* @date 2021-04-25
*/

#ifndef __HARDWARE_UARTHS_H__
#define __HARDWARE_UARTHS_H__

#include <platform.h>
#include "plic.h"
#include <stddef.h>
#include <stdint.h>

#ifdef __cplusplus
extern "C" {
#endif

/* clang-format off */
/* Register address offsets */
#define UARTHS_REG_TXFIFO (0x00)
#define UARTHS_REG_RXFIFO (0x04)
#define UARTHS_REG_TXCTRL (0x08)
#define UARTHS_REG_RXCTRL (0x0c)
#define UARTHS_REG_IE     (0x10)
#define UARTHS_REG_IP     (0x14)
#define UARTHS_REG_DIV    (0x18)

/* TXCTRL register */
#define UARTHS_TXEN       (0x01)
#define UARTHS_TXWM(x)    (((x) & 0xffff) << 16)

/* RXCTRL register */
#define UARTHS_RXEN       (0x01)
#define UARTHS_RXWM(x)    (((x) & 0xffff) << 16)

/* IP register */
#define UARTHS_IP_TXWM    (0x01)
#define UARTHS_IP_RXWM    (0x02)
/* clang-format on */

typedef struct _uarths_txdata
{
    /* Bits [7:0] is data */
    uint32_t data : 8;
    /* Bits [30:8] is 0 */
    uint32_t zero : 23;
    /* Bit 31 is full status */
    uint32_t full : 1;
} __attribute__((packed, aligned(4))) uarths_txdata_t;

typedef struct _uarths_rxdata
{
    /* Bits [7:0] is data */
    uint32_t data : 8;
    /* Bits [30:8] is 0 */
    uint32_t zero : 23;
    /* Bit 31 is empty status */
    uint32_t empty : 1;
} __attribute__((packed, aligned(4))) uarths_rxdata_t;

typedef struct _uarths_txctrl
{
    /* Bit 0 is txen, controls whether the Tx channel is active. */
    uint32_t txen : 1;
    /* Bit 1 is nstop, 0 for one stop bit and 1 for two stop bits */
    uint32_t nstop : 1;
    /* Bits [15:2] is reserved */
    uint32_t resv0 : 14;
    /* Bits [18:16] is threshold of interrupt triggers */
    uint32_t txcnt : 3;
    /* Bits [31:19] is reserved */
    uint32_t resv1 : 13;
} __attribute__((packed, aligned(4))) uarths_txctrl_t;

typedef struct _uarths_rxctrl
{
    /* Bit 0 is txen, controls whether the Tx channel is active. */
    uint32_t rxen : 1;
    /* Bits [15:1] is reserved */
    uint32_t resv0 : 15;
    /* Bits [18:16] is threshold of interrupt triggers */
    uint32_t rxcnt : 3;
    /* Bits [31:19] is reserved */
    uint32_t resv1 : 13;
} __attribute__((packed, aligned(4))) uarths_rxctrl_t;

typedef struct _uarths_ip
{
    /* Bit 0 is txwm, raised less than txcnt */
    uint32_t txwm : 1;
    /* Bit 1 is txwm, raised greater than rxcnt */
    uint32_t rxwm : 1;
    /* Bits [31:2] is 0 */
    uint32_t zero : 30;
} __attribute__((packed, aligned(4))) uarths_ip_t;

typedef struct _uarths_ie
{
    /* Bit 0 is txwm, raised less than txcnt */
    uint32_t txwm : 1;
    /* Bit 1 is txwm, raised greater than rxcnt */
    uint32_t rxwm : 1;
    /* Bits [31:2] is 0 */
    uint32_t zero : 30;
} __attribute__((packed, aligned(4))) uarths_ie_t;

typedef struct _uarths_div
{
    /* Bits [31:2] is baud rate divisor register */
    uint32_t div : 16;
    /* Bits [31:16] is 0 */
    uint32_t zero : 16;
} __attribute__((packed, aligned(4))) uarths_div_t;

typedef struct _uarths
{
    /* Address offset 0x00 */
    uarths_txdata_t txdata;
    /* Address offset 0x04 */
    uarths_rxdata_t rxdata;
    /* Address offset 0x08 */
    uarths_txctrl_t txctrl;
    /* Address offset 0x0c */
    uarths_rxctrl_t rxctrl;
    /* Address offset 0x10 */
    uarths_ie_t ie;
    /* Address offset 0x14 */
    uarths_ip_t ip;
    /* Address offset 0x18 */
    uarths_div_t div;
} __attribute__((packed, aligned(4))) UarthsT;

typedef enum _uarths_interrupt_mode
{
    UARTHS_SEND = 1,
    UARTHS_RECEIVE = 2,
    UARTHS_SEND_RECEIVE = 3,
} uarths_interrupt_mode_t;

typedef enum _uarths_stopbit
{
    UARTHS_STOP_1,
    UARTHS_STOP_2
} uarths_stopbit_t;

extern volatile UarthsT *const uarths;

/**
 * @brief       Initialization Core UART
 *
 * @return      result
 *     - 0      Success
 *     - Other  Fail
 */
void uarths_init(void);

/**
 * @brief       Put a char to UART
 *
 * @param[in]   c       The char to put
 *
 * @note        If c is '\n', a '\r' will be appended automatically
 *
 * @return      result
 *     - 0      Success
 *     - Other  Fail
 */
int uarths_putchar(char c);

/**
 * @brief       Send a string to UART
 *
 * @param[in]   s       The string to send
 *
 * @note        The string must ending with '\0'
 *
 * @return      result
 *     - 0      Success
 *     - Other  Fail
 */
int uarths_puts(const char *s);


/**
 * @brief       Get a byte from UART
 *
 * @return      byte as int type from UART
 */
int uarths_getc(void);

/**
 * @brief       Set uarths interrupt callback
 *
 * @param[in]    interrupt_mode       Interrupt mode recevice or send
 * @param[in]    uarths_callback      Interrupt callback
 * @param[in]    ctx                  Param of callback
 * @param[in]    priority             Interrupt priority
 *
 */
void uarths_set_irq(uarths_interrupt_mode_t interrupt_mode, plic_irq_callback_t uarths_callback, void *ctx, uint32_t priority);

/**
 * @brief       Uarths receive data
 *
 * @param[in]    buf          The data received
 * @param[in]    BufLen      The length of data
 *
 * @return      Number of received data
 */
size_t uarths_receive_data(uint8_t *buf, size_t BufLen);

/**
 * @brief       Uarths receive data
 *
 * @param[in]    buf          The data sended
 * @param[in]    BufLen      The length of data
 *
 * @return      Number of sended data
 */
size_t uarths_send_data(const uint8_t *buf, size_t BufLen);

/**
 * @brief       Get interrupt mode
 *
 * @return      Mode of interrupt
 */
uarths_interrupt_mode_t uarths_get_interrupt_mode(void);

/**
 * @brief       Set uarths baud rate and stopbit
 *
 * @param[in]    BaudRate        The baud rate
 * @param[in]    stopbit          The stopbit of data
 *
 */
void uarths_config(uint32_t BaudRate, uarths_stopbit_t stopbit);

/**
 * @brief       Set uart interrupt condition
 *
 * @param[in]    interrupt_mode         The interrupt mode
 * @param[in]    cnt                    The count of tigger
 *
 */
void uarths_set_interrupt_cnt(uarths_interrupt_mode_t interrupt_mode, uint8_t cnt);

#ifdef __cplusplus
}
#endif

#endif /* __UARTHS_H__ */